Engineering topics
Grosvenor, Andrew P
Publications and source records attributed to Grosvenor, Andrew P.
An investigation of the Fe and Mo oxidation states in Sr[subscript 2]Fe[subscript 2]Mo[subscript x]O[subscript 6] (0.25 [less than] x [less than] 1.0) double perovskites by X-ray absorption spectroscopy
Sr{sub 2}FeMoO{sub 6} double perovskite systems are widely studied because of their interesting and technologically relevant physical properties. Sr{sub 2}FeMoO{sub 6} is just a single composition in the Sr{sub 2}Fe{sub 2-x}Mo{sub x}O{sub 6} solid-solution, and it is important to understand how the composition impacts the transition-metal valence states. Variations in the lattice parameters of these materials were studied using powder X-ray diffraction and it was found that a large change in the lattice constant occurs between Sr{sub 2}Fe{sub 1.50}Mo{sub 0.50}O{sub 6} and Sr{sub 2}Fe{sub 1.35}Mo{sub 0.65}O{sub 6} that likely coincides with a transition from a cubic to a tetragonal unit cell, in agreement with previous studies. Fe K- and Mo K-edge X-ray absorption near-edge spectra were also collected to investigate how the oxidation state and coordination environment change with composition. When the Mo content is low, Fe adopts a 3+ oxidation state and Mo adopts a 6+ oxidation state. As the Mo content is increased, the Fe and Mo cations are both partially reduced, resulting in a mixture of Fe{sup 3+} and Fe{sup 2+} and Mo{sup 5+} and Mo{sup 6+}. The reduction of the metal centers apparently drives the change in unit cell. The influence of preparation method on the oxidation states of Fe and Mo was also investigated by annealing the materials under vacuum. The results reported here show that the oxidation states of Fe and Mo are strongly impacted by both composition and preparation method, which may account for the wide variety of oxidation state and magnetic properties that have been reported previously.
Determining the effect of Ru substitution on the thermal stability of CeFe[subscript 4-x]Ru[subscript x]Sb[subscript 12]
The ternary, rare-earth filled (RE) Skutterudites (REM{sub 4}Pn{sub 12}; M = Fe-Os; Pn = P-Sb) have been proposed for use in high-temperature thermoelectric devices to convert waste heat to useful power. CeFe{sub 4}Sb{sub 12} has been one of the most popular materials proposed for this application; however, it oxidizes at relatively low temperatures. The thermal stability of Skutterudites can be enhanced by selective substitution of the constituent elements and Eu(Fe,Ru){sub 4}Sb{sub 12} variants have been found to oxidize at temperatures above that of CeFe{sub 4}Sb{sub 12}. Unfortunately, these materials have poor thermoelectric properties. In this study, the thermal stability of CeFe{sub 4-x}Ru{sub x}Sb{sub 12} was examined depending on the value of x. (These compounds have similar thermoelectric properties to those of CeFe{sub 4}Sb{sub 12}.) It has been found by use of TGA and XANES that the temperature at which point CeFe{sub 4-x}Ru{sub x}Sb{sub 12} oxidizes increases with greater Ru substitution. XANES was also used to confirm the general charge assignment of Ce{sup 3+}Fe{sub 4-x}{sup 2+}Ru{sub x}{sup 2+}Sb{sub 12}{sup 1-}.
Investigation of coordination changes in substituted transition-metal oxides by K-edge XANES: beyond the pre-edge
Transition-metal oxides are important materials whose properties can be tuned through selective substitution of the constituent elements. For oxygen deficient materials, substitution can lead to variations in coordination number (CN). To understand these changes in CN, the pre-edge peak intensity, resulting primarily from a 1s to n-1d transition, from first-row transition-metal K-edge XANES spectra can be used. However, investigation of these peaks from spectra of second-row transition-metals can be difficult owing to lower spectral resolutions. It is shown here, through examination of Ca{sub 2}Fe{sub 2-x}Ga{sub x}O{sub 5}, SrFe{sub 1-x}Zr{sub x}O{sub 3-{delta}}, and (ZrO{sub 2}){sub x}(SiO{sub 2}){sub 1-x}, that changes in CN also lead to significant variations of the main absorption edge.
On the oxidation of EuFe[subscript 4]Sb[subscript 12] and EuRu[subscript 4]Sb[subscript 12]
Rare-earth-filled transition-metal pnictides having the skutterudite-type structure have been proposed for use as high-temperature thermoelectric materials to recover waste heat from vehicle exhaust, among other applications. A previous investigation by this research group of one of the most studied skutterudites, CeFe{sub 4}Sb{sub 12}, found that, when exposed to air, this material oxidized at temperatures that are considerably below the proposed maximum operating temperature. Here, by the combined use of TGA, powder XRD, and XANES, it has been found that the substitution of Ce{sup 3+} and Fe{sup 2+} for larger rare-earth and transition-metal elements (Eu{sup 2+} and Ru{sup 2+}) results in a significantly higher oxidation temperature compared to that of CeFe{sub 4}Sb{sub 12}. This increase can be related to the increased orbital overlap provided by these larger atoms (Eu{sup 2+} and Ru{sup 2+} vs Ce{sup 3+} and Fe{sup 2+}), enabling the development of stronger bonds. These results show how selective substitution of the constituent elements can significantly improve the thermal stability of materials.
Examination of CeFe[subscript 4]Sb[subscript 12] upon exposure to air: Is this material appropriate for use in terrestrial, high-temperature thermoelectric devices?
The rare-earth (RE) filled skutterudites (e.g., CeFe{sub 4}Sb{sub 12}) have been proposed for use in the next-generation of high-temperature thermoelectric devices. In this investigation, the influence of air exposure on the stability of CeFe{sub 4}Sb{sub 12} has been studied for temperatures ranging from 300 K to 1073 K. Examination of the material after exposure to air at these temperatures using thermogravimetric analysis, powder X-ray diffraction, and X-ray absorption near-edge spectroscopy has shown that above 573 K, CeFe{sub 4}Sb{sub 12} decomposes and then rapidly oxidizes. This temperature is much lower than the maximum operating temperature proposed for high-temperature thermoelectric devices used to recover the waste heat from vehicle exhaust systems (700-773 K).
Effects of bond character on the electronic structure of brownmillerite-phase oxides, Ca[subscript 2] [prime]B[subscript x]Fe[subscript 2-x]O[subscript 5] (B = Al, Ga): an X-ray absorption and electron energy loss spectroscopic study
Brownmillerite-phase transition-metal oxides, Ca{sub 2}B'{sub x}Fe{sub 2-x}O{sub 5} (B' = Al, Ga), have been examined by use of X-ray absorption near-edge spectroscopy (XANES) and electron energy loss spectroscopy (EELS). These studies were performed to examine how the electronic structure was affected as a more (Ga) or less (Al) electronegative metal was substituted for Fe. The oxygen deficient perovskite-like structure is built up of alternating layers having either octahedrally or tetrahedrally coordinated metal atoms. Analysis of the Fe L-, Ga K-, and Al L-edge XANES and EELS spectra confirmed that the group III metals substitute primarily into the tetrahedral site, regardless of the size of the atoms. Through examination of O K-edge spectra, compared to LMTO calculated crystal orbital Hamilton population plots, the change in O-metal bond character with substitution was investigated. It was found that in Ca{sub 2}Ga{sub x}Fe{sub 2-x}O{sub 5}, the peaks in the O K-edge spectra resulting from an excitation of O 1s electrons into hybridized, unoccupied, O 2p-Ga 4p/4s antibonding states decreased in energy and increased in intensity with greater values of x. This is a result of the formation of more covalent O-Ga bonds. No shifts in energy were observed in O K-edge spectra from Ca{sub 2}Al{sub x}Fe{sub 2-x}O{sub 5} as the more ionic O-Al states are overlapped by stronger O-Ca antibonding states. This study shows that the electronic structure of these materials is tunable through selective substitution of metals into the tetrahedral site.