Search NASA⌕ Search

Engineering topics

Grine, Alejandro J.

Publications and source records attributed to Grine, Alejandro J..

At least 19 records

Quantum control and Berry phase of electron spins in rotating levitated diamonds in high vacuum

Levitated diamond particles in high vacuum with internal spin qubits have been proposed for exploring macroscopic quantum mechanics, quantum gravity, and precision measurements. The coupling between spins and particle rotation can be utilized to study quantum geometric phase, create gyroscopes and rotational matter-wave interferometers. However, previous efforts in levitated diamonds struggled with vacuum level or spin state readouts. To address these gaps, we fabricate an integrated surface ion trap with multiple stabilization electrodes. This facilitates on-chip levitation and, for the first time, optically detected magnetic resonance measurements of a nanodiamond levitated in high vacuum. The internal temperature of our levitated nanodiamond remains moderate at pressures below 10 -5 Torr. We have driven a nanodiamond to rotate up to 20 MHz (1.2 × 10 9 rpm), surpassing typical nitrogen-vacancy (NV) center electron spin dephasing rates. Using these NV spins, we observe the effect of the Berry phase arising from particle rotation. In addition, we demonstrate quantum control of spins in a rotating nanodiamond. These results mark an important development in interfacing mechanical rotation with spin qubits, expanding our capacity to study quantum phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-chip photonics transceiver

A photonics transceiver is described herein, wherein the photonics transceiver exhibits improved areal bandwidth density and improved energy per bit consumption relative to conventional photonics transceivers. The photonics transceiver achieves an areal bandwidth density of at least 5 Tbps/mm2 with an energy consumption of less than 500 fJ/bit (sum of energy consumed for both a transmitted bit and a received bit). The photonics transceiver is a multi-chip module, where chips in the multi-chip module are tightly integrated with one another. The multi-chip module includes light source, photodetector, photonics, and control/logic chips. The photonics chip includes transparent conducting oxide integrated optical modulators and multiplexers and demultiplexers based on MEMS-tunable optical ring resonators.

Wood, Michael↗

MEMS-tunable optical ring resonator

A microelectromechanical systems (MEMS)-tunable optical ring resonator is described herein. The ring resonator includes a resonator ring and a tuner ring, along with one or more springs. The springs may be internal or external, i.e., either within or outside the areal footprint of the resonator ring and the tuner ring. The one or more springs are configured to displace the tuner ring from the resonator ring by a desired gap based upon a desired resonant wavelength of the resonator ring. Tuning is implemented by applying a voltage to the ring resonator, with motion of the tuner ring causing a corresponding change in the effective index of the resonator ring. As the ring resonator is essentially a capacitive device, it draws very little power once tuning is achieved.

Wood, Michael↗

Analyzing Custom Proof Masses and Quantum Limits of a Manufacturable Cavity Optical Levitation Solution

This report details results of a one-year LDRD to understand the dynamics, figures of merit, and fabrication possibilities for levitating a micro-scale, disk-shaped dielectric in an optical field. Important metrics are the stability, positional uncertainty, and required optical power to maintain levitation. Much of the results are contained in a publication written by our academic alliance collaborators. Initial structures were grown at Sandia labs and a test fabrication flow was executed. Owing to our strength in VCSEL lasers, we were particularly interested in calculations and fabrication flows that could be compatible with a VCSEL light source.

42 ENGINEERING↗

Narrow-linewidth single-mode vertical-cavity surface-emitting laser

A coupled-cavity vertical-cavity surface-emitting laser (VCSEL) is disclosed. The coupled-cavity VCSEL includes a passive cavity and an additional distributed Bragg Reflector (DBR) not found in conventional VCSELs, all in a monolithic device. By including these two elements, the photon lifetime may be increased by a factor of approximately ten, leading to a reduction in the laser linewidth by a factor of approximately 100 compared to conventional VCSELs. The two additional elements also serve to ensure single-mode operation of the coupled-cavity VCSEL.

Serkland, Darwin K.↗

Optomechanical gyroscope utilizing the Sagnac effect

An apparatus and a method for detecting rotation based on the Sagnac effect is disclosed. Input light having sufficient power is injected into a circulating optical resonator to thereby excite an optomechanical oscillation of the resonator at an instantaneous mechanical angular frequency. Rotation of the circulating optical resonator causes a change in a frequency of the optomechanical oscillation of the resonator, which in turn causes the instantaneous mechanical angular frequency to change. The optomechanical oscillation produces modulation sidebands in the resonating optical field at the instantaneous mechanical angular frequency and harmonics thereof, which are demodulated from the optical frequency by detection in a photodetector. Differences in the instantaneous mechanical angular frequency induced by rotation are detected by processing the photodetector output signal.

47 OTHER INSTRUMENTATION↗