Search NASA⌕ Search

Engineering topics

Guha, Supratik

Publications and source records attributed to Guha, Supratik.

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Direct Imaging of Asymmetric Interfaces and Electrostatic Potentials inside a Hafnia–Zirconia Ferroelectric Nanocapacitor

In hafnia-based thin-film ferroelectric devices, chemical phenomena during growth and processing, such as oxygen vacancy formation and interfacial reactions, appear to strongly affect device performance. However, the correlation between the structure, chemistry, and electrical potentials at the nanoscale in these devices is not fully known, making it difficult to understand their influence on device properties. Here, we directly image the composition and electrostatic potential with nanometer resolution in the cross section of a nanocrystalline W/Hf 0.5 Zr 0.5 O 2−δ (HZO)/W ferroelectric capacitor using multimodal electron microscopy. This reveals a 1.4 nm wide tungsten suboxide interfacial layer formed at the bottom interface during fabrication, which introduces a potential dip and leads to asymmetric switching fields. Additionally, we compare the measured potentials to DFT calculations and find it is nearly 3 V lower than expected in the HZO, which appears to be caused by oxygen vacancies and a resulting negative built-in potential. In conclusion, these chemical and electrostatic details are important to characterize and tune to achieve high-performance ferroelectric devices.

Defects in solids↗
DOE OSTI2024

Optical and spin coherence of Er spin qubits in epitaxial cerium dioxide on silicon

Robust spin-photon interfaces with optical transitions in the telecommunication band are essential for quantum networking technologies. Erbium (Er) ions are the ideal candidate with environmentally protected transitions in telecom-C band. Finding the right technologically compatible host material to enable long-lived spins remains a major hurdle. We introduce a new platform based on Er ions in cerium dioxide (CeO 2 ) as a nearly-zero nuclear spin environment (0.04%) epitaxially grown on silicon, offering silicon compatibility for opto-electrical devices. Our studies focus on Er 3+ ions and show a narrow homogeneous linewidth of 440 kHz with an optical coherence time of 0.72 μs at 3.6 K. The reduced nuclear spin noise enables a slow spin-lattice relaxation with a spin relaxation time up to 2.5 ms and an electron spin coherence time of 0.66 μs (in the isolated ion limit) at 3.6 K. These findings highlight the potential of Er 3+ :CeO 2 platform for quantum networks applications.

Zhang, Jiefei↗
DOE OSTI2024

Controlled Spalling of 4H Silicon Carbide with Investigated Spin Coherence for Quantum Engineering Integration

We detail scientific and engineering advances which enable the controlled spalling and layer transfer of single crystal 4H silicon carbide (4H-SiC) from bulk substrates. 4HSiC’s properties, including high thermal conductivity and a wide bandgap, make it an ideal semiconductor for power electronics. Moreover, 4H-SiC is an excellent host of solid-state atomic defect qubits for quantum computing and quantum networking. Because 4H-SiC substrates are expensive (due to long growth times and limited yield), techniques for removal and transfer of bulk-quality films are desirable for substrate reuse and integration of the separated films. In this work, we utilize updated approaches for stressor layer thickness control and spalling crack initiation to demonstrate controlled spalling of 4H-SiC, the highest fracture toughness crystal spalled to date. We achieve coherent spin control of neutral divacancy (VV 0 ) qubit ensembles and measure a quasi-bulk spin T 2 of 79.7 μs in the spalled films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optical and microstructural studies of erbium-doped TiO 2 thin films on silicon, SrTiO 3 , and sapphire

Rare-earth ion doped oxide thin films integrated on silicon substrates provide a route toward scalable, chip-scale platforms for quantum coherent devices. Erbium-doped TiO 2 is an attractive candidate: the Er 3+ optical transition is compatible with C-band optical fiber communications, while TiO 2 is an insulating dielectric compatible with silicon process technology. Through structural and optical studies of Er-doped TiO 2 thin films grown via molecular beam deposition on silicon, SrTiO 3 , and sapphire substrates, we have explored the impact of polycrystallinity and microstructure on the optical properties of the Er emission. Comparing polycrystalline TiO 2 (rutile)/Si with single-crystalline TiO 2 (rutile)/r-sapphire and polycrystalline TiO 2 (anatase)/Si with single-crystalline TiO 2 (anatase)/SrTiO 3 , we observe that the inhomogeneous linewidth (Γ inh ) of the most prominent peak in the Er spectrum (the Y 1 –Z 1 transition, 1520 and 1533 nm in rutile and anatase TiO 2 ) is significantly narrower in the polycrystalline case. This implies a relative insensitivity to extended structural defects and grain boundaries in such films (as opposed to, e.g., point defects). We show that the growth of an undoped, underlying TiO 2 buffer on Si can reduce Γ inh by a factor of 4–5. Expectedly, Γ inh also reduces with decreasing Er concentrations: we observe a ∼2 order of magnitude reduction from ∼1000 ppm Er to ∼10 ppm Er. Γ inh then gets limited to a residual value of ∼5 GHz that is insensitive to further reduction in the Er concentration. Based upon the above results, we argue that the optical properties in these thin films are limited by the presence of high “grown-in” point defect concentrations.

Chemical elements↗
DOE OSTI2024

Isolation of individual Er quantum emitters in anatase TiO 2 on Si photonics

Defects and dopant atoms in solid state materials are a promising platform for realizing single photon sources and quantum memories, which are the basic building blocks of quantum repeaters needed for long distance quantum networks. In particular, trivalent erbium (Er 3+ ) is of interest because it couples C-band telecom optical transitions with a spin-based memory platform. In order to produce quantum repeaters at the scale required for quantum networks it is imperative to integrate these necessary building blocks with mature and scalable semiconductor processes. Here, in this work, we demonstrate the optical isolation of single Er 3+ ions in CMOS-compatible titanium dioxide (TiO 2 ) thin films monolithically integrated on a silicon-on-insulator photonics platform. Our results demonstrate an initial step toward the realization of a monolithically integrated and scalable quantum photonics package based on Er 3+ doped thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Anomalous Purcell decay of strongly driven inhomogeneous emitters coupled to a cavity

We perform resonant fluorescence lifetime measurements on a nanocavity-coupled erbium ensemble as a function of cavity-laser detuning and pump power. Our measurements reveal an anomalous three-fold suppression of the ensemble Purcell factor at zero cavity detuning and high pump fluence. We capture qualitative aspects of this decay rate suppression using a Tavis–Cummings model of non-interacting spins coupled to a common cavity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nanosecond Structural Dynamics during Electrical Melting of Charge Density Waves in 1⁢T-TaS 2

Electrical control of charge density waves has been of immense interest, as the strong underlying electron-lattice interactions potentially open new, efficient pathways for manipulating their ordering and, consequently, their electronic properties. However, the transition mechanisms are often unclear as electric field, current, carrier injection, heat, and strain can all contribute and play varying roles across length scales and timescales. Here, we provide insight on how electrical stimulation melts the room temperature charge density wave order in 1T-TaS 2 by visualizing the atomic and mesoscopic structural dynamics from quasistatic to nanosecond pulsed melting. Using a newly developed ultrafast electron microscope setup with electrical stimulation, we reveal the order and strain dynamics during voltage pulses as short as 20 ns. The order parameter dynamics across a range of pulse amplitudes and durations support a thermally driven mechanism even for fields as high as 19 kV cm -1 . In addition, time-resolved imaging reveals a heterogeneous, mesoscopic strain response across the flake, including MHz-scale acoustic resonances that emerge during sufficiently short pulsed excitation which may modulate the order. In conclusion, these results suggest that metallic charge density wave phases like studied here may be more robust to electronic switching pathways than insulating ones, motivating further investigations at higher fields and currents in this and other related systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optical and microstructural characterization of Er 3+ doped epitaxial cerium oxide on silicon

Rare-earth ion dopants in solid-state hosts are ideal candidates for quantum communication technologies, such as quantum memories, due to the intrinsic spin–photon interface of the rare-earth ion combined with the integration methods available in the solid state. Erbium-doped cerium oxide (Er:CeO 2 ) is a particularly promising host material platform for such a quantum memory, as it combines the telecom-wavelength (~ 1.5 μm) 4f–4f transition of erbium, a predicted long electron spin coherence time when embedded in CeO 2 , and a small lattice mismatch with silicon. In this work, we report on the epitaxial growth of Er:CeO 2 thin films on silicon using molecular beam epitaxy, with controlled erbium concentration between 2 and 130 parts per million (ppm). We carry out a detailed microstructural study to verify the CeO 2 host structure and characterize the spin and optical properties of the embedded Er 3+ ions as a function of doping density. In as-grown Er:CeO 2 in the 2–3 ppm regime, we identify an EPR linewidth of 245(1) MHz, an optical inhomogeneous linewidth of 9.5(2) GHz, an optical excited state lifetime of 3.5(1) ms, and a spectral diffusion-limited homogeneous linewidth as narrow as 4.8(3) MHz. We test the annealing of Er:CeO 2 films up to 900 °C, which yields narrowing of the inhomogeneous linewidth by 20% and extension of the excited state lifetime by 40%.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanofabrication and Demonstration of a Direct-Write Microevaporator

Direct-write vapor deposition is a new technique that would enable one-step 3D maskless nanofabrication on a variety of substrates. A novel silicon chip-based microevaporator is developed that allows evaporant to exit through 2000–300 nm nozzles while held at distances comparable to the nozzle diameter from the substrate by a three-axis nanopositioning stage in vacuum. This results in a localized deposition on the substrate, which may be scanned relative to the substrate to produce direct-write patterns. The performance of the microevaporator is tested by creating localized depositions of various materials and the line-writing potential is demonstrated. The relationship between linewidth and source-to-substrate distance is investigated by the application of Knudsen's cosine law and Monte-Carlo simulations, and then utilized to approximate the source-to-substrate distance from performed depositions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quasi-deterministic localization of Er emitters in thin film TiO 2 through submicron-scale crystalline phase control

With their shielded 4f orbitals, rare-earth ions (REIs) offer optical and electron spin transitions with good coherence properties even when embedded in a host crystal matrix, highlighting their utility as promising quantum emitters and memories for quantum information processing. Among REIs, trivalent erbium (Er 3+ ) uniquely has an optical transition in the telecom C-band, ideal for transmission over optical fibers, making it well suited for applications in quantum communication. The deployment of Er 3+ emitters into a thin film TiO 2 platform has been a promising step toward scalable integration; however, like many solid-state systems, the deterministic spatial placement of quantum emitters remains an open challenge. Here, we investigate laser annealing as a means to locally tune the optical resonance of Er 3+ emitters in TiO 2 thin films on Si. Using both nanoscale x-ray diffraction measurements and cryogenic photoluminescence spectroscopy, we show that tightly focused below-gap laser annealing can induce anatase to rutile phase transitions in a nearly diffraction-limited area of the films and improve local crystallinity through grain growth. As a percentage of Er:TiO 2 is converted to rutile, the Er 3+ optical transition blueshifts by 13 nm. We explore the effects of changing laser annealing time and show that the amount of optically active Er:rutile increases linearly with laser power. We additionally demonstrate local phase conversion on microfabricated Si structures, which holds significance for quantum photonics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Low refractive index surface layers and related methods

The disclosure relates to a method for forming a low refractive index layer on a substrate. The method generally includes (a) applying a block copolymer layer on a substrate, the block copolymer including a polar polymeric block and a non-polar polymeric block; (b) swelling the block copolymer layer with a solvent to increase the block copolymer layer thickness; (c) depositing a metal oxide or metalloid oxide layer on polar polymeric blocks of the block copolymer layer; and (d) removing the block copolymer layer from the substrate, thereby forming a porous metal oxide or metalloid oxide layer on the substrate.

Shevchenko, Elena↗
DOE OSTI2023

The Dynamics of Oxygen Ion Exchange in Epitaxial Strontium Cobaltite Bilayers

Abstract The exchange of ions across interfaces is key to the field of iontronics, where the properties of the device can be altered by the local ion concentration. This study investigates a complex oxide system where structural and electronic phase transitions can be driven by changes in the concentration of oxygen ions. In situ coherent X‐ray studies are conducted on epitaxial bilayers of insulating SrCoO 2.5 and metallic SrCoO 3 − δ . The diffusion of oxygen ions across the bilayer is studied with X‐ray photon correlation spectroscopy to capture the dynamical behavior of the interface in reducing and oxidizing environments. The behavior is strongly asymmetric, with much slower dynamics appearing in reducing versus oxidizing environments. According to the correlation functions determined from different points in reciprocal space, this study finds that the dynamics near the center of the SrCoO 2.5 crystal are generally similar to those near the heterointerfaces. The results suggest that the interface is stable and reversible, making SrCoO x a model system for the study of iontronic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Resonator-based ion-selective sensor

The present disclosure relates to systems and methods suitable to measure trace amounts of specific ions in fluid samples. An example system includes a resonator having an input coupler and an output coupler. The example system also includes an ion-selective membrane (ISM) optically coupled to at least a portion of the resonator. The system additionally includes a light source configured to illuminate the resonator by way of the input coupler. Furthermore, the system includes a detector configured to receive output light by way of the output coupler and provide information indicative a concentration of a specific ion proximate to tire ISM.

Zhang, Xufeng↗
DOE OSTI2023

Compute in‐Memory with Non‐Volatile Elements for Neural Networks: A Review from a Co‐Design Perspective

Abstract Deep learning has become ubiquitous, touching daily lives across the globe. Today, traditional computer architectures are stressed to their limits in efficiently executing the growing complexity of data and models. Compute‐in‐memory (CIM) can potentially play an important role in developing efficient hardware solutions that reduce data movement from compute‐unit to memory, known as the von Neumann bottleneck. At its heart is a cross‐bar architecture with nodal non‐volatile‐memory elements that performs an analog multiply‐and‐accumulate operation, enabling the matrix‐vector‐multiplications repeatedly used in all neural network workloads. The memory materials can significantly influence final system‐level characteristics and chip performance, including speed, power, and classification accuracy. With an over‐arching co‐design viewpoint, this review assesses the use of cross‐bar based CIM for neural networks, connecting the material properties and the associated design constraints and demands to application, architecture, and performance. Both digital and analog memory are considered, assessing the status for training and inference, and providing metrics for the collective set of properties non‐volatile memory materials will need to demonstrate for a successful CIM technology.

36 MATERIALS SCIENCE↗