Search NASA⌕ Search

Engineering topics

Guo, Hua

Publications and source records attributed to Guo, Hua.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Inelastic Triatom-Atom Quantum Close-Coupling Dynamics in Full Dimensionality: All Rovibrational Mode Quenching of Water Due to the H Impact on a Six-Dimensional Potential Energy Surface

The rovibrational level populations, and subsequent emission in various astrophysical environments, are driven by inelastic collision processes. The available rovibrational rate coefficients for water have been calculated using a number of approximations. We present a numerically exact calculation for the rovibrational quenching for all water vibrational modes due to collisions with atomic hydrogen. The scattering theory implements a quantum close-coupling (CC) method on a high level ab initio six-dimensional (6D) potential energy surface (PES). Total rovibrational quenching cross sections for excited bending levels were compared with earlier results on a 4D PES with the rigid-bender closecoupling (RBCC) approximation. General agreement between 6D-CC and 4DRBCC calculations are found, but differences are evident including the energy and amplitude of low-energy orbiting resonances. Quenching cross sections from the symmetric and asymmetric stretch modes are provided for the first time. The current 6D-CC calculation provides accurate inelastic data needed for astrophysical modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Acid Etching‐Driven Self‐Assembly of Mn‐Shell Inducing Rock‐Salt Phase for Enhanced Single‐Crystal Ni‐Rich Cathodes

With the wide adoption of Li‐ion batteries, Ni‐rich cathode is considered as one of the most promising candidates of cathodes due to its high energy density and low cost. However, stability decreased with increasing Ni content in the Ni‐rich cathode. To solve this bottleneck, many strategies, such as coating, doping, surface modification, and special morphologies, have been developed. Herein, we introduce a groundbreaking approach for enhancing Ni‐rich cathode through an innovative acid etching process that promotes Mn shell self‐assembly, inducing a rock‐salt phase on the surface. This method not only simplifies the Ni‐rich cathode modification process, but also significantly improves the structural stability and electrochemical performance of Ni‐rich cathode. Our findings demonstrate that developed single‐crystal Ni‐rich cathode shows 3–34 % better stability compared to both commercial modified Ni‐rich cathode and unmodified counterparts. The unique Mn shell effectively mitigates reversible phase shifts during cycling, contributing to a remarkable enhancement in cycling stability. Additionally, this novel fabrication technique paves the way for cost‐effective production of high‐performance cathode materials, offering substantial benefits for lithium‐ion battery technology. And this study proves the potential of this method in advancing the design and development of durable, high‐capacity cathode materials for next‐generation batteries.

Ni-rich cathode↗
DOE OSTI2024

Full‐dimensional coupled‐channel statistical approach to atom‐triatom systems and applications to H/D + O 3 reaction

Abstract The statistical quantum model (SQM), which assumes that the reactivity is controlled by entrance/exit channel quantum capture probabilities, is well suited for chemical reactions with a long‐lived intermediate complex. In this work, a time‐independent coupled‐channel implementation of the SQM approach is developed for atom‐triatom systems in full dimensionality. As SQM treats the capture dynamics quantum mechanically, it is capable of handling quantum effects such as tunneling. A detailed study of the H/D + O 3 capture dynamics was performed by applying the newly developed SQM method on an accurate global potential energy surface. Agreement with previous ring polymer molecular dynamics (RPMD) results on the same potential energy surface is excellent except for very low temperatures. The SQM results are also in reasonably good agreement with available experimental rate coefficients. The strong H/D kinetic isotope effect underscores the dominant role of quantum tunneling under an entrance channel barrier at low temperatures.

Yang, Dongzheng↗
DOE OSTI2024

In Situ and Operando Observation of Zinc Moss Growth and Dissolution in Alkaline Electrolyte for Zinc–Air Batteries

As a promising battery technology, zinc–air batteries still face significant challenges, including the formation of a mossy structure on the zinc metal anode in alkaline electrolyte. Because a similar phenomenon also plagues lithium and sodium metal batteries, elucidating its mechanism has important implications for progress in energy storage. Herein, operando X-ray nanotomography was employed to visualize zinc moss growth and dissolution at the individual colony level. By tracking its microstructure evolution, zinc moss was found to display irreversible plating/stripping behavior. While zinc moss exhibits self-limiting growth and zinc deposition occurs mainly in its outer region, zinc dissolution is more uniformly distributed inside the moss colony upon stripping, leading to the formation of “dead” zinc and capacity loss. A direct correlation is established between the moss amount and zinc plating/stripping efficiency. Finally, results from this study offer new insights into mitigating the unstable zinc plating morphology and improving the cycle life of aqueous zinc–air batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

State-to-State Molecular Reactions in the Ultracold Regime (Final Scientific Report)

We have achieved the proposed goal to experimentally probe the AB + CD and AB + C types of reactions with state-to-state resolution, which we also compared to advanced theoretical calculations to help elucidate the role of quantum mechanics in the processes of bond breakage and formation. Our approach uses reactants that are prepared at ultracold temperatures (< 1µK) such that the quantum effects of translational motion are an important factor. Specific example reactions, including the potassium-rubidium metathesis reaction KRb + KRb → K 2 + Rb 2 as well as the atom exchange reaction Rb + KRb → Rb2 + K, are chosen because the technology of quantum internal and motional state control of these types of molecules is particularly advanced. The results for the entire funding period are fruitful. For the majority of this grant, we have constructed a one-of-the-kind quantum degenerate gas apparatus that integrates ion detection and velocity map imaging capabilities, allowing us to explore the KRb + KRb → K 2 + Rb 2 bimolecular reaction in detail. Specifically, we first verified such a reaction indeed proceed at ultracold temperatures by direct detection of reaction products. We then mapped out the complete product state distribution, which was compared to a state-counting model based on statistical theory. Our results show an overall agreement with the statistical state counting model, but also reveal several deviating state-pairs. An exact quantum calculation for molecule-molecule collisions, that is needed to understand these deviations, is however beyond the current state-of-the-art. Beside scrutinizing the reaction products, we also directly observe the reaction intermediate complex, which was quite a surprise to us. The intermediate complexes are long-lived and can interact with the inferred light that we use to trap the ultracold gas. After molecule-molecule collisions, we then explored the more theoretically tractable Rb + KRb reaction, which is endothermic. Surprisingly, we observed an exceedingly long-lived KRb$^*_2$ collisional complexes, with our experimentally measured complex lifetime deviating from conventional theoretical calculations by five orders of magnitude. This discrepancy has motivated many explorations of possible underlying causes, though no model yet captures this phenomenon completely. In the final year and the work that continues today, we extend upon these atom-molecule collision experiments to explore the origin of the long-lived KRb$^*_2$ complex lifetime and develop means to control the outcome of the reaction complex. The 5-year funded work advanced our understanding of chemical reactions at the lowest possible temperatures and at the same time opened up many new questions that are beyond our initial imaginations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing the dynamics and bottleneck of the key atmospheric SO 2 oxidation reaction by the hydroxyl radical

SO 2 (Sulfur dioxide) is the major precursor to the production of sulfuric acid (H 2 SO 4 ), contributing to acid rain and atmospheric aerosols. Sulfuric acid formed from SO 2 generates light-reflecting sulfate aerosol particles in the atmosphere. This property has prompted recent geoengineering proposals to inject sulfuric acid or its precursors into the Earth’s atmosphere to increase the planetary albedo to counteract global warming. SO 2 oxidation in the atmosphere by the hydroxyl radical HO to form HOSO 2 is a key rate-limiting step in the mechanism for forming acid rain. However, the dynamics of the HO + SO 2 → HOSO 2 reaction and its slow rate in the atmosphere are poorly understood to date. Herein, we use photoelectron spectroscopy of cryogenically cooled HOSO 2 – anion to access the neutral HOSO 2 radical near the transition state of the HO + SO 2 reaction. Spectroscopic and dynamic calculations are conducted on the first ab initio-based full-dimensional potential energy surface to interpret the photoelectron spectra of HOSO 2 – and to probe the dynamics of the HO + SO 2 reaction. In addition to the finding of a unique pre-reaction complex (HO⋯SO 2 ) directly connected to the transition state, dynamic calculations reveal that the accessible phase space for the HO + SO 2 → HOSO 2 reaction is extremely narrow, forming a key reaction bottleneck and slowing the reaction rate in the atmosphere, despite the low reaction barrier. This study underlines the importance of understanding the full multidimensional potential energy surface to elucidate the dynamics of complex bimolecular reactions involving polyatomic reactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Low-temperature grapho-epitaxial La-substituted BiFeO 3 on metallic perovskite

Bismuth ferrite has garnered considerable attention as a promising candidate for magnetoelectric spin-orbit coupled logic-in-memory. As model systems, epitaxial BiFeO 3 thin films have typically been deposited at relatively high temperatures (650–800 °C), higher than allowed for direct integration with silicon-CMOS platforms. Here, we circumvent this problem by growing lanthanum-substituted BiFeO 3 at 450 °C (which is reasonably compatible with silicon-CMOS integration) on epitaxial BaPb 0.75 Bi 0.25 O 3 electrodes. Notwithstanding the large lattice mismatch between the La-BiFeO 3 , BaPb 0.75 Bi 0.25 O 3 , and SrTiO 3 (001) substrates, all the layers in the heterostructures are well ordered with a [001] texture. Polarization mapping using atomic resolution STEM imaging and vector mapping established the short-range polarization ordering in the low temperature grown La-BiFeO 3 . Current-voltage, pulsed-switching, fatigue, and retention measurements follow the characteristic behavior of high-temperature grown La-BiFeO 3 , where SrRuO 3 typically serves as the metallic electrode. These results provide a possible route for realizing epitaxial multiferroics on complex-oxide buffer layers at low temperatures and opens the door for potential silicon-CMOS integration.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dynamics of collision-induced energy transfer

Collisions are of fundamental importance in many relevant physico-chemical phenomena in the gas phase and at the gas-surface interface. Collision-induced energy transfer not only offers a sensitive probe of interatomic interactions, but also impacts an array of processes ranging from transport to reactivity. This perspective highlights some recent advances on collision-induced energy transfer dynamics. In the gas phase, cold collisions revealed remarkable quantum effects and stereodynamics of bimolecular inelastic scattering, which motivated development of new state-to-state quantum scattering methods. For surface processes, experiments of hydrogen atom scattering from various surfaces combined with first-principles molecular dynamics simulations shed valuable light on the relative importance of adiabatic energy transfer to surface phonons and nonadiabatic energy transfer to surface electrons. We outline further challenges in these fields and expect more fruitful interplay between experiment and theory.

Cold collision↗
DOE OSTI2023

Regulating Anionic Redox via Mg Substitution in Mn-Rich Layered Oxide Cathodes Enabling High Electrochemical Stability for Sodium-Ion Batteries

Here, with the limited resources and high cost of lithium-ion batteries (LIBs) and the ever-increasing market demands, sodium-ion batteries (SIBs) gain much interest due to their economical sustainability, and similar chemistry and manufacturing processes to LIBs. As cathodes play a vital role in determining the energy density of SIBs, Mn-based layered oxides are promising cathodes due to their low cost, environmental friendliness, and high theoretical capacity. However, the main challenge is structural instability upon cycling at high voltage. Herein, Mg is introduced into the P2-type Na 0.62 Ni 0.25 Mn 0.75 O 2 cathode to enhance electrochemical stability. By combining electrochemical testing and material characterizations, it is found that substituting 10 mol% Mg can effectively alleviate the P2–O2 phase transition, Jahn-Teller distortion, and irreversible oxygen redox. Moreover, structural integrity is greatly improved. These lead to enhanced electrochemical performances. With the optimized sample, a remarkable capacity retention of 92% in the half cell after 100 cycles and 95% in the full cell after 170 cycles can be achieved. Altogether, this work provides an alternative way to stabilize P2-type Mn-based layer oxide cathodes, which in turn, put forward the development of this material for the next-generation SIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Enhancing reactivity of SiO + ions by controlled excitation to extreme rotational states

Optical pumping of molecules provides unique opportunities for control of chemical reactions at a wide range of rotational energies. This work reports a chemical reaction with extreme rotational excitation of a reactant and its kinetic characterization. We investigate the chemical reactivity for the hydrogen abstraction reaction SiO + + H 2 → SiOH + + H in an ion trap. The SiO + cations are prepared in a narrow rotational state distribution, including super-rotor states with rotational quantum number ( j ) as high as 170, using a broad-band optical pumping method. We show that the super-rotor states of SiO + substantially enhance the reaction rate, a trend reproduced by complementary theoretical studies. We reveal the mechanism for the rotational enhancement of the reactivity to be a strong coupling of the SiO + rotational mode with the reaction coordinate at the transition state on the dominant dynamical pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Taming Metal–Solid Electrolyte Interface Instability via Metal Strain Hardening

Abstract Solid-state lithium metal batteries have emerged as a promising technology for electric vehicles due to their high specific energy and safety potential. Obtaining intimate contact between Li and electrolyte during cell fabrication, however, remains challenging. Adequate fabrication pressure is required to promote close contact, but this pressure can cause Li deformation and penetration into the electrolyte, resulting in poor battery performance. Here, a strategy for addressing this problem is presented by incorporating 3 at% Mg into Li. Unlike pure Li which obeys the Voce hardening law and allows unconstrained deformation, Li–Mg alloy follows the Swift hardening law and strengthens with strain under compression stress. Because of the constrained deformation of Li–Mg, intimate contact with solid electrolytes is possible even at high fabrication pressure (50–65 MPa), resulting in high critical current densities. These findings underscore the importance of understanding Li metal deformation properties to improve solid-state battery performance.

25 ENERGY STORAGE↗
DOE OSTI2023

Informing air–carbon ablation modeling with theoretical calculations of atomic oxygen and nitrogen interacting with carbon surfaces

To understand the gas–surface chemistry above the thermal protection system of a hypersonic vehicle, it is necessary to map out the kinetics of key elementary reaction steps. In this work, extensive periodic density functional theory (DFT) calculations are performed to elucidate the interaction of atomic oxygen and nitrogen with both the basal plane and edge sites of highly oriented pyrolytic graphite (HOPG). Reaction energies and barriers are determined for adsorption, desorption, diffusion, recombination, and several reactions. These DFT results are compared with the most recent finite-rate model for air–carbon ablation. Our DFT results corroborated some of the parameters used in the model but suggest that further refinement may be necessary for others. The calculations reported here will help to establish a predictive kinetic model for the complex reaction network present under hypersonic flight conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Li + CaF → Ca + LiF chemical reaction under cold conditions

The calcium monofluoride (CaF) molecule has emerged as a promising candidate for precision measurements, quantum simulation, and ultracold chemistry experiments. Inelastic and reactive collisions of laser cooled CaF molecules in optical tweezers have recently been reported and collisions of cold Li atoms with CaF are of current experimental interest. In this paper, we report ab initio electronic structure and full-dimensional quantum dynamical calculations of the Li + CaF → LiF + Ca chemical reaction. The electronic structure calculations are performed using the internally contracted multi-reference configuration-interaction method with Davidson correction (MRCI + Q). An analytic fit of the interaction energies is obtained using a many-body expansion method. Furthermore, a coupled-channel quantum reactive scattering approach implemented in hyperspherical coordinates is adopted for the scattering calculations under cold conditions. Results show that the Li + CaF reaction populates several low-lying vibrational levels and many rotational levels of the product LiF molecule and that the reaction is inefficient in the 1–100 mK regime allowing sympathetic cooling of CaF by collisions with cold Li atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the Chemomechanical Function of the Silver–Carbon Interlayer in Sheet-type All-Solid-State Lithium–Metal Batteries

All-solid-state batteries with lithium metal anodes hold great potential for high-energy battery applications. However, forming and maintaining stable solid–solid contact between the lithium anode and solid electrolyte remains a major challenge. One promising solution is the use of a silver–carbon (Ag–C) interlayer, but its chemomechanical properties and impact on interface stabilities need to be comprehensively explored. Here, we examine the function of Ag–C interlayers in addressing interfacial challenges using various cell configurations. Experiments show that the interlayer improves interfacial mechanical contact, leading to a uniform current distribution and suppressing lithium dendrite growth. Furthermore, the interlayer regulates lithium deposition in the presence of Ag particles via improved Li diffusivity. The sheet-type cells with the interlayer achieve a high energy density of 514.3 Wh L –1 and an average Coulombic efficiency of 99.97% over 500 cycles. Furthermore, this work provides insights into the benefits of using Ag–C interlayers for enhancing the performance of all-solid-state batteries.

25 ENERGY STORAGE↗