Search NASA⌕ Search

Engineering topics

Grover, Mike

Publications and source records attributed to Grover, Mike.

Nevada National Security Site Site-Directed Research and Development Report (FY 2018 Annual Report)

This report compiles multiple articles describing activities developed and performed under the Site-Directed Research and Development Program for the benefit the Nation during Fiscal Year 2018. Sustained investment and ongoing core innovation are the keys to successful research and development programs. These elements drive the Site-Directed Research and Development (SDRD) Program and provide solutions to some of the most challenging problems our nation and our allies face. Our Nevada enterprise, consisting of both our management and operating entity and our NNSA field office, is aggressively investing in SDRD and injecting innovation through strategic partnerships. Our partnerships with universities, industry, and our sister institutions within the National Nuclear Security Administration (NNSA) build upon our core capabilities and allow us to create innovative solutions to support our mission requirements. In 2018, we raised the investment level of SDRD for only the second time in the history of the program. Nearly at our congressionally authorized limit, SDRD has substantial resources to successfully address numerous issues. Investment is only one part of the equation; innovation is generated through collaborations that bring discovery and provide the “technical differentiation” and the return on investment we seek. This report demonstrates an enduring theme of how partnerships help us drive the best outcomes and provide the maximum impact possible, while using our resources efficiently.

36 MATERIALS SCIENCE↗

Ejecta transport, breakup and conversion

Here, we report experimental results from an initial study of reactive and nonreactive metal fragments—ejecta—transporting in vacuum, and in reactive and nonreactive gases. We postulate that reactive metal fragments ejected into a reactive gas, such as H 2 , will break up into smaller fragments in situations where they are otherwise hydrodynamically stable in a nonreactive gas such as He. To evaluate the hypothesis we machined periodic perturbations onto thin Ce and Zn coupons and then explosively shocked them to eject hot, micron-scale fragments from the perturbations. The ejecta masses were diagnosed with piezoelectric pressure transducers, and their transport in H 2 and He was imaged with visible and infrared (IR) cameras. Because Ce + H 2 → CeH 2 + ΔH, where ΔH is the enthalpy of formation, an observed increase of the relative IR (radiance) temperature T R between the Ce–H 2 and Ce–He gas systems can be used to estimate the amount of Ce that converts to CeH 2 . As a result, the experiments sought to determine whether dynamic chemical effects should be included in ejecta-transport models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Μeasurements of Sn Ejecta Particle-Size Distributions Using Ultraviolet In-line Fraunhofer Holography

Sn ejecta particle-size distributions from the break-up of a microsheet in a vacuum will be presented. The micro-sheet was created from a high explosive driven shock wave passing through a precision groove machined into a Sn sample. The particle-size measurements were carried out using an ultraviolet in-line Fraunhofer holography diagnostic. In conclusion, the diagnostic will be presented along with particle-size distributions over most of the ejecta velocities throughout the microsheet.

36 MATERIALS SCIENCE↗

Sagebrush boom box soft radiography results

Presentation describes series of shots done at Special Technologies Laboratory in Santa Barbara, CA, using a high-explosive load on tin as a confirmatory study to quantitatively compare diagnostics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Time-Resolved Phase Transition Kinetics STL-03-15, Year 1 of 1

Presentation describes shock compression experiments performed to measure the dynamic reflectance of light from the surface of tin samples shocked through the β to BCT (body centered tetragonal) solid-solid polymorphic phase transition near 9 GPa, using a technique that extrapolates the low- and high-pressure behavior of reflectance through the mixed phase, allowing researchers to infer the value of the mixed-phase fraction.

36 MATERIALS SCIENCE↗

High-Resolution UV Holography Lens for Particle Size Distribution Measurements

A high-resolution UV holography relay lens, shown in Figure 1, has been developed for measuring particle size distributions down to 0.5 μm in a 12-mm-diameter by 5-mm-thick volume. This work has been selected by an independent judging panel and editors of R&D Magazine as a recipient of a 2009 R&D 100 Award. This award recognizes the 100 most technologically significant products introduced during the past year.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design, Assembly, and Testing of a High-Resolution Relay Lens Used for Holography with Operation at Both Doubled and Tripled Nd:YAG Laser Wavelengths

The design and assembly of a nine-element lens that achieves >2000 lp/mm resolution at a 355-nm wavelength (ultraviolet) has been completed. By adding a doublet to this lens system, operation at a 532-nm wavelength (green) with >1100 lp/mm resolution is achieved. This lens is used with high-power laser light to record holograms of fast-moving ejecta particles from a shocked metal surface located inside a test package. Part of the lens and the entire test package are under vacuum with a 1-cm air gap separation. Holograms have been recorded with both doubled and tripled Nd:YAG laser light. The UV operation is very sensitive to the package window’s tilt. If this window is tilted by more than 0.1 degrees, the green operation performs with better resolution than that of the UV operation. The setup and alignment are performed with green light, but the dynamic recording can be done with either UV light or green light. A resolution plate can be temporarily placed inside the test package so that a television microscope located beyond the hologram position can archive images of resolution patterns that prove that the calibration wires, interference filter, holographic plate, and relay lenses are in their correct positions. Part of this lens is under vacuum, at the point where the laser illumination passes through a focus. Alignment and tolerancing of this high-resolution lens are presented. Resolution variation across the 12-mm field of view and throughout the 5-mm depth of field is discussed for both wavelengths.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗