Search NASA⌕ Search

Engineering topics

Guest, J. E.

Publications and source records attributed to Guest, J. E..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Geologic Mapping of V-19

A geologic map of the Sedna Planitia (V-19) quadrangle is being completed at 1:5,000,000 scale as part of the NASA Planetary Geologic Mapping Program, and will be submitted for review by September 2010. Overview: The Sedna Planitia quadrangle (V-19) extends from 25 N - 50 N latitude, 330 - 0 longitude. The quadrangle contains the northernmost portion of western Eistla Regio and the Sedna Planitia lowlands. Sedna Planitia consists of low-lying plains units, with numerous small volcanic edifices including shields, domes and cones. The quadrangle also contains several tholi, the large flowfield Neago Fluctus, the Manzan-Gurme Tesserae, and Zorile Dorsa and Karra-mahte Fossae which run NW-SE through the southwestern part of the quadrangle. There are six coronae in the quadrangle (Table 1), the largest of which is Nissaba (300 km x 220 km), and there are fourteen impact craters (Table 2). The V-19 quadrangle contains a variety of mappable volcanic landforms including two shield volcanoes (Evaki Tholus and Toci Tholus) and the southern portion of a large flow field (Neago Fluctus). A total of sixteen units associated with volcanoes have been mapped in this quadrangle, with multiple units mapped at Sif Mons, Sachs Patera and Neago Fluctus. An oddly textured, radarbright flow is also mapped in the Sedna plains, which appears to have originated from a several hundred kilometer long fissure. The six coronae within V-19 have a total of eighteen associated flow units. Several edifice fields are also mapped, in which the small volcanic edifices both predate and postdate the other units. Impact crater materials are also mapped.

Martin, Paula↗
NASA NTRS2009

Geologic Mapping of V-19

A geologic map of the Sedna Planitia (V-19) quadrangle is being completed at the 1:5,000,000 scale as part of the NASA Planetary Geologic Mapping Program, and will be submitted for review by September 2009.

Martin, P.↗
NASA NTRS2008

Geologic Mapping of V-19, V-28, and V-53

The Sedna Planitia Quadrangle (V-19) extend from 25 deg N - 50 deg N latitude, 330 deg - 0 deg longitude. The quadrangle contains the northern-most portion of western Eistla Regio and the Sedna Planitia lowlands. Geologic maps of Sedna Planitia (V-199), Hecate Chasma (V-28) quadrangles have been completed at the 1:5,000,000 scale as part of the NASA Planetary Geologic Mapping Program. All quadrangles (V-53, V-28 and V-19) have been reviewed at lease once and will be resubmitted. In V-28 and V-53, more plains materials units have been mapped than in previously mapped quadrangles V-46 and V-39. V-19 is more comparable to these latter maps in terms of numbers of plains units. In V-28, all of the plains materials units to the south of the rift have an unusually high concentration of volcanic edifices, which both predate and postdate the units. A similar situation is seen in V-53 and V-19, where small edifice formation is not confined to any specific time period. In the two chasma-related quadrangles, coronae are located along the rift, as well as to the north and the south of the rifts. Coronae in both quadrangles exhibit all forms of corona topographic shapes, including depressions, rimmed depressions, plateaus and domes. In V-28 and V-53, some coronae along the rift do not have much associated volcanism; coronae with the most volcanism in these quadrangles are located at least 500 km off the rifts or on the Themis Regio highland. All three quadrangles have very horizontal stratigraphic columns, as limited contact between units prevents clear age determinations. While this results in the appearance that all units formed at the same time, the use of hachured columns for each unit illustrates the limited nature of our stratigraphic knowledge in these quadrangles, allowing for numerous possible geologic histories. The scale of resurfacing in these quadrangles is on the scale of 100s of kilometers, consistent with the fact that they lie in the most volcanic region of Venus.

Stofan, E. R.↗
NASA NTRS2000

Geology of the V28 Quadrangle: Hecate Chasma, Venus

The Hecate Chasma Quadrangle (V28), mapped at 1:5,000,000 scale, extends from 0-25 N and 240-270 Longitude. The quadrangle has thirteen impact craters, several large volcanoes, many coronae, three chasmata, and northern Hinemoa Planitia.

Stofan, E. R.↗
NASA NTRS1998

New Insights into Coronae Evolution: Mapping on Venus

Coronae are geologically and geophysically important features on Venus, since they are thought to contribute to planetary heat loss. It is thus necessary to understand their role in space and time in the evolution of Venus. We show that the formation of corona annuli can be multistaged and that the position of the annulus does not always coincide with the main topographic ridges and troughs that outline the feature. We demonstrate that coronae do not all have the same relative ages with respect to adjacent units.

coronae↗
NASA NTRS1995

Emplacement of Xenolith Nodules in the Kaupulehu Lava Flow, Hualalai Volcano, Hawaii

The basaltic Kaupulehu 1800-1801 lava flow of Hualalai Volcano, Hawaii contains abundant ultramafic xenoliths. Many of these xenoliths occur as bedded layers of semi-rounded nodules, each thinly coated with a veneer (typically 1 mm thick) of lava. The nodule beds are analogous to cobble deposits of fluvial sedimentary systems. Although several mechanisms have been proposed for the formation of the nodule beds, it was found that, at more than one locality, the nodule beds are overbank levee deposits. The geological occurrence of the nodules, certain diagnostic aspects of the flow morphology and consideration of the inferred emplacement process indicate that the Kaupulehu flow had an exceptionally low viscosity on eruption and that the flow of the lava stream was extremely rapid, with flow velocities of at least 10 m/s (more than 40 km/h. This flow is the youngest on Hualalai Volcano and future eruptions of a similar type would pose considerable hazard to life as well as property.

Guest, J. E.↗
NASA NTRS1993

Scalloped margin domes: What are the processes responsible and how do they operate?

Studies of scalloped margin domes (SMD) indicate the scallops are the result of slope failure. SMD's have similar but smaller average diameters (26.5 km) to unmodified domes (29.8 km), and the majority plot at altitudes ranging from 0.5-4.7 km, relative to the mean planetary diameter. A range of morphological types exist from those least modified to those that show heavy modification. Of the 200 SMD's examined, 33 have clearly discernible debris aprons. Examination and comparison of debris aprons with mass movement features on the Moon, Mars, and in sub-aerial and submarine environments on Earth using H/L against area (km(sup 2)), suggests there are three main types of failure; debris avalanche, slumps, and debris flow. The five examples representing the morphological range within the SMD's, show the different modified forms and the different types of slope failures that have occurred.

Bulmer, M. H.↗
NASA NTRS1993

The origin of Venusian channels: Modelling of thermal erosion by lava

Magellan imagery has revealed that channels, apparently volcanic in origin, are abundant on the surface of Venus. There has been much debate about the origin of these channels. Are they the result of erosional (either thermal or mechanical) or constructional processes? A common characteristic of the simple sinuous channels is that they show evidence of erosion near their source and then become purely constructional, forming levees and in some cases roofing over completely. One method of showing that thermal erosion is capable of producing the type of channels seen is to use computer modeling incorporating the physical conditions on Venus and the physical characteristics of the different types of lava that may have been erupted. It is possible to calculate, relatively easily, two channel parameters. The first is the erosion rate, which combined with eruption duration, gives depth. The second is for how long after leaving the source the erupted lava will continue to be capable of thermal erosion before constructional processes dominate. Making assumptions about the rheology of the lava (e.g., assume it behaves as a Bingham plastic) along with the slope angle yields a flow velocity and therefore a distance over which thermal erosion will take place. Due to the resolution (both vertical and horizontal) of the Magellan altimetric data, the distance from the source that the channel is erosional can be much more accurately measured than the depth of the channel. This will remain the case until stereo imagery becomes available for large areas of the planet.

Bussey, D. B. J.↗
NASA NTRS1993

Sheet flow fields on Venus

A survey of flow fields with areas greater than 50,000 sq km revealed fields with sheet-like morphology. These sheet flow fields are distinguished by their relatively uniform backscatter, lack of internal flow structure such as well defined lava streams or channels, absence of flow lobes, and irregular boundaries. Internal flow boundaries are essentially absent in these fields, and as such they cannot usually be divided into separate stratigraphic units or eruptive episodes. This is unlike other flow fields with more digitate morphologies, which are made up of discrete flow lobes, and can usually be divided into several episodes of flow emplacement. Five sheet flow fields were studied so far, and other candidates were found. A flow field associated with Lauma Dorsa is taken as an example and examined in detail.

Lancaster, M. G.↗
NASA NTRS1992

Debris avalanches and slumps on the margins of volcanic domes on Venus: Characteristics of deposits

Modified volcanic domes, referred to as collapsed margin domes, have diameters greater than those of terrestrial domes and were therefore thought to have no suitable terrestrial analogue. Comparison of the collapsed debris using the Magellan SAR images with volcanic debris avalanches on Earth has revealed morphological similarities. Some volcanic features identified on the seafloor from sonar images have diameters similar to those on Venus and also display scalloped margins, indicating modification by collapse. Examination of the SAR images of collapsed dome features reveals a number of distinct morphologies to the collapsed masses. Ten examples of collapsed margin domes displaying a range of differing morphologies and collapsed masses have been selected and examined.

Bulmer, M. H.↗
NASA NTRS1992

Erosion versus construction: The origin of Venusian channels

Lava channels are a common feature in the volcanic regions of the Moon, and have now been observed on Venus. There has been much debate about the origin of lunar channels as to whether they are the result of erosional (either thermal or mechanical) or constructional processes. It is necessary to determine the criteria to distinguish between the different types of channels. The clearest evidence is that the presence of levees indicates that the channel experienced a constructional phase for a period. One example of a channel of this type in the southeast region of Aphrodite Terra appears to show both erosional and constructional characteristics. It is approximately 700 km long with an average width of about 1 km. It drops a distance of 700 m from beginning to end, which means that the average slope is 0.06 degrees. Its source may have been a graben situated at the northwest end of the channel. It appears to have different origins along its length. The lack of levees near the source suggests that the channel is erosional in this region. The presence of levees indicates that a constructional phase has occurred. These are formed by lava repeatedly splashing over the channel sides and solidifying. Evidence of levees is seen further away from the source. However, the presence of levees does not mean that the lava was not also eroding and deepening the channel. Thus, in conclusion, our example channel is very sinuous and there is evidence of erosion. There may also have been overflow here. In its middle reaches it roofs over and has the characteristics of a lava tube. In the lower reaches there is strong evidence for the presence of levees indicating construction. On Earth, limited amounts of erosion may occur in basaltic lava channels, although not nearly on the same scale as on the planets just mentioned. For lava erosion on Earth to occur to a comparable extent, excessive eruption times are required. However, low-viscosity komatiite lava may erode to a larger extent and there is direct evidence that carbonatite lava erodes when the underlying strata is also carbonatite. Previously, it has always been assumed that for thermal erosion to occur the flow must be turbulent. Recent findings indicate that this may be a false assumption and that laminar flow may be effective in eroding the substrate.

Bussey, D. B. J.↗
NASA NTRS1992

Large-volume lava flow fields on Venus: Dimensions and morphology

Of all the volcanic features identified in Magellan images, by far the most extensive and really important are lava flow fields. Neglecting the widespread lava plains themselves, practically every C1-MIDR produced so far contains several or many discrete lava flow fields. These range in size from a few hundred square kilometers in area (like those fields associated with small volcanic edifices for example), through all sizes up to several hundred thousand square kilometers in extent (such as many rift related fields). Most of these are related to small, intermediate, or large-scale volcanic edifices, coronae, arachnoids, calderas, fields of small shields, and rift zones. An initial survey of 40 well-defined flow fields with areas greater than 50,000 sq km (an arbitrary bound) has been undertaken. Following Columbia River Basalt terminology, these have been termed great flow fields. This represents a working set of flow fields, chosen to cover a variety of morphologies, sources, locations, and characteristics. The initial survey is intended to highlight representative flow fields, and does not represent a statistical set. For each flow field, the location, total area, flow length, flow widths, estimated flow thicknesses, estimated volumes, topographic slope, altitude, backscatter, emissivity, morphology, and source has been noted. The flow fields range from about 50,000 sq km to over 2,500,000 sq km in area, with most being several hundred square kilometers in extent. Flow lengths measure between 140 and 2840 km, with the majority of flows being several hundred kilometers long. A few basic morphological types have been identified.

Lancaster, M. G.↗
NASA NTRS1991

Magellan: Preliminary description of Venus surface geologic units

Observations from approximately one-half of the Magellan nominal eight-month mission to map Venus are summarized. Preliminary compilation of initial geologic observations of the planet reveals a surface dominated by plains that are characterized by extensive and intensive volcanism and tectonic deformation. Four broad categories of units have been identified: plains units, linear belts, surficial units, and terrain units.

Saunders, R. S.↗
NASA NTRS1990

Remote sensing of Italian volcanos

The results of a July 1986 remote sensing campaign of Italian volcanoes are reviewed. The equipment and techniques used to acquire the data are described and the results obtained for Campi Flegrei and Mount Etna are reviewed and evaluated for their usefulness for the study of active and recently active volcanoes.

Bianchi, R.↗
NASA NTRS1987

Lava flow-field morphology: A case study from Mount Etna, Sicily

The morphology of lava flows is often taken as an indicator of the broad chemical composition of the lava, especially when interpreting extraterrestrial volcanoes using spacecraft images. The historical lavas of the active volcano Mount Etna in Sicily provide an excellent opportunity to examine the controls on flow field morphology. In this study only flow produced by flank eruptions after the middle of the 18th century are examined. The final form of a flow-field may be more indicative of the internal plumbing of the volcano, which may control such factors as the effusion, rate, duration of eruption, volume of available magma, rate of de-gassing, and lava rheology. Different flow morphologies on Etna appear to be a good indicator of differing conditions within the volcanic pile. Thus the spatial distribution of different flow types on an extraterrestrial volcano may provide useful information about the plumbing conditions of that volcano, rather than necessarily providing information on the composition of materials erupted.

Guest, J. E.↗
NASA NTRS1982

Mars - Stratigraphy and gravimetry of Olympus Mons and its aureole

The relative ages of the major geologic units on and around Olympus Mons are considered, together with an interpretation of the gravity anomaly found for this area. The crater data for this investigation have been acquired and interpreted according to the method outlined by Neukum and Hiller (1981). After careful geological mapping, craters clearly identified as impacts are measured and counted. Crater frequency values per sq km for craters greater than or equal to 1 km ('crater retention ages') are read from the individual counts by fitting the Martian cumulative crater production size-frequency distribution to the individual counts. In addition to age dating, the problem of the origin and nature of the aureole materials using gravity data is addressed. This is done by determining whether the line-of-sight gravity extending from Olympus Mons to the northwestern part of the aureole can be explained by the aureole masses alone or whether additional high-density intrusive masses must be assumed in the aureola area.

Hiller, K. H.↗
NASA NTRS1982

Experimental simulation of impact cratering on icy satellites

Cratering processes on icy satellites were simulated in a series of 102 laboratory impact experiments involving a wide range of target materials. For impacts into homogeneous clay slurries with impact energies ranging from five million to ten billion ergs, target yield strengths ranged from 100 to 38 Pa, and apparent viscosities ranged from 8 to 200 Pa s. Bowl-shaped craters, flat-floored craters, central peak craters with high or little relief, and craters with no relief were observed. Crater diameters increased steadily as energies were raised. A similar sequence was seen for experiment in which impact energy was held constant but target viscosity and strength progressively decreases. The experiments suggest that the physical properties of the target media relative to the gravitationally induced stresses determined the final crater morphology. Crater palimpsests could form by prompt collapse of large central peak craters formed in low target strength materials. Ages estimated from crater size-frequency distributions that include these large craters may give values that are too high.

Greeley, R.↗