Engineering topics
Gu, Lei
Publications and source records attributed to Gu, Lei.
Reconsidering spin-phonon relaxation in magnetic molecules
Because of the larger intra-molecular distortion, optical phonons usually have stronger spin-phonon coupling than acoustic phonons in molecular magnets. This property may pose problems to the theory of spin relaxation in ordinary paramagnetic materials, which have served as the basis for the understanding of spin dynamics in molecular magnets for decades. In this review, we explain why the Raman processes driven by optical phonons can play a dominant role at low temperature and provide unconventional dependence between relaxation time and temperature. Especially, we emphasize that the sub-barrier relaxation and anomalously low Raman exponents are two common signatures of the dominance. Here, we also present the algorithm and implementation for calculating spin-phonon relaxation in molecular solids with density functional theory codes.
Nanoscale imaging of phonon dynamics by electron microscopy
Spatially resolved vibrational mapping of nanostructures is indispensable to the development and understanding of thermal nanodevices, modulation of thermal transport and novel nanostructured thermoelectric materials. Through the engineering of complex structures, such as alloys, nanostructures and superlattice interfaces, one can significantly alter the propagation of phonons and suppress material thermal conductivity while maintaining electrical conductivity. There have been no correlative experiments that spatially track the modulation of phonon properties in and around nanostructures due to spatial resolution limitations of conventional optical phonon detection techniques. Here we demonstrate two-dimensional spatial mapping of phonons in a single silicon–germanium (SiGe) quantum dot (QD) using monochromated electron energy loss spectroscopy in the transmission electron microscope. Tracking the variation of the Si optical mode in and around the QD, we observe the nanoscale modification of the composition-induced red shift. We observe non-equilibrium phonons that only exist near the interface and, furthermore, develop a novel technique to differentially map phonon momenta, providing direct evidence that the interplay between diffuse and specular reflection largely depends on the detailed atomistic structure: a major advancement in the field. Our work unveils the non-equilibrium phonon dynamics at nanoscale interfaces and can be used to study actual nanodevices and aid in the understanding of heat dissipation near nanoscale hotspots, which is crucial for future high-performance nanoelectronics.
Slow spin relaxation in single endohedral fullerene molecules
Well-protected magnetization, tunable quantum states, and long spin-relaxation time are desired for the use of magnetic molecules in spintronics and quantum information technologies. In this work, endohedral fullerene molecules M@C 28 with different transition-metal cores were explored through systematic first-principles calculations and spin dynamics analyses. Many of them have bias-tunable structure, stable magnetization, and sizable magnetic anisotropy energy. Furthermore, some of them may have spin-relaxation time up to several milliseconds for their quantum spin states at high temperature (~10 K) after full consideration of spin-vibration couplings. In conclusion, our results suggest that these M@C 28 provide a rich pool of single-molecule magnets for diverse applications.
Single-defect phonons imaged by electron microscopy
Crystal defects affect the thermal and heat-transport properties of materials by scattering phonons and modifying phonon spectra. To appreciate how imperfections in solids influence thermal conductivity and diffusivity, it is thus essential to understand phonon–defect interactions. Sophisticated theories are available to explore such interactions, but experimental validation is limited because most phonon-detecting spectroscopic methods do not reach the high spatial resolution needed to resolve local vibrational spectra near individual defects. In this paper, we demonstrate that space- and angle-resolved vibrational spectroscopy in a transmission electron microscope makes it possible to map the vibrational spectra of individual crystal defects. We detect a red shift of several millielectronvolts in the energy of acoustic vibration modes near a single stacking fault in cubic silicon carbide, together with substantial changes in their intensity, and find that these changes are confined to within a few nanometres of the stacking fault. These observations illustrate that the capabilities of a state-of-the-art transmission electron microscope open the door to the direct mapping of phonon propagation around defects, which is expected to provide useful guidance for engineering the thermal properties of materials.
Origin of the anomalously low Raman exponents in single molecule magnets
The Raman exponent of single molecular magnetic relaxation may take various unexpected values because of rich phonon spectra and spin-phonon coupling of molecular crystals. Here, we systematically examine the origins of different abnormalities and clarify misunderstandings of the past, particularly the appropriateness of the fitting procedures for the exponents. We find that exponential laws raised by optical phonons can yield spurious power laws with low exponents. This observation indicates long-standing misunderstandings of the origins of low Raman exponents in a large bulk of single molecule magnets. Resulting from spin-lattice coupling with optical modes, the presence of these exponents suggests the importance of the local dynamical environment for the magnetic relaxation in this regime.
Density functional study of relaxation of adsorbate vibration modes: Dominance of anharmonic interaction
Formulation and density functional workflow for calculating the lifetime of vibrational modes of molecular adsorbates on solid surfaces due to vibration–phonon coupling are presented. The anharmonic coupling is invoked to give the correct description of the origin of temperature dependence. Using pyrrolidine (C 4 H 9 N) absorbed on the Cu(001) surface as a concrete example, here we show that the anharmonic coupling can be one to two orders more significant than the harmonic interaction for the broadening of vibrational spectra, especially as temperature increases. These results challenge the common assumption that the anharmonic interaction is weak and call for attention of considering its effect in quantum relaxation and related problems.
Giant magnetic anisotropy energy and long coherence time of uranium substitution on defected Al 2 O 3 (0001)
Nanomagnets with giant magnetic anisotropy energy and long coherence time are desired for various technological innovations such as quantum information procession and storage. Based on the first-principles calculations and model analyses, we demonstrate that a single uranium atom substituting Al on the Al 2 O 3 (0001) surface may have high structural stability and large magnetic anisotropy energy up to 48 meV per uranium atom. As the magnetization resides in the localized $\textit{f}$ shell and is not much involved in chemical bonding with neighbors, long coherence time up to ~1.6mS can be achieved for the quantum spin states. These results in this work suggest a different strategy for the search of ultrasmall magnetic units for diverse applications in the quantum information era.
Control of magnetic properties of MnBi 2 Te 4 using a van der Waals ferroelectric III 2 -VI 3 film and biaxial strain
Using the first-principles calculations, we systematically investigated magnetic properties of a MnBi 2 Te 4 (MBT) monolayer in contact with III 2 -VI 3 two-dimensional ferroelectric substrates. As the electric polarization in the ferroelectric films is switched, a semiconductor to half-metal transition occurs in MBT, and its magnetic easy axis in several cases reorients. As an example, the Curie temperature of MBT/In 2 Se 3 can be enhanced to 21.5 or 32 K under the influence of electric polarization and biaxial strain, much higher than that of the pristine MBT monolayer, which is 14.5 K in our calculations. Our results in this work suggest effective ways to tune magnetic properties of MBT and provide useful insights for the further development of these important van der Waals functional materials.
Transition-metal phthalocyanine monolayers as new Chern insulators
To explore new materials for the realization of the quantum anomalous Hall effect (QAHE), we studied the electronic, magnetic and topological properties of transition-metal phthalocyanine (TMPc) monolayers in a square lattice. Many of them have large topologically nontrivial band gaps and integer Chern numbers. In particular, the Fermi level of MoPc lies right in the band gap (E g = 8.1 meV) and has large magnetic anisotropy energy (MAE = 2.0 meV per Mo atom) and a Curie temperature of 16 K, showing its usefulness for applications. The presence of the topologically protected edge state in a MoPc nanoribbon further confirms it as a new two-dimensional topological insulator. This much widens the search for QAHE materials for the design of quantum devices.
Reply to ‘Increases in temperature do not translate to increased flooding’
Replying to Wasko et al. Nature Communications https://doi.org/10.1038/s41467-019-13613-4 (2019). We are thankful for the interest of Wasko et al.1 in our work2. The correspondence from Wasko et al. argued that our finding on the positive scaling rate between storm runoff extremes and temperature can be mainly attributed to snowmelt processes, and claimed that storm runoff extremes should have a negative scaling rate globally. However, we do not agree with their arguments for several reasons.
Unexpected Strong Thermally Induced Phonon Energy Shift for Mapping Local Temperature
Measuring temperature in nanoscale is crucial for the research and development of microelectronic devices. Plasmon resonance has been utilized to map local temperature gradient in metallic materials (Al) due to their large coefficients of thermal expansion. However, most semiconductors (including Si and SiC) possess much smaller coefficients of thermal expansion due to their strong covalent bonding in crystal structure, for which the plasmon-based temperature measurement becomes unreliable. Here, we report an unexpected strong, thermally induced phonon energy shift in SiC by spatially resolved vibrational spectroscopy in transmission electron microscopy with in situ heating, demonstrating that this shift can be applied as a useful tool for measuring nanoscale temperature. When a bulk phonon spectrum is used, the spatial resolution of vibrational spectroscopy can be as high as one nanometer. Molecular dynamics simulations reveal that lattice expansion only contributes a small fraction of phonon energy shift and that vibrant motions away from the bonds are predominate factors. In conclusion, this study gains deeper insight into the understanding of dynamic behaviors of the phonon and provides a new avenue to measure local temperature in nanodevices.
Comprehensive Report on Design and Development of a 100-kW DSSRM
Switched reluctance machines (SRMs) are low cost and fault tolerant alternatives for traction applications. Due to their relatively low torque density and high torque ripple, these machines have not been used in commercialized electrified power trains yet. The double-stator magnetic configuration, where a segmental rotor shared between two stators, is proven to have superior torque density, lower acoustic noise, and torque pulsation. The double-stator SRM (DSSRM) has a high potential of being the next generation of traction motors since it combines the advantages of permanent magnet-free machines, such as low cost and independence from supply chain issues associated with rare metals, while providing high torque and power densities. In this paper, we introduce the complete design process of a 100-kW DSSRM including electromagnetic, structural, thermal, and system level design. The performance of the developed DSSRM is verified with the experimental data. This paper presents overall study of DSSRM and describes merits of DSSRM drive system.
Nontrivial Nature and Penetration Depth of Topological Surface States in SmB 6 Thin Films
The nontrivial feature and penetration depth of the topological surface states (TSS) in SmB 6 were studied via spin pumping. The experiments used SmB 6 thin films grown on the bulk magnetic insulator Y 3 Fe 5 O 12 (YIG). Upon the excitation of magnetization precession in the YIG, a spin current is generated in the SmB 6 that produces, via spin--orbit coupling, a lateral electrical voltage in the film. This spin-pumping voltage signal becomes considerably stronger as the temperature decreases from 150 to 10 K, and such an enhancement most likely originates from the spin-momentum locking of the TSS and may thereby serve as evidence for the nontrivial nature of the TSS. The voltage data also show a unique film thickness dependence that suggests a TSS depth of ~32 nm. Finally, the spin--pumping results arc supported by transport measurements and analyses using a tight binding model.
How to control spin-Seebeck current in a metal-quantum dot-magnetic insulator junction
The control of the spin-Seebeck current is still a challenging task for the development of spin caloritronic devices. In this work, we construct a spin-Seebeck device by inserting a quantum dot (QD) between the metal lead and magnetic insulator. Using the slave-particle approach and noncrossing approximation, we find that the spin-Seebeck effect increases significantly when the energy level of the QD locates near the Fermi level of the metal lead due to the enhancement of spin flipping and occurrences of quantum resonance. Since this can be easily realized by applying a gate voltage in experiments, the spin-Seebeck device proposed here can also work as a thermovoltaic transistor. Moreover, the optimal correlation strength and the energy level position of the QD are discussed to maximize the spin-Seebeck current as required for applications in controllable spin caloritronic devices.
Energy consumption analysis of constant voltage and constant current operations in capacitive deionization
Here we report our studies to compare energy consumption of a CDI cell in constant voltage (CV) and constant current (CC) operations, with a focus on understanding the underlying physics of consumption patterns. The comparison is conducted under conditions that the CV and CC operations result in the same amounts of input charge and within identical charging phase durations. We present two electrical circuit models to simulate energy consumption in charging phase: one is a simple RC circuit model, and the other a transmission line circuit model. We built and tested a CDI cell to validate the transmission line model, and performed a series of experiments to compare CV versus CC operation under the condition of equal applied charge and charging duration. The experiments show that CC mode consumes energy at 33.8 kJ per mole of ions removed, which is only 28% of CV mode energy consumption (120.6 kJ/mol), but achieves similar level of salt removals. Lastly, together, the models and experiment support our major conclusion that CC is more energy efficient than CV for equal charge and charging duration. The models also suggest that the lower energy consumption of CC in charging is due to its lower resistive dissipation.
Design for a spin-Seebeck diode based on two-dimensional materials
Studies of the spin-Seebeck effect (SSE) are very important for the development of fundamental science and novel low-power-consumption technologies. The spin-Seebeck diode (SSD), in which the spin current can be driven by a forward temperature gradient but not by a reverse temperature gradient, is a key unit in spin caloritronic devices. Here, we propose a SSD design using two-dimensional (2D) materials such as silicene and phosphorene nanoribbons as the source and drain. Due to their unique band structures and magnetic states, thermally driven spin-up and spin-down currents flow in opposite directions. This mechanism is different from that of the previous one, which uses two permalloy circular disks, and the SSD in our design can be easily integrated with gate voltage control. Moreover, since the concept of this design is rather general and applicable to many 2D materials, it is promising for the realization and exploitation of SSDs in nanodevices.