Search NASA⌕ Search

Engineering topics

Gu, Lin

Publications and source records attributed to Gu, Lin.

At least 55 records · Page 3

Reaction inhomogeneity coupling with metal rearrangement triggers electrochemical degradation in lithium-rich layered cathode

High-energy density lithium-rich layered oxides are among the most promising candidates for next-generation energy storage. Unfortunately, these materials suffer from severe electrochemical degradation that includes capacity loss and voltage decay during long-term cycling. Present research efforts are primarily focused on understanding voltage decay phenomena while origins for capacity degradation have been largely ignored. Here, we thoroughly investigate causes for electrochemical performance decline with an emphasis on capacity loss in the lithium-rich layered oxides, as well as reaction pathways and kinetics. Advanced synchrotron-based X-ray two-dimensional and three-dimensional imaging techniques are combined with spectroscopic and scattering techniques to spatially visualize the reactivity at multiple length-scales on lithium- and manganese-rich layered oxides. These methods provide direct evidence for inhomogeneous manganese reactivity and ionic nickel rearrangement. Coupling deactivated manganese with nickel migration provides sluggish reaction kinetics and induces serious structural instability in the material. Our findings provide new insights and further understanding of electrochemical degradation, which serve to facilitate cathode material design improvements.

25 ENERGY STORAGE↗

Reversible dual anionic-redox chemistry in NaCrSSe with fast charging capability

Utilizing the anionic redox reaction opens new approaches for the development of new cathode materials with extra capacities. Although, it suffers from several obstacles such as voltage hysteresis and sluggish kinetics. In this paper, a new layered chalcogenide-based on dual anionic-redox reaction is reported. The newly designed layered NaCrSSe exhibits the capacity of almost all Na + intercalation/deintercalation (137 mAh/g -1 at 50 mA/g), and a unique charge/discharge feature with a small polarization of 0.15 V and high energy efficiency of ~92% in initial cycles. Furthermore, a superior high-rate charge capacity of 115.5mAh/g -1 (83.7% retention) was achieved at 27.8 C (4000 mA/g -1 ). Systematic characterization studies on structure evolution and DFT calculation show the charge compensation of S and Se anions during cycling. Overall, these results will enrich the anion redox chemistry and provide valuable information for developing new anion-redox based cathode materials with high capacity and fast kinetics.

25 ENERGY STORAGE↗

A medium-range structure motif linking amorphous and crystalline states

Amorphous materials have no long-range order, but there are ordered structures at short range (2–5 Å), medium range (5–20 Å) and even longer length scales. While regular and semiregular polyhedra are often found as short-range ordering in amorphous materials, the nature of medium-range order has remained elusive. Consequently, it is difficult to determine whether there exists any structural link at medium range or longer length scales between the amorphous material and its crystalline counterparts. Moreover, an amorphous material often crystallizes into a phase of different composition, with very different underlying structural building blocks, further compounding the issue. Here, we capture an intermediate crystalline cubic phase in a Pd-Ni-P amorphous alloy and reveal the structure of the medium-range order, a six-membered tricapped trigonal prism cluster (6M-TTP) with a length scale of 12.5 Å. We find that the 6M-TTP can pack periodically to several tens of nanometres to form the cube phase. Our experimental observations provide evidence of a structural link between the amorphous and crystalline phases in a Pd-Ni-P alloy at the medium-range length scale and suggest that it is the connectivity of the 6M-TTP clusters that distinguishes the crystalline and amorphous phases. These findings will shed light on the structure of amorphous materials at extended length scales beyond that of short-range order.

36 MATERIALS SCIENCE↗

Evoking ordered vacancies in metallic nanostructures toward a vacated Barlow packing for high-performance hydrogen evolution

Metallic nanostructures are commonly densely packed into a few packing variants with slightly different atomic packing factors. The structural aspects and physicochemical properties related with the vacancies in such nanostructures are rarely explored because of lack of an effective way to control the introduction of vacancy sites. Highly voided metallic nanostructures with ordered vacancies are however energetically high lying and very difficult to synthesize. Here, we report a chemical method for synthesis of hierarchical Rh nanostructures (Rh NSs) composed of ultrathin nanosheets, composed of hexagonal close-packed structure embedded with nanodomains that adopt a vacated Barlow packing with ordered vacancies. The obtained Rh NSs exhibit remarkably enhanced electrocatalytic activity and stability toward the hydrogen evolution reaction (HER) in alkaline media. Theoretical calculations reveal that the exceptional electrocatalytic performance of Rh NSs originates from their unique vacancy structures, which facilitate the adsorption and dissociation of H 2 O in the HER.

36 MATERIALS SCIENCE↗

Dimensional Control of Octahedral Tilt in SrRuO 3 via Infinite-Layered Oxides

Manipulation of octahedral distortion at atomic scale is an effective means to tune the ground states of functional oxides. Previous work demonstrates that strain and film thickness are variable parameters to modify the octahedral parameters. However, selective control of bonding geometry by structural propagation from adjacent layers is rarely studied. Here we propose a new route to tune the ferromagnetism in SrRuO 3 (SRO) ultrathin layers by oxygen coordination of adjacent SrCuO 2 (SCO) layers. The infinite-layered CuO 2 exhibits a structural transformation from “planar-type” to “chain-type” with reduced film thickness. Two orientations dramatically modify the polyhedral connectivity at the interface, thus altering the octahedral distortion of SRO. The local structural variation changes the spin state of Ru and orbital hybridization strength, leading to a significant change in the magnetoresistance and anomalous Hall resistivity. Furthermore, these findings could launch investigations into adaptive control of functionalities in quantum oxide heterostructures using oxygen coordination.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Realization of AlSb in the Double-Layer Honeycomb Structure: A Robust Class of Two-Dimensional Material

Exploring new two-dimensional (2D) van der Waals (vdW) systems is at the forefront of materials physics. Here, through molecular beam epitaxy on graphene-covered SiC(0001), we report successful growth of AlSb in the double-layer honeycomb (DLHC) structure, a 2D vdW material which has no direct analogue to its 3D bulk and is predicted kinetically stable when freestanding. The structural morphology and electronic structure of the experimental 2D AlSb are characterized with spectroscopic imaging scanning tunneling microscopy and cross-sectional imaging scanning transmission electron microscopy, which compare well to the proposed DLHC structure. The 2D AlSb exhibits a bandgap of 0.93 eV versus the predicted 1.06 eV, which is substantially smaller than the 1.6 eV of bulk. We also attempt the less-stable InSb DLHC structure; however, it grows into bulk islands instead. Here, the successful growth of a DLHC material here opens the door for the realization of a large family of novel 2D DLHC traditional semiconductors with unique excitonic, topological, and electronic properties.

36 MATERIALS SCIENCE↗

Proximate Quantum Spin Liquid on Designer Lattice

Complementary to bulk synthesis, here we propose a designer lattice with extremely high magnetic frustration and demonstrate the possible realization of a quantum spin liquid state from both experiments and theoretical calculations. In an ultrathin (111) CoCr 2 O 4 slice composed of three triangular and one kagome cation planes, the absence of a spin ordering or freezing transition is demonstrated down to 0.03 K, in the presence of strong antiferromagnetic correlations in the energy scale of 30 K between Co and Cr sublattices, leading to the frustration factor of similar to 1000. Persisting spin fluctuations are observed at low temperatures via low-energy muon spin relaxation. Our calculations further demonstrate the emergence of highly degenerate magnetic ground states at the 0 K limit, due to the competition among multiply altered exchange interactions. Furthermore, these results collectively indicate the realization of a proximate quantum spin liquid state on the synthetic lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Activating Layered Metal Oxide Nanomaterials via Structural Engineering as Biodegradable Nanoagents for Photothermal Cancer Therapy

Layered metal oxides including MoO 3 and WO 3 have been widely explored for biological applications owing to their excellent biocompatibility, low toxicity, and easy preparation. However, they normally exhibit weak or negligible near-infrared (NIR) absorption and thus are inefficient for photo-induced biomedical applications. Herein, the structural engineering of layered MoO 3 and WO 3 nanostructures is first reported to activate their NIR-II absorption for efficient photothermal cancer therapy in the NIR-II window. White-colored micrometre-long MoO 3 nanobelts are transformed into blue-colored short, thin, defective, interlayer gap-expanded MoO 3–x nanobelts with a strong NIR-II absorption via the simple lithium treatment. The blue MoO 3–x nanobelts exhibit a large extinction coefficient of 18.2 L g –1 cm –1 and high photothermal conversion efficiency of 46.9% at 1064 nm. After surface modification, the MoO 3–x nanobelts can be used as a robust nanoagent for photoacoustic imaging-guided photothermal therapy to achieve efficient cancer cell ablation and tumor eradication under irradiation by a 1064 nm laser. Importantly, the biodegradable MoO 3–x nanobelts can be rapidly degraded and excreted from body. We report the study highlights that the structural engineering of layered metal oxides is a powerful strategy to tune their properties and thus boost their performances in given applications.

36 MATERIALS SCIENCE↗

Direct Observation of Defect‐Aided Structural Evolution in a Nickel‐Rich Layered Cathode

Abstract Ni‐rich LiNi 1− x − y Mn x Co y O 2 (NMC) layered compounds are the dominant cathode for lithium ion batteries. The role of crystallographic defects on structure evolution and performance degradation during electrochemical cycling is not yet fully understood. Here, we investigated the structural evolution of a Ni‐rich NMC cathode in a solid‐state cell by in situ transmission electron microscopy. Antiphase boundary (APB) and twin boundary (TB) separating layered phases played an important role on phase change. Upon Li depletion, the APB extended across the layered structure, while Li/transition metal (TM) ion mixing in the layered phases was detected to induce the rock‐salt phase formation along the coherent TB. According to DFT calculations, Li/TM mixing and phase transition were aided by the low diffusion barriers of TM ions at planar defects. This work reveals the dynamical scenario of secondary phase evolution, helping unveil the origin of performance fading in Ni‐rich NMC.

Li, Shuang↗

Direct observation of defect-aided structural evolution in Ni-rich layered cathode

Ni-rich LiNi 1-x-y Mn x Co y O 2 (NMC) layered compounds have become the dominated cathode for lithium ion batteries. The role of crystallographic defects on their structure evolution and consequent performance degradation during electrochemical cycling is not yet fully understood. In this work, we investigated the structural evolution of Ni-rich NMC cathode in a solid-state cell via in-situ transmission electron microscopy. We identified antiphase boundary (APB) and twin boundary (TB) separating layered phases played an important role on phase change. Upon the lithium depletion, the APB extends across the layered structure, while Li/transition metal (TM) ion mixing in the layered phases is detected to induce the rock-salt phase formation along the coherent TB. According to DFT calculations, Li/TM mixing and phase transition are aided by the low diffusion barriers of TM ions at planar defects. Finally, this work reveals the dynamical scenario of secondary phase evolution, which helps to unveil the origin of performance fading in Ni-rich NMC.

25 ENERGY STORAGE↗

Fully Exploited Oxygen Redox Reaction by the Inter-Diffused Cations in Co-Free Li-Rich Materials for High Performance Li-Ion Batteries

To meet the growing demand for global electrical energy storage, high-energy-density electrode materials are required for Li-ion batteries. To overcome the limit of the theoretical energy density in conventional electrode materials based solely on the transition metal redox reaction, the oxygen redox reaction in electrode materials has become an essential component because it can further increase the energy density by providing additional available electrons. However, the increase in the contribution of the oxygen redox reaction in a material is still limited due to the lack of understanding its controlled parameters. Here, it is first proposed that Li-transition metals (TMs) inter-diffusion between the phases in Li-rich materials can be a key parameter for controlling the oxygen redox reaction in Li-rich materials. The resulting Li-rich materials can achieve fully exploited oxygen redox reaction and thereby can deliver the highest reversible capacity leading to the highest energy density, ≈1100 Wh kg -1 among Co-free Li-rich materials. The strategy of controlling Li/transition metals (TMs) inter-diffusion between the phases in Li-rich materials will provide feasible way for further achieving high-energy-density electrode materials via enhancing the oxygen redox reaction for high-performance Li-ion batteries.

25 ENERGY STORAGE↗

Constructing an Adaptive Heterojunction as a Highly Active Catalyst for the Oxygen Evolution Reaction

Electrochemical water splitting is of prime importance to green energy technology. Particularly, the reaction at the anode side, namely the oxygen evolution reaction (OER), requires a high overpotential associated with O—O bond formation, which dominates the energy-efficiency of the whole process. Activating the anionic redox chemistry of oxygen in metal oxides, which involves the formation of superoxo/peroxo-like (O 2 ) n – , commonly occurs in most highly active catalysts during the OER process. Here, a highly active catalyst is designed: electrochemically delithiated LiNiO 2 , which facilitates the formation of superoxo/peroxo-like (O 2 ) n – species, i.e., NiOO*, for enhancing OER activity. The OER-induced surface reconstruction builds an adaptive heterojunction, where NiOOH grows on delithiated LiNiO 2 (delithiated-LiNiO 2 /NiOOH). At this junction, the lithium vacancies within the delithiated LiNiO 2 optimize the electronic structure of the surface NiOOH to form stable NiOO* species, which enables better OER activity. This finding provides new insight for designing highly active catalysts with stable superoxo-like/peroxo-like (O 2 ) n – for water oxidation.

36 MATERIALS SCIENCE↗

An In Situ Formed Surface Coating Layer Enabling LiCoO 2 with Stable 4.6 V High‐Voltage Cycle Performances

Abstract The development of high‐voltage LiCoO 2 is essential for achieving lithium‐ion batteries with high volumetric energy density, however, it faces a great deal of challenges owing to the materials, structure and interfacial instability issues. In this work, a strategy is developed, through heat annealing a precoated surface layer to in situ form a high‐voltage‐stable surface coating layer, which is demonstrated to be highly effective to improve the high‐voltage performance of LiCoO 2 . It is discovered that LiCoO 2 reacts with Li 1.5 Al 0.5 Ti 1.5 (PO 4 ) 3 (LATP) at 700 °C to form exclusively spinel phases in addition to Li 3 PO 4 , which are structurally coherent to the layered lattice of LiCoO 2 . The heat annealing of the precoated thin layer of LATP enables the formation of a high‐quality surface layer. Spinel phases possess high‐voltage‐stable structures with much weaker oxidizing ability of lattice oxygen than layered structure. In addition, the Li 3 PO 4 is a good lithium‐ion conductor with excellent chemical stability at high voltages. All these benefits contribute to the construction of a uniform and conformal high‐voltage‐stable surface layer with favorable lithium conducting kinetics at the LiCoO 2 surface. The modified LiCoO 2 shows excellent 4.6 V high‐voltage cycle performance at both room temperature and 45 °C. The thermal stability is greatly enhanced as well.

Wang, Yi↗