Search NASA⌕ Search

Engineering topics

Guo, J

Publications and source records attributed to Guo, J.

31 records · Page 2

Probing the evolution of antiferromagnetism in multiferroics

This study delineates the evolution of magnetic order in epitaxial films of the room-temperature multiferroic BiFeO3 system. Using angle- and temperature-dependent dichroic measurements and spectromicroscopy, we have observed that the antiferromagnetic order in the model multiferroic BiFeO3 evolves systematically as a function of thickness and strain. Lattice-mismatch-induced strain is found to break the easy-plane magnetic symmetry of the bulk and leads to an easy axis of magnetization which can be controlled through strain. Understanding the evolution of magnetic structure and how to manipulate the magnetism in this model multiferroic has significant implications for utilization of such magnetoelectric materials in future applications.

36 MATERIALS SCIENCE↗

Structure, dynamics and power conversion efficiency correlations in a new low bandgap polymer : PCBM solar cell.

Molecular packing structures and photoinduced charge separation dynamics have been investigated in a recently developed bulk heterojunction (BHJ) organic photovoltaic (OPV) material based on poly(thienothiophene-benzodithiophene) (PTB1) with a power conversion efficiency (PCE) of >5% in solar cell devices. Grazing incidence X-ray scattering (GIXS) measurements of the PTB1:PCBM ([6,6]-phenyl-C{sub 61}-butyric acid methyl ester) films revealed {pi}-stacked polymer backbone planes oriented parallel to the substrate surface, in contrast to the {pi}-stacked polymer backbone planes oriented perpendicular to the substrate surface in regioregular P3HT [poly(3-hexylthiophene)]:PCBM films. A {approx}1.7 times higher charge mobility in the PTB1:PCBM film relative to that in P3HT:PCBM films is attributed to this difference in stacking orientation. The photoinduced charge separation (CS) rate in the pristine PTB1:PCBM film is more than twice as fast as that in the annealed P3HT:PCBM film. The combination of a small optical gap, fast CS rate, and high carrier mobility in the PTB1:PCBM film contributes to its relatively high PCE in the solar cells. Contrary to P3HT:PCBM solar cells, annealing PTB1:PCBM films reduced the device PCE from 5.24% in the pristine film to 1.92% due to reduced interfacial area between the electron donor and the acceptor. Consequently, quantum yields of exciton generation and charge separation in the annealed film are significantly reduced compared to those in the pristine film.

14 SOLAR ENERGY↗

Oxygen K-Edge Emission And Absorption Spectroscopy of Iron Oxyhydroxide Nanoparticles

Transition metal oxide and oxyhydroxide nanoparticles are the focus of considerable current interest in geochemistry. Much progress has been made in understanding the structure and phase relationships in mineral nanoparticles, but the effects of small size and modified surface structure on reactivity remains an outstanding problem. Common environmental nanoparticles have been shown to exhibit enhanced chemical reactivity relative to bulk mineral surfaces, but the origin of this behavior is not well established. We studied the electronic structure component of mineral reactivity by comparing soft x-ray absorption and emission spectra of bulk goethite ({alpha}-FeOOH) with spectra obtained from {approx}6 nm FeOOH nanoparticles and larger FeOOH nanoparticles obtained by hydrothermal coarsening. The semiconductor band gap is reduced in the FeOOH nanoparticles, mainly due to the presence of additional states in the upper valence band. We performed ab initio simulation of the electronic structure of oxygen sites at the 010 surface of goethite, and observe that oxygen sites with reduced metal coordination contribute to the O 2p DOS at higher binding energy. Hence we conclude that FeOOH nanoparticle surfaces are more disordered than the surfaces of goethite, and that this structural component is likely the dominant cause of enhanced rates of reductive dissolution.

36 MATERIALS SCIENCE↗

Design and Optimization of Renin Inhibitors: Orally Bioavailable Alkyl Amines

Structure-based drug design led to the identification of a novel class of potent, low MW alkylamine renin inhibitors. Oral administration of lead compound 21l, with MW of 508 and IC{sub 50} of 0.47 nM, caused a sustained reduction in mean arterial blood pressure in a double transgenic rat model of hypertension.

59 BASIC BIOLOGICAL SCIENCES↗

Novel zinc phthalocyanine-benzoquinone rigid dyad and its photoinduced electron transfer properties.

While preparing the first structurally rigid zinc phthalocyanine-benzoquinone (ZnPc-BQ) dyad as a model for photoinduced charge separation mimicking natural photosynthesis, a convenient method is developed for in situ generation of a benzoquinone chromophore in the dyad using an iso-butyryl mask. The dyad has no rotamers and possesses a fixed distance between ZnPc and BQ moieties (center-to-center and edge-to-edge distances are 9.40 and 2.14 {angstrom}, respectively). The dyad displays unusual electronic perturbation in the ground state, resulting from the interactions between Pc and BQ, and exhibits photoinduced electron transfer with a lifetime of 40 ps of the charged separated states. The steady-state fluorescence and electrochemical behavior of the dyad are evaluated. This study opens a route to subsequent dyads, triads, and complex architectures of electron donor-acceptor arrays with rigid structures and long charge separation states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the amorphous to crystalline phase transition of chemical solution deposited Pb(Zr30Ti70)O3 thin films by soft x-ray absorption and soft x-ray emission spectroscopy

Chemical solution deposited (CSD) complex oxide thin films attract considerable interest in various emerging fields as for example, fuel cells, ferroelectric random access memories or coated conductors. In the present paper the results of soft-x-ray spectroscopy between 100 eV and 500 eV on the amorphous to crystalline phase transition of ferroelectric PbZr{sub 0.3}Ti{sub 0.7}O{sub 3} (PZT) thin films are presented. Five CSD samples derived from the same wafer coated with a PZT film pyrolyzed at 350 C were heat treated at different temperatures between 400 C and 700 C. At first the sample were morphologically and electrically characterized. Subsequently the soft-x-ray absorption and emission experiments were performed at the undulator beamline 8.0 of the Advanced Light Source of the Lawrence Berkeley National Laboratory. Soft-x-ray absorption spectra were acquired for the Ti L{sub 2,3-}, O K-, and C K-edge thresholds by using simultaneously the total electron yield (TEY) and total fluorescence yield (TFY) detection methods. For two samples, annealed at 400 C and 700 C, respectively, the resonant inelastic soft-x-ray spectroscopy (RIXS) was applied for various excitation energies near the Ti L-, O K-edges. We observed clear evidence of a rutile phase at untypically low temperatures. This rutile phase transforms into the perovskite phase upon increasing annealing temperature. These results are discussed in the framework of current microscopic models of the PZT (111) texture selection.

36 MATERIALS SCIENCE↗

Effect of zirconium addition on the impact toughness of the heat affected zone in a high strength low alloy pipeline steel

The effect of zirconium additions on the impact toughness of the heat affected zone in a high strength low alloy pipeline steel was studied, and the corresponding toughening mechanism examined when the welding was conducted with large heat input. The welding of steels was simulated on a Gleeble 2000. Microstructural observations, energy dispersive X-ray spectroscopy and diffraction analyses were conducted using optical microscopy, scanning electron microscopy and transmission electron microscopy, respectively. The impact toughness of the heat affected zone was improved by addition of zirconium into steel, especially when a large welding heat input was used. This improvement is attributable to MnS precipitation on the pre-formed ZrO{sub 2} as well as the formation of intragranular ferrite.

36 MATERIALS SCIENCE↗

Active RF Pulse Compression using Electrically Controlled Semiconductor Switches

In this paper, we will present our recent results on the research of the ultra-fast high power RF switches based on silicon. We have developed a switch module at X-band which can use a silicon window as the switch. The switching is realized by generation of carriers in the bulk silicon. The carriers can be generated electrically or/and optically. The electrically controlled switches use PIN diodes to inject carrier. We have built the PIN diode switches at X-band, with <300ns switching time. The optically controlled switches use powerful lasers to excite carriers. By combining the laser excitation and electrical carrier generation, significant reduction in the required power of both the laser and the electrical driver is expected. High power test is under going.

43 PARTICLE ACCELERATORS↗

Alternative Fluoropolymers to Avoid the Challenges Associated with Perfluorooctanoic Acid

The degradation of stain-resistant coating materials leads to the release of biopersistent perfluorooctanoic acid (PFOA) to the environment. In order to find the environmentally friendly substitutes, we have designed and synthesized a series of nonbiopersistant fluorinated polymers containing perfluorobutyl groups in the side chains. The surface properties of the new coating materials were characterized by static and dynamic contact angle measurements. The new coating materials demonstrate promising hydrophobic and oleophobic properties with low surfaces tensions. The wetting properties and surface structure of the polymers were tuned by varying the 'spacer' structures between the polymer backbones and the perfluorinated groups of the side chains. The relationship between orientations of the fluorinated side chains and performances of polymer surfaces were further investigated by near-edge X-ray fine absorption structure (NEXAFS) experiments and differential scanning calorimetry (DSC).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compositional characterization and imaging of "Wall-bound" acylesters of Populus trichocarpa Reveal Differential Accumulation of acyl Molecules in Normal and Reactive Woods

Acylesterification is one of the common modifications of cell wall non-cellulosic polysaccharides and/or lignin primarily in monocot plants. We analyzed the cell-wall acylesters of black cottonwood (Populus trichocarpa Torr. & Gray) with liquid chromatography-mass spectrometry (LC-MS), Fourier transform-infrared (FT-IR) microspectroscopy, and synchrotron infrared (IR) imaging facility. The results revealed that the cell wall of dicotyledonous poplar, as the walls of many monocot grasses, contains a considerable amount of acylesters, primarily acetyl and p-hydroxycinnamoyl molecules. The 'wall-bound' acetate and phenolics display a distinct tissue specific-, bending stress responsible- and developmental-accumulation pattern. The 'wall-bound' p-coumarate predominantly accumulated in young leaves and decreased in mature leaves, whereas acetate and ferulate mostly amassed in the cell wall of stems. Along the development of stem, the level of the 'wall-bound' ferulate gradually increased, while the basal level of p-coumarate further decreased. Induction of tension wood decreased the accumulation of the 'wall-bound' phenolics while the level of acetate remained constant. Synchrotron IR-mediated chemical compositional imaging revealed a close spatial distribution of acylesters with cell wall polysaccharides in poplar stem. These results indicate that different 'wall-bound' acylesters play distinct roles in poplar cell wall structural construction and/or metabolism of cell wall matrix components.

09 BIOMASS FUELS↗

Temperature dependent evolution of the electronic and local atomic structure in the cubic colossal magnetoresistive manganite La1-xSrxMnO3

We have studied the temperature-dependent evolution of the electronic and local atomic structure in the cubic colossal magnetoresistive manganite La{sub 1-x}Sr{sub x}MnO{sub 3} (x= 0.3-0.4) with core and valence level photoemission (PE), x-ray absorption spectroscopy (XAS), x-ray emission spectroscopy (XES), resonant inelastic x-ray scattering (RIXS), extended x-ray absorption fine structure (EXAFS) spectroscopy and magnetometry. As the temperature is varied across the Curie temperature T{sub c}, our PE experiments reveal a dramatic change of the electronic structure involving an increase in the Mn spin moment from {approx} 3 {micro}B to {approx} 4 {micro}B, and a modification of the local chemical environment of the other constituent atoms indicative of electron localization on the Mn atom. These effects are reversible and exhibit a slow-timescale {approx}200 K-wide hysteresis centered at T{sub c}. Based upon the probing depths accessed in our PE measurements, these effects seem to survive for at least 35-50 {angstrom} inward from the surface, while other consistent signatures for this modification of the electronic structure are revealed by more bulk sensitive spectroscopies like XAS and XES/RIXS. We interpret these effects as spectroscopic fingerprints for polaron formation, consistent with the presence of local Jahn-Teller distortions of the MnO{sub 6} octahedra around the Mn atom, as revealed by the EXAFS data. Magnetic susceptibility measurements in addition show typical signatures of ferro-magnetic clusters formation well above the Curie temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗