Engineering topics

Gruber, Mark B.

Publications and source records attributed to Gruber, Mark B..

4 records

NASA NTRS2016

Methods for Preparing Nanoparticle-Containing Thermoplastic Composite Laminates

High quality thermoplastic composites and composite laminates containing nanoparticles and/or nanofibers, and methods of producing such composites and laminates are disclosed. The composites comprise a thermoplastic polymer and a plurality of nanoparticles, and may include a fibrous structural reinforcement. The composite laminates are formed from a plurality of nanoparticle-containing composite layers and may be fused to one another via an automated process.

Gruber, Mark B.↗

NASA NTRS2008

Tape Placement Head for Applying Thermoplastic Tape to an Object

A tape placement head for applying thermoplastic tape to an object includes a heated feeder which guides the tape/tow to a heated zone. The heated zone has a line compactor having a single row of at least one movable heated member. An area compactor is located in the heated zone downstream from the line compactor. The area compactor includes a plurality of rows of movable feet which are extendable toward the tape/tow different distances with respect to each other to conform to the shape of the object. A shim is located between the heated compactors and the tape/tow. A chilled compactor is in a chilled zone downstream from the heated zone. The chilled zone includes a line chilled compactor and an area chilled compactor. A chilled shim is mounted between the chilled compactor and the tape/tow.

Cope, Ralph D.↗

NASA NTRS2006

Optimal Composite Material for Low Cost Fabrication of Large Composite Aerospace Structures using NASA Resins or POSS Nanoparticle Modifications

Thermoplastic laminates in situ consolidated via tape or tow placement require full mechanical properties. Realizing full properties requires resin crystallinity to be controlled - partial crystallinity leads to unacceptably low laminate compression properties. There are two approaches: utilize an amorphous matrix resin; or place material made from a semi-crystalline resin featuring kinetics faster than the process. In this paper, a matrix resin evaluation and trade study was completed with commercial and NASA amorphous polyimides on the one hand, and with PEKK mixed with POSS nanoparticles for accelerated crystallinity growth on the other. A new thermoplastic impregnated material, 6 mm wide (0.25-in) AS-4 carbon/LaRC(TradeMark)8515 dry polyimide tow, was fabricated. Since LaRC(TradeMark)8515 is fully amorphous, it attains full properties following in situ consolidation, with no post processing required to build crystallinity. The tow in situ processing was demonstrated via in situ thermoplastic filament winding it into rings.

Lamontia, Mark A.↗

NASA NTRS2003

Developing A Contoured Deposition Head for In-Situ Tape Laying and Fiber Placement

A conformable compaction system employing three individual compactors has been designed for integration into fiber placement and tape laying deposition heads for out-of-autoclave fabrication of thermoplastic contoured parts. The compactors are intended to perform against two geometry specifications: (1) a general minimum radius of curvature limit of 180cm (71-in), and (2) a pad-up specification with a maximum height of 2.5mm (0.1-in) and a minimum ramp of 2.5mm (1-in). The mirrored specification is applicable to a pan-down. The three designs include a hot line compactor capable of a 1000N (400-lb) force at 450C over a 114mm (4.5-in) width, a hot area compactor capable of a 400N (100-lb) force at 450C over a 114mm width by 76mm length (4.5-in by 3-in), and a cold compactor that combines the features of a line and an area compactor. The cold compactor s line segments act with a 2800N (700-lb) force across a 127mm (5-in) width, while the cold compactor's area segments act with a 1000N (250-lb) force over a 127mm by 102mm (5-in by 4-in) area. Two of the designs, the hot line and hot area compactors, have been constructed, developed, and proven out in hot mode to compact actual thermoplastic composite plies over undulating geometry. IM-7PEEK [0/90/0/90]s pan-down and IM-7PEEK [0/-45/90/45]2s pad-up laminates have been fabricated and photomicrographs show good microstructure.

Lamontia, Mark A.↗