Engineering topics
Guo, Songhao
Publications and source records attributed to Guo, Songhao.
Exciton engineering of 2D Ruddlesden–Popper perovskites by synergistically tuning the intra and interlayer structures
Designing two-dimensional halide perovskites for high-performance optoelectronic applications requires deep understanding of the structure-property relationship that governs their excitonic behaviors. However, a design framework that considers both intra and interlayer structures modified by the A-site and spacer cations, respectively, has not been developed. Here, we use pressure to synergistically tune the intra and interlayer structures and uncover the structural modulations that result in improved optoelectronic performance. Under applied pressure, (BA) 2 (GA)Pb 2 I 7 exhibits a 72-fold boost of photoluminescence and 10-fold increase of photoconductivity. Based on the observed structural change, we introduce a structural descriptor χ that describes both the intra and interlayer characteristics and establish a general quantitative relationship between χ and photoluminescence quantum yield: smaller χ correlates with minimized trapped excitons and more efficient emission from free excitons. Building on this principle, we design a perovskite (CMA) 2 (FA)Pb 2 I 7 that exhibits a small χ and an impressive photoluminescence quantum yield of 59.3%.
Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero‐Dimensional [(C 6 H 5 ) 4 P] 2 SbCl 5 Enabled by Pressure‐Induced Lone Pair‐π Interaction
Abstract Low‐dimensional (low‐D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low‐D OMHHs, especially the zero‐D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near‐unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C 6 H 5 ) 4 P] 2 SbCl 5 . In situ experimental characterizations and theoretical simulations reveal that the pressure‐induced electronic coupling between the lone‐pair electrons of Sb 3+ and the π electrons of benzene ring (lp‐π interaction) serves as an unexpected “bridge” for the charge transfer. Our work opens a versatile strategy for the new materials design by manipulating the lp‐π interactions in organic–inorganic hybrid systems.
Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero-Dimensional [(C 6 H 5 ) 4 P] 2 SbCl 5 Enabled by Pressure-Induced Lone Pair-π Interaction
Low-dimensional (low-D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low-D OMHHs, especially the zero-D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near-unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C 6 H 5 ) 4 P] 2 SbCl 5 . In situ experimental characterizations and theoretical simulations reveal that the pressure-induced electronic coupling between the lone-pair electrons of Sb 3+ and the π electrons of benzene ring (lp-π interaction) serves as an unexpected “bridge” for the charge transfer. Further, our work opens a versatile strategy for the new materials design by manipulating the lp-π interactions in organic–inorganic hybrid systems.
Reconfiguring band-edge states and charge distribution of organic semiconductor–incorporated 2D perovskites via pressure gating
Two-dimensional (2D) semiconductor heterostructures are key building blocks for many electronic and optoelectronic devices. Reconfiguring the band-edge states and modulating their interplay with charge carriers at the interface in a continuous manner have long been sought yet are challenging. Here, using organic semiconductor–incorporated 2D halide perovskites as the model system, we realize the manipulation of band-edge states and charge distribution via mechanical—rather than chemical or thermal—regulation. Compression induces band-alignment switching and charge redistribution due to the different pressure responses of organic and inorganic building blocks, giving controllable emission properties of 2D perovskites. We propose and demonstrate a “pressure gating” strategy that enables the control of multiple emission states within a single material. We also reveal that band-alignment transition at the organic-inorganic interface is intrinsically not well resolved at room temperature owing to the thermally activated transfer and shuffling of band-edge carriers. This work provides important fundamental insights into the energetics and carrier dynamics of hybrid semiconductor heterostructures.
Pressure Engineering Promising Transparent Oxides with Large Conductivity Enhancement and Strong Thermal Stability
Abstract Transparent conducting oxides (TCO) with high electrical conductivity and high visible light transparency are desired for a wide range of high‐impact engineering. Yet, usually, a compromise must be made between conductivity and transparency, limiting the practical application of a TCO to the next level. Furthermore, TCO performance is highly sensitive to composition, so conventional synthesis methods, such as chemical doping, cannot unravel the mysteries of the quantitative structure–performance relationship. Thus, improving the fundamental understanding or creating materials‐by‐design has limited success. Here, a strategy is proposed to modulate the lattice and electronic and optical properties precisely by applying pressure on a TCO. Strikingly, after compression–decompression treatment on the indium titanium oxides (ITiO), a highly transparent and metastable phase with two orders of magnitude enhancement in conductivity is synthesized from an irreversible phase transition. Moreover, this phase possesses previously unattainable filter efficiency on hazardous blue light up to 600 °C, providing potential for healthcare‐related applications with strong thermal stability up to 200 °C. These results demonstrate that pressure engineering is a clean and effective tool for tailoring functional materials that are not achievable by other means, providing an exciting alternative property‐tuning dimension in materials science.
Nested order-disorder framework containing a crystalline matrix with self-filled amorphous-like inna
Explore the source record for details and available documents.
Pressure-Induced Amorphization and Crystallization of Heterophase Pd Nanostructures
Explore the source record for details and available documents.
Pressure-induced robust emission in a zero-dimensional hybrid metal halide (C[subscript 9]NH[subscri
Explore the source record for details and available documents.
Regulating Exciton–Phonon Coupling to Achieve a Near‐Unity Photoluminescence Quantum Yield in One‐Dimensional Hybrid Metal Halides
Abstract Low‐dimensional hybrid metal halides are emerging as a highly promising class of single‐component white‐emitting materials for their unique broadband emission from self‐trapped excitons (STEs). Despite substantial progress in the development of these metal halides, many challenges remain to be addressed to obtain a better fundamental understanding of the structure–property relationship and realize the full potentials of this class of materials. Here, via pressure regulation, a near 100% photoluminescence quantum yield (PLQY) of broadband emission is achieved in a corrugated 1D hybrid metal halide C 5 N 2 H 16 Pb 2 Br 6 , which possesses a highly distorted structure with an initial PLQY of 10%. Compression reduces the overlap between STE states and ground state, leading to a suppressed phonon‐assisted non‐radiative decay. The PL evolution is systematically demonstrated to be controlled by the pressure‐regulated exciton–phonon coupling which can be quantified using Huang–Rhys factor S . Detailed studies of the S ‐PLQY relation for a series of 1D hybrid metal halides (C 5 N 2 H 16 Pb 2 Br 6 , C 4 N 2 H 14 PbBr 4 , C 6 N 2 H 16 PbBr 4 , and (C 6 N 2 H 16 ) 3 Pb 2 Br 10 ) reveal a quantitative structure–property relationship that regulating S factor toward 28 leads to the maximum emission.
Enhanced Photocurrent of All-Inorganic Two-Dimensional Perovskite Cs[subscript 2]PbI[subscript 2]Cl[
Explore the source record for details and available documents.
Regulating off-centering distortion maximizes photoluminescence in halide perovskites
Abstract Metal halide perovskites possess unique atomic and electronic configurations that endow them with high defect tolerance and enable high-performance photovoltaics and optoelectronics. Perovskite light-emitting diodes have achieved an external quantum efficiency of over 20%. Despite tremendous progress, fundamental questions remain, such as how structural distortion affects the optical properties. Addressing their relationships is considerably challenging due to the scarcity of effective diagnostic tools during structural and property tuning as well as the limited tunability achievable by conventional methods. Here, using pressure and chemical methods to regulate the metal off-centering distortion, we demonstrate the giant tunability of photoluminescence (PL) in both the intensity (>20 times) and wavelength (>180 nm/GPa) in the highly distorted halide perovskites [CH3NH3GeI3, HC(NH2)2GeI3, and CsGeI3]. Using advanced in situ high-pressure probes and first-principles calculations, we quantitatively reveal a universal relationship whereby regulating the level of off-centering distortion towards 0.2 leads to the best PL performance in the halide perovskites. By applying this principle, intense PL can still be induced by substituting CH3NH3+ with Cs+ to control the distortion in (CH3NH3)1-xCsxGeI3, where the chemical substitution plays a similar role as external pressure. The compression of a fully substituted sample of CsGeI3 further tunes the distortion to the optimal value at 0.7 GPa, which maximizes the emission with a 10-fold enhancement. This work not only demonstrates a quantitative relationship between structural distortion and PL property of the halide perovskites but also illustrates the use of knowledge gained from high-pressure research to achieve the desired properties by ambient methods.