Engineering topics
Gu, X.
Publications and source records attributed to Gu, X..
Proton beam lifetime increase with 10- and 12-pole correctors in the Relativistic Heavy Ion Collider
10- and 12-pole correctors were installed in a number of machines and are also considered for future machines. In the Relativistic Heavy Ion Collider (RHIC) 10- and 12-pole correctors exist to correct for the detrimental effects of magnetic field errors in the interaction region magnets. These field errors in conjunction with beam-beam effects and parameter modulations dominate the beam lifetime in polarized proton operation. During the 2009 polarized proton run 10- and 12-pole correctors were set through an iterative procedure, and used for the first time operationally in one of the beams. We report on the procedure to set these high-order multipole correctors, compare the found values with calculated ones, estimate the effect of the new corrector settings on the integrated luminosity, and calculate the effect of both the calculated and experimentally found corrector strengths on the dynamic aperture.
Proton beam lifetime increase with 10- and 12-pole correctors in the Relativistic Heavy Ion Collider
10- and 12-pole correctors were installed in a number of machines and are also considered for future machines. In the Relativistic Heavy Ion Collider (RHIC) 10- and 12-pole correctors exist to correct for the detrimental effects of magnetic field errors in the interaction region magnets. These field errors in conjunction with beam-beam effects and parameter modulations dominate the beam lifetime in polarized proton operation. During the 2009 polarized proton run 10- and 12-pole correctors were set through an iterative procedure, and used for the first time operationally in one of the beams. We report on the procedure to set these high-order multipole correctors, compare the found values with calculated ones, estimate the effect of the new corrector settings on the integrated luminosity, and calculate the effect of both the calculated and experimentally found corrector strengths on the dynamic aperture.
Dynamic aperture calculations for the 2012 RHIC 100 GeV polarized proton run
In this article, we summarize the dynamic aperture calculations for the 2012 RHIC 100 GeV polarized proton run. We varied β ∗ at the interaction action points, calculated the off-momentum dynamic aperture, and investigated the dependence of dynamic aperture on the proton bunch intensity and the proton beam transverse emittance. Based on the off-line optics model, we also applied second order chromaticity correction in the Yellow ring and compared the calculated dynamic apertures without and with the correction. In the end we compared the off-momentum dynamic apertures with different voltages of 197 MHz Landau RF cavity.
Dynamic Aperture Calculations for the 2012 RHIC 100 Gev Polarized Proton Run
In this article, we summarize the dynamic aperture calculations for the 2012 RHIC 100 GeV polarized proton run. We varied β* at the interaction action points, calculated the off-momentum dynamic aperture, and investigated the dependence of dynamic aperture on the proton bunch intensity and the proton beam transverse emittance. Based on the off-line optics model, we also applied second order chromaticity correction in the Yellow ring and compared the calculated dynamic apertures without and with the correction. In the end we compared the off-momentum dynamic apertures with different voltages of 197 MHz Landau RF cavity.
Examination of a Size-Change Test for Photovoltaic Encapsulation Materials: Preprint
We examine a proposed test standard that can be used to evaluate the maximum representative change in linear dimensions of sheet encapsulation products for photovoltaic modules (resulting from their thermal processing). The proposed protocol is part of a series of material-level tests being developed within Working Group 2 of the Technical Committee 82 of the International ElectrotechnicalCommission. The characterization tests are being developed to aid module design (by identifying the essential characteristics that should be communicated on a datasheet), quality control (via internal material acceptance and process control), and failure analysis. Discovery and interlaboratory experiments were used to select particular parameters for the size-change test. The choice of a sandsubstrate and aluminum carrier is explored relative to other options. The temperature uniformity of +/- 5C for the substrate was confirmed using thermography. Considerations related to the heating device (hot-plate or oven) are explored. The time duration of 5 minutes was identified from the time-series photographic characterization of material specimens (EVA, ionomer, PVB, TPO, and TPU). Thetest procedure was revised to account for observed effects of size and edges. The interlaboratory study identified typical size-change characteristics, and also verified the absolute reproducibility of +/- 5% between laboratories.
Subcycle Controlled Charge-Directed Reactivity with Few-Cycle Midinfrared Pulses
Not Available
The effects of phase advances between interaction points
In this note we perform simulation studies to investigate the effects of betatron phase advances between the beam-beam interaction points on half-integer resonance driving term, second order chromaticty and dynamic aperture in RHIC. The betatron phase advances are adjusted with artificial matrices inserted in the middle of arcs. The lattices for the 2011 RHIC polarized proton (p-p) run and 2010 RHIC Au-Au runs are used. We also scan the phase advances between IP8 and the electron lens for the proposed Blue ring lattice with head-on beam-beam compensation.
The effects of phase advances between interaction points
In this note we perform simulation studies to investigate the effects of betatron phase advances between the beam-beam interaction points on half-integer resonance driving term, second order chromaticty and dynamic aperture in RHIC. The betatron phase advances are adjusted with artificial matrices inserted in the middle of arcs. The lattices for the 2011 RHIC polarized proton (p-p) run and 2010 RHIC Au-Au runs are used. We also scan the phase advances between IP8 and the electron lens for the proposed Blue ring lattice with head-on beam-beam compensation.
RHIC electron lens beam transport system design considerations
To apply head-on beam-beam compensation for RHIC, two electron lenses are designed and will be installed at IP6 and IP8. Each electron lens has several sub-systems, including electron gun, electron collector, superconducting main solenoid (SM), diagnostics system and power supply system. In addition to these systems, beam transport system which can transport electron beam from electron gun side to collector side is also needed.
Head-on beam-beam compensation in RHIC
Head-on beam-beam compensation with electron lenses had been proposed for the SSC, LHC, and the Tevatron [1,2]. Two electron lenses are installed in the Tevatron [2-4], where they are routinely used as gap cleaner and have been tested in many other configurations. In RHIC there are 2 head-on beam-beam interactions at IP6 and IP8, and 4 long-range beam-beam interactions with large separation (10 mm) at the other IPs. We consider the partial indirect compensation of the head-on beam-beam effect with one electron lens in each ring. Together with intensity and emittance upgrades [5,6] our goal is to approximately double the luminosity over what can be achieved without these upgrades. A RHIC electron lens consists of: a DC electron gun, an electron beam transport to the main solenoid, the superconducting main solenoid in which the interaction with the hadron beam occurs, an electron beam transport to the collector, and an electron collector. The 2 electron lenses are located in IR10 between the DX beam separation dipoles. The proton beams pass through the main solenoids of both electron lenses, and interact head-on with one of them. The following is a slightly modified version of Ref. [7]. The table shows the main parameters of the proton beam and the electron lenses. References [8-11] present simulations for and discuss beam dynamics problems.
Dynamic Aperture Calculation for 100 GeV Au-Au and 250GeV pp Lattices with Near Third Order Resonance Working Point
In the preparation for the 2011 RHIC 250 GeV polarized proton (pp) run, both experiment and simulation were carried out to investigate the possibility to accelerate the proton beam with a vertical tune near 2/3. It had been found experimentally in Run-9 that accelerating the proton beam with a vertical tune close to 2/3 will greatly benefit the transmission of the proton polarization. In this note, we report the calculated dynamic apertures with the 100 GeV Au run and 250 GeV proton run lattices with vertical tunes close to the third order resonance. We will compare the third order resonance band width between the beam experiment and the simulation with the 100 GeV Au lattices. And we also will compare the calculated resonance band width between the 100 GeV Au and 250 GeV proton run lattices.
Laboratory Studies on the Formation of Carbon-Bearing Molecules in Extraterrestrial Environments: From the Gas Phase to the Solid State
A detailed knowledge of the formation of carbon-bearing molecules in interstellar ices and in the gas phase of the interstellar medium is of paramount interest to understand the astrochemical evolution of extraterrestrial environments (1). This research also holds strong implications to comprehend the chemical processing of Solar System environments such as icy planets and their moons together with the atmospheres of planets and their satellites (2). Since the present composition of each interstellar and Solar System environment reflects the matter from which it was formed and the processes which have changed the chemical nature since the origin (solar wind, planetary magnetospheres, cosmic ray exposure, photolysis, chemical reactions), a detailed investigation of the physicochemical mechanisms altering the pristine environment is of paramount importance to grasp the contemporary composition. Once these underlying processes have been unraveled, we can identify those molecules, which belonged to the nascent setting, distinguish molecular species synthesized in a later stage, and predict the imminent chemical evolution of, for instance, molecular clouds. Laboratory experiments under controlled physicochemical conditions (temperature, pressure, chemical composition, high energy components) present ideal tools for simulating the chemical evolution of interstellar and Solar System environments. Here, laboratory experiments can predict where and how (reaction mechanisms; chemicals necessary) in extraterrestrial environments and in the interstellar medium complex, carbon bearing molecules can be formed on interstellar grains and in the gas phase. This paper overviews the experimental setups utilized in our laboratory to mimic the chemical processing of gas phase and solid state (ices) environments. These are a crossed molecular beams machine (3) and a surface scattering setup (4). We also present typical results of each setup (formation of amino acids, aldehydes, epoxides; synthesis of hydrogen terminated carbon chains as precursors to complex PAHs and to carbonaceous dust grains in general; nitriles as precursor to amino acids).