Engineering topics
Guo, Hua
Publications and source records attributed to Guo, Hua.
Precision test of statistical dynamics with state-to-state ultracold chemistry
Chemical reactions represent a class of quantum problems that challenge both the current theoretical understanding and computational capabilities1. Reactions that occur at ultralow temperatures provide an ideal testing ground for quantum chemistry and scattering theories, because they can be experimentally studied with unprecedented control, yet display dynamics that are highly complex. Here we report the full product state distribution for the reaction 2KRb → K 2 + Rb 2 . Ultracold preparation of the reactants allows us complete control over their initial quantum degrees of freedom, whereas state-resolved, coincident detection of both products enables the probability of scattering into each of the 57 allowed rotational state-pairs to be measured. Our results show an overall agreement with a state-counting model based on statistical theory, but also reveal several deviating state-pairs. In particular, we observe a strong suppression of population in the state-pair closest to the exoergicity limit as a result of the long-range potential inhibiting the escape of products. Finally, the completeness of our measurements provides a benchmark for quantum dynamics calculations beyond the current state of the art.
Current Status and Future Directions of All-Solid-State Batteries with Lithium Metal Anodes, Sulfide Electrolytes, and Layered Ternary Oxide Cathodes
All-solid-state batteries (ASSBs) offer great promise as a next-generation energy storage technology with higher energy density, wider operating temperature range, and improved safety for electric vehicles. ASSBs employing lithium metal anodes (Li), sulfide-based solid-state electrolytes (SSE), and Ni-rich layered transition metal oxide cathodes (LiMO 2 , M = Ni, Mn, Co, Al) are particularly promising due to its superior electrochemical performance compared to other solid-electrolyte systems. However, the battery cycle life at high cathode mass loading and high current is still limited because the failure mechanism is not fully understood. Lithium dendrite growth at the anode or inside a solid electrolyte still represents as a serious risk of cell failure. Interfacial resistance increases attributed to electrolyte decomposition and interfacial void formation at both cathode–electrolyte and anode–electrolyte interfaces lead to gradual capacity fading. In this Review, we present the fundamental challenges and recent scientific understandings of each component in ASSBs. The novel diagnostic tools for these components, especially the interfaces buried under the surface that are often hard for characterization are mainly examined. Lastly, we offer a perspective for future research directions. We hope this Review will provide a timely snapshot of state-of-the-art research progress in ASSBs to accelerate the development of ASSBs.
Quantitative in-situ study of strength-governed interfacial failure between h-BN and polymer-derived ceramic
Not provided.
Enabling complete multichannel nonadiabatic dynamics: A global representation of the two-channel coupled, 1,2 1 A and 1 3 A states of NH 3 using neural networks
Global coupled three-state two-channel potential energy and property/interaction (dipole and spin–orbit coupling) surfaces for the dissociation of NH 3 (Ã) into NH + H 2 and NH 2 + H are reported. The permutational invariant polynomial-neural network approach is used to simultaneously fit and diabatize the electronic Hamiltonian by fitting the energies, energy gradients, and derivative couplings of the two coupled lowest-lying singlet states as well as fitting the energy and energy gradients of the lowest-lying triplet state. The key issue in fitting property matrix elements in the diabatic basis is that the diabatic surfaces must be smooth, that is, the diabatization must remove spikes in the original adiabatic property surfaces attributable to the switch of electronic wavefunctions at the conical intersection seam. Here, we employ the fit potential energy matrix to transform properties in the adiabatic representation to a quasi-diabatic representation and remove the discontinuity near the conical intersection seam. The property matrix elements can then be fit with smooth neural network functions. The coupled potential energy surfaces along with the dipole and spin–orbit coupling surfaces will enable more accurate and complete treatment of optical transitions, as well as nonadiabatic internal conversion and intersystem crossing.
Visualizing the double-gyroid twin
Explore the source record for details and available documents.
Potential energy surfaces for high-energy N + O 2 collisions
Potential energy surfaces for high-energy collisions between an oxygen molecule and a nitrogen atom are useful for modeling chemical dynamics in shock waves. In the present work, we present doublet, quartet, and sextet potential energy surfaces that are suitable for studying collisions of O 2 ( 3 Σ$^{–}_{g}$) with N( 4 S) in the electronically adiabatic approximation. Two sets of surfaces are developed, one using neural networks (NNs) with permutationally invariant polynomials (PIPs) and one with the least-squares many-body (MB) method, where a two-body part is an accurate diatomic potential and the three-body part is expressed with connected PIPs in mixed-exponential-Gaussian bond order variables (MEGs). We find, using the same dataset for both fits, that the fitting performance of the PIP-NN method is significantly better than that of the MB-PIP-MEG method, even though the MB-PIP-MEG fit uses a higher-order PIP than those used in previous MB-PIP-MEG fits of related systems (such as N 4 and N 2 O 2 ). However, the evaluation of the PIP-NN fit in trajectory calculations requires about 5 times more computer time than is required for the MB-PIP-MEG fit.
Millisecond Conversion of Metastable 2D Materials by Flash Joule Heating
Controllable phase engineering is vital for precisely tailoring material properties since different phase structures have various electronic states and atomic arrangements. Rapid synthesis of thermodynamically metastable materials, especially two-dimensional metastable materials, with high efficiency and low cost remains a large challenge. Here we report flash Joule heating (FJH) as an electrothermal method to achieve the bulk conversion of transition metal dichalcogenides, MoS 2 and WS 2 , from 2H phases to 1T phases in milliseconds. The conversions can reach up to 76% of flash MoS 2 using tungsten powder as conductive additive. Different degrees of phase conversion can be realized by controlling the FJH conditions, such as reaction duration and additives, which allows the study of ratio-dependent properties. First-principles calculations confirm that structural processes associated with the FJH, such as vacancy formation and charge accumulation, result in stabilization of the 1T phases. Furthermore, FJH offers rapid access to bulk quantities of the hitherto hard-to-access 1T phases, a promising method for further fundamental research and diverse applications of metastable phases.
Theoretical H + O 3 rate coefficients from ring polymer molecular dynamics on an accurate global potential energy surface: assessing experimental uncertainties
Thermal rate coefficients and kinetic isotope effects have been calculated for an important atmospheric reaction H/D + O 3 → OH/OD + O2 based on an accurate permutation invariant polynomial-neural network potential energy surface, using ring polymer molecular dynamics (RPMD), quasi-classical trajectory (QCT) and variational transition-state theory (VTST) with multidimensional tunneling. The RPMD approach yielded results that are generally in better agreement with experimental rate coefficients than the VTST and QCT ones, especially at low temperatures, attributable to its capacity to capture quantum effects such as tunneling and zero-point energy. Additionally, the theoretical results support one group of existing experiments over the other. In addition, rate coefficients for the D + O 3 → OD + O 2 reaction are also reported using the same methods, which will allow a stringent assessment of future experimental measurements, thus helping to reduce the uncertainty in the recommended rate coefficients of this reaction.
High-Energy All-Solid-State Organic–Lithium Batteries Based on Ceramic Electrolytes
Recent studies have identified unique properties of organic battery electrode materials such as moderate redox potentials and mechanical softness which are uniquely beneficial for all-solid-state batteries based on ceramic electrolytes. Here, we further explore the promise of organic materials and demonstrate a sulfide electrolyte- based organic-lithium battery with a specific energy of 828 Wh kg –1 , rivaling the state-of- the-art of all-solid-state batteries. Two innovation steps are responsible for the accomplishment. First, the combination of lithium anode and the high-capacity cathode material pyrene-4,5,9,10-tetraone ensures a high theoretical specific energy. Second, the microstructure of the organic cathode is optimized with the introduction of cryomilling, a technique common to processing soft materials but not familiar to electrode fabrication. The cathode material utilization increases to 99.5% as a result, up from the 55–89% previously reported for ceramic electrolyte-based solid-state organic batteries. In conclusion, the improvement highlights the special requirements of solid-state organic electrodes for microstructural engineering while preserving the chemical integrity of components.
Perovskite-Derivative Valleytronics
Halide perovskites are revolutionizing the renewable energy sector owing to their high photovoltaic efficiency, low manufacturing cost, and flexibility. Their remarkable mobility and long carrier lifetime are also valuable for information technology, but fundamental challenges like poor stability under an electric field prevent realistic applications of halide perovskites in electronics. Here, it is discovered that valleytronics is a promising route to leverage the advantages of halide perovskites and derivatives for information storage and processing. The synthesized all-inorganic lead-free perovskite derivative, Cs 3 Bi 2 I 9 , exhibits strong light-matter interaction and parity-dependent optically addressable valley degree of freedom. In this work, robust optical helicity in all odd-layer-number crystals with inversion symmetry breaking is observed, indicating excitonic coherence extending well beyond 11 layers. The excellent optical and valley properties of Cs 3 Bi 2 I 9 arise from the unique parallel bands, according to first principles calculations. This discovery points to new materials design principles for scalable valleytronic devices and demonstrates the promise of perovskite derivatives beyond energy applications.
Origin of the “odd” behavior in the ultraviolet photochemistry of ozone
Significance This study solves a 30-y mystery about the origin of dramatic oscillations in the quantum product states of 16 O 3 upon photodissociation. Ozone is a key component of the atmosphere and undergoes complex cycles of formation and destruction by photodissociation and reaction. These dynamics are a rich proving ground for theories of quantum reaction dynamics as well as subtleties such as nuclear spin-statistics and symmetry. A previous theory constructed to explain the observed oscillations, although plausible, was not fully consistent with experimental measurements. Our quantum model and calculations show conclusively the origin of the effect, and match new more detailed experiments.
Photo-excitation of long-lived transient intermediates in ultracold reactions
In many chemical reactions, the transformation from reactants to products is mediated by transient intermediate complexes. For gas-phase reactions involving molecules with a few atoms, these complexes typically live on the order of 10 ps or less before dissociating, and are therefore rarely influenced by external processes. Here, we demonstrate that the transient intermediate complex K 2 Rb 2 *, formed from collisions between ultracold KRb molecules, undergoes rapid photo-excitation in the presence of a continuous-wave laser source at 1,064 nm, a wavelength commonly used to confine ultracold molecules. These excitations are facilitated by the exceptionally long lifetime of the complex under ultracold conditions. Indeed, by monitoring the change in the complex population after the sudden removal of the excitation light, we directly measure the lifetime of the complex to be 360 ± 30 ns, in agreement with our calculations based on the Rice–Ramsperger–Kassel–Marcus (RRKM) statistical theory. Furthermore, our results shed light on the origin of the two-body loss widely observed in ultracold molecule experiments. Additionally, the long complex lifetime, coupled with the observed photo-excitation pathway, opens up the possibility to spectroscopically probe the structure of the complex with high resolution, thus elucidating the reaction dynamics.