Engineering topics

Groebner, R.

Publications and source records attributed to Groebner, R..

4 records

DOE OSTI2024

Turbulence link to L-mode, I-mode, and H-mode confinement in the DIII-D tokamak

Understanding the physics of low-confinement (L-), improved-confinement (I-), and high-confinement (H-) modes is critical for fusion reactors. The finding herein reports observations of two types of turbulence coexisting near the L-mode edge, one magnetohydrodynamic (MHD)-like and another micro-tearing mode (MTM)-like, linked to the H-mode and I-mode confinement in the DIII-D tokamak. Ion-scale magnetic and density turbulence is measured using a Faraday-effect radial-interferometer-polarimeter and beam-emission-spectroscopy (BES). Broadband turbulence spectra of up to ~600 kHz are observed in two discharges where transitions between L-mode, I-mode, and H-mode occurs. Turbulence is found to be inversely correlated with confinement, meaning lower turbulence power at higher confinement. Distinctively, the high-frequency (HF, >~100 kHz) magnetic turbulence power changes by the most (55%) during transitions primarily involving energy confinement change, whereas the low-frequency (LF, <~100 kHz) magnetic and density turbulence power changes by the most (80%) during transitions primarily involving particle confinement change. The LF turbulence amplitude oscillates with and leads to deuterium-alpha emission oscillations before an H-mode. These results imply that HF turbulence mainly affects energy confinement whereas LF turbulence can affect particle confinement. The magnetic and density turbulence exhibits coherence up to 0.6 and cross-phase magnitude close to π/2 in most cases, suggesting they have a common origin in both the LF and HF ranges. BES suggests that LF turbulence resides at the edge (ρ = 0.95) and HF turbulence can be at the outer core (ρ = 0.8) or edge (ρ = 0.95). Comparisons of measurements, theory, and gyrokinetic simulations suggest that HF turbulence is MTM-like in all cases, whereas LF turbulence is more consistent with MHD-like modes and the exact instability might change during transitions—except that a drift-wave origin is possible in a low collisionality H-mode. These results suggest that the H-mode involves suppressed MHD-like turbulence, whereas the I-mode mitigates MTM-like turbulence along with largely unchanged MHD-like turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

New understanding of inter-ELM pedestal turbulence, transport, and gradient behavior in the DIII-D tokamak

New observations of pedestal localized turbulence in the inter-ELM period of H-mode plasmas in DIII-D show that ion temperature gradient mode scale (ITG-scale) density fluctuation (ñ) increases immediately after each ELM crash and is quickly suppressed during the increase in local E × B shear. This excitation and subsequent suppression of ITG-scale ñ can explain the previously reported anomalous ion heat flux, Qi during the ELM (Viezzer et al 2017 Nucl. Fusion 57 022020). Shorter wavelength trapped electron mode scale (TEM-scale) ñ starts to increase at a critical pedestal temperature gradient (∇Te,ped) and saturates as local E × B shear, ${T}_{\mathrm{i}}^{\mathrm{C}\mathrm{6}+}/{T}_{\mathrm{e}}$ ratio, and ∇Te,ped saturate. This TEM-scale ñ, which has the potential to cause electron (and also ion) heat transport, is consistent with driving an anomalous electron heat flux Qe, where Qe is estimated between ELMs using experimental profiles and power balance. Both ITG- and TEM-scale ñ amplitude variations with background Ti/Te and ∇ne,ped are found to be consistent with theoretical predictions of these measured density fluctuations being ITG and TEM instabilities respectively. Furthermore, these new and unique observations on the nature of turbulence and their potential contributions to electron and ion heat fluxes at different ELM periods (i.e. collapse, recovery, and saturation phases of pedestal gradients) can significantly test and improve our pedestal predictive capabilities for ITER and other future fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Multi-device Studies of Pedestal Physics and Confinement in the I-mode Regime

This paper describes joint ITPA studies of the I-mode regime, which features an edge thermal barrier but with L-mode-like particle and impurity transport, and without ELMs. The regime has been demonstrated on Alcator C-Mod, ASDEX Upgrade and DIII-D tokamaks, over a wide range of device parameters and pedestal conditions, including low collisionality. Access to I-mode is independent of heating method (neutral beam injection, ICRH and/or ECRH). Normalized energy confinement H98y,2 ≥ 1 has been achieved for a range of 3≤q95≤4.9 and scales favourably with power. Changes in turbulence in the pedestal region accompany the transition from L-mode to I-mode. The L-I threshold increases with plasma density and current, and with device size, but weakly with BT. The upper limit of power for I-modes increases with toroidal field, and is largest on Alcator C-Mod at B > 5 T. Issues for extrapolation to ITER and other future fusion devices are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

FY19 FES Theory Performance Target (Final Report)

Understanding the relevant turbulent transport mechanisms at the edge of a high-performance tokamak is essential for predicting and optimizing the H-mode pedestal structure in future burning plasma devices. Global electromagnetic gyrokinetic simulations will be performed based on representative experimental pedestal scenarios in order to clarify which instabilities are most important for each of the particle and heat transport channels. Edge transport modeling will be performed in order to estimate and bound the particle and heat sources—e.g., the ionization density source and the atomic energy loss channels due to ionization, charge exchange, and radiation. Comparisons will be made with data from the DIII-D, JET, C-Mod and NSTX or MAST experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗