Effect of Melt Pool Boundaries on Repassivation of Selective Laser Melted Stainless Steel.
Abstract not provided.
Melia, Michael↗
Engineering topics
Guo, Xiaolei
Publications and source records attributed to Guo, Xiaolei.
Electrical Contact Resistance in REBCO Stacks and Cables With Modified Surfaces
Not provided.
Engineering↗
Long-term interactive corrosion between International Simple Glass and stainless steel
The interactive corrosion between stainless steel 316 (SS) and International Simple Glass (ISG) has been studied for 12 months. The samples were placed in intimate contact to create crevice corrosion conditions on SS in a 0.6 M NaCl solution with and without 142 ppm dissolved silica species enriched in 29 Si. Corrosion on SS was observed with large pits located close to the crevice mouth at the end of 1 year in 0.6 M NaCl solution. The SS corrosion was also associated with the dissolution of nearby glass in a highly localized manner. When the leaching solution was saturated with silica species, the corrosion rate of SS was suppressed. However, the presence of SS enhances ISG dissolution in both conditions. The implications of the observed phenomena on the long-term storage of nuclear waste are discussed.
36 MATERIALS SCIENCE↗
Enhanced crevice corrosion of stainless steel 316 by degradation of Cr-containing hollandite crevice former
This study explores the corrosion interactions between stainless steel 316 (SS316), a candidate nuclear waste canister material, and Cr-containing hollandite (Ba 1.15 Cr 2.3 Ti 5.7 O 16 ), a model ceramic nuclear waste form. The two materials were corroded in close proximity in 0.6 M NaCl solution at 90 °C for 28 days. Severe crevice corrosion was observed on the stainless steel surface after the corrosion experiment, which is likely associated with the rapid accumulation of Cr 3+ cations originating from both SS316 and the Cr-containing hollandite. Furthermore, the enhanced corrosion of SS316 by the corrosion products of hollandite is quantitatively explained using a classical crevice corrosion model.
36 MATERIALS SCIENCE↗
Recent Advances in Corrosion Science Applicable To Disposal of High-Level Nuclear Waste
High level radioactive waste is accumulating at temporary storage locations around the world and will eventually be placed in deep geological repositories. Many different types of geological formation are under consideration, but all will eventually allow water to contact the metallic waste containers considering that the period of performance required to allow sufficient decay of dangerous radionuclides is on the order of 105 – 106 years. Corrosion of the containers and waste forms in the aqueous repository environment is therefore a concern. This review describes the recent advances of the field of materials corrosion based on the work of the Center for Performance and Design of Nuclear Waste Forms and Containers (WastePD) to address the issues associated with the long-term performance assessment and the design of materials with improved performance, where performance is defined as resistance to aqueous corrosion. Glass, crystalline ceramics, and metals are discussed separately, and then the near field interactions of these different materials classes are addressed. Recommendations for future directions are provided.
Frankel, Gerald↗
Electrochemical metrics for corrosion resistant alloys
Abstract Corrosion is an electrochemical phenomenon. It can occur via different modes of attack, each having its own mechanisms, and therefore there are multiple metrics for evaluating corrosion resistance. In corrosion resistant alloys (CRAs), the rate of localized corrosion can exceed that of uniform corrosion by orders of magnitude. Therefore, instead of uniform corrosion rate, more complex electrochemical parameters are required to capture the salient features of corrosion phenomena. Here, we collect a database with an emphasis on metrics related to localized corrosion. The six sections of the database include data on various metal alloys with measurements of (1) pitting potential, E pit , (2) repassivation potential, E rp , (3) crevice corrosion potential, E crev , (4) pitting temperature, T pit , (5) crevice corrosion temperature, T crev , and (6) corrosion potential, E corr , corrosion current density, i corr , passivation current density, i pass , and corrosion rate. The experimental data were collected from 85 publications and include Al- and Fe-based alloys, high entropy alloys (HEAs), and a Ni-Cr-Mo ternary system. This dataset could be used in the design of highly corrosion resistant alloys.
36 MATERIALS SCIENCE↗
Nanoscale TiO 2 coating improves water stability of Cs 2 SnCl 6
To improve the stability of Cs 2 SnCl 6 under aqueous/moisture environments, we applied a concept of artificial passivation by depositing a protective TiO 2 coating of 10 nm on the surface of Cs 2 SnCl 6 . Static leaching experiments results indicate that the initial release rates of Cs + and Cl - are decreased by 20–30 times with TiO 2 coating, suggesting its possibility to improve the short-term water/environmental stability of Cs 2 SnCl 6 . An amorphous-to-crystalline phase transition in TiO 2 film was observed, possibly resulting in degradation of Cs 2 SnCl 6 . However, the crystalline TiO 2 film still remains after 21 days water exposure and can still act as an effective passivation layer to reduce the release rates of Cs + and Cl - by as much as about 17 and 7 times, respectively, relative to static leaching without artificial coatings. Therefore, the water/environmental stability of metal halide perovskite Cs 2 SnCl 6 , which is a highly soluble molecular salt, can be enhanced by the nanoscale TiO 2 coating as an artificial passivation film.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Insights into the mechanisms controlling the residual corrosion rate of borosilicate glasses
Borosilicate glasses are widely used to confine high-level radioactive wastes. The lifetime of these materials could reach hundreds of thousands of years if leaching of the glass into groundwater enables the formation of a passivating gel layer. Even in this regime, the glass will never stop corroding as thermodynamic equilibrium between glass and solution cannot be achieved. Therefore, accurate predictions of glass durability including passivation, require a deep understanding of the mechanisms controlling the so-called residual rate. However, despite tremendous efforts, these mechanisms remain poorly understood. Here, focusing on the behavior of the soluble elements of the International Simple Glass (B, Na, and Ca), we show that the residual rate is controlled by the behavior of B, a glass former supposed to dissolve instantaneously when in contact with water and thus widely considered as an ideal tracer. We then demonstrate that B release is controlled by multiple processes highly dependent on the pH. At the beginning of the passivating layer formation, the hydrolysis of B-O-Si linkages is rate-limiting and has an activation energy of ~60 kJ mol –1 , a value slightly lower than that for breaking Si-O-Si linkages. Once the fraction of closed pores resulting from gel restructuring is high enough, then diffusion of both reactants (water molecules) and some products (mainly B aq , Ca aq ) through the growing gel layer becomes rate-limiting. Consequently, B and Ca accumulate in an inner layer referred to as the active zone, with potential feedback on the B-O-Si hydrolysis. A new paradigm, including B as a key element of the system, is proposed to develop a comprehensive model for the corrosion of borosilicate glass.
36 MATERIALS SCIENCE↗
The impact of autonomous vehicles on commute ridesharing with uncertain work end time
The uncertainty in work end time can prevent ridesharing between two commuters with identical home and work locations. This effect can be alleviated by autonomous vehicles (AV): when two commuters share a ride from home to work, if the realized work end times result in a long wait between the two, an additional AV can be easily repositioned from home to work, whereas with regular human-driven vehicles one has to either bear the long wait or request expensive taxi service. This observation implies that AVs have great potential for increasing commute ridesharing. To study this effect, we develop evening commute bottleneck models with uncertain work end time and establish mode choice equilibrium for the round-trip commute. We find that, with regular vehicles, because of the expected waiting cost caused by work end time uncertainty, commuters typically do not share rides even though they have the same home and work locations. With AVs, commuters always share rides for the morning commute, and they also share rides for the evening commute if their work end times turn out to be close; otherwise, they reposition an additional AV to pick one of them up. Finally, our numerical examples show that AVs can encourage commute ridesharing and significantly reduce the expected round-trip travel costs for commuters.
97 MATHEMATICS AND COMPUTING↗
Review of corrosion interactions between different materials relevant to disposal of high-level nuclear waste
Abstract This review covers the corrosion interactions between different materials that are relevant to the disposal of high-level nuclear waste, in particular the waste forms and containers. The materials of interest are borosilicate glass, crystalline ceramics, metal alloys, and any corrosion products that might form. The available data show that these interactions depend on the structure, chemistry, thermodynamic history, and proximity of the materials in contact, as well as the environmental attributes, such as temperature, solution chemistry, and radiation. Several key mechanisms that govern these interactions are highlighted. Scientific gaps and open questions are summarized and discussed.
Materials Science↗
Reply to: How much does corrosion of nuclear waste matrices matter
We thank Mallants and Chapman for their comments on our recent work and are mostly in agreement. However, while the applicability of the results to different environmental conditions requires more attention, we maintain that this study could be relevant even to repositories in saturated reduced environments. Oxidants other than oxygen might be present in anoxic groundwater repository environments and could also trigger the corrosion mechanism we described. .
Guo, Xiaolei↗
Reply to: How much does corrosion of nuclear waste matrices matter
No abstract provided.
36 MATERIALS SCIENCE↗
Corrosion interactions between stainless steel and lead vanado-iodoapatite nuclear waste form part II
This paper studied the release of iodine from lead vanado-iodoapatite (I-APT, Pb 9.85 (VO 4 ) 6 I 1.7 ), a potential nuclear waste form for the radioactive waste element of I-129, which can be enhanced when crevice corrosion of stainless steel (SS) occurring nearby. Reference corrosion studies of I-APT were performed in different bulk solutions including DI water, 0.6 M and 6 M NaCl, and 0.1 M HNO 3 without metal crevice corrosion interactions. The localized enrichment of Cl – , one of the major consequences of SS crevice corrosion, was found to be the decisive factor that led to the enhanced release of iodine. A surface alteration layer consisting of a mixture of nanocrystalline I-APT and Cl-rich apatite (Cl-APT) formed on I-APT surface. Meanwhile, large Cl-APT crystals formed at the crevice mouth on the I-APT surface. This study reveals a new near-field corrosion mechanism for ceramic waste forms when they are exposed to aggressive local corrosive conditions created by the electrochemical reactions of nearby metals. The insight gained in this study could be beneficial for a more accurate prediction of waste form degradation.
36 MATERIALS SCIENCE↗
Degradation mechanism of lead-vanado-iodoapatite in NaCl solution
Degradation mechanism of lead-vanado-iodoapatite (IAPT) in NaCl solution at 90 °C was investigated through systematic characterization of surface morphology, microstructure and microchemistry evolution of the alteration layer. Nano-scale characterization indicated that IAPT crystals degraded from grain boundaries toward inner grains, forming ultrafine Cl-bearing crystallites. A coupled interface dissolution-reprecipitation replacement mechanism and the ion exchange between Cl - and I - across the degradation zone may together play roles in determining the nano-scale degradation behavior of IAPT. This work highlights the degradation through multiple reactions and elemental transport across the liquid-solid and solid-solid interfaces at length scales from sub-millimeter to nanoscale.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Corrosion interactions between stainless steel and lead vanado-iodoapatite nuclear waste form part I
This study explores the corrosion interactions between a metallic canister material, stainless steel (SS) 316, and an I-bearing ceramic waste form, lead vanado-iodoapatite (I-APT, Pb 9.85 (VO 4 ) 6 I 1.7 ), in a chloride solution. Crevice corrosion of the SS in close proximity to the I-APT resulted in the development of an aggressive environment at the interface of the two materials, which was acidic and enriched in Cl – anions. I-APT also corroded in the crevice region, primarily through ion-exchange between the I – ions from the I-APT matrix and anions from the environment. The enrichment of Cl – anions within the occluded crevice space as the result of SS crevice corrosion enhanced the corrosion of I-APT. The release of iodine from this apatite waste form could be accelerated owing to this mechanism. This is evidenced by a depletion of iodine from the I-APT matrix and a large amount of Cl-bearing precipitates on the surfaces of both SS and I-APT. On the other hand, the corrosion of I-APT leads to the precipitation of a V- and Pb-rich layer, which inhibits the localized corrosion of SS to an extent. This study advances the understanding of the near-field corrosion interactions between metallic canisters and ceramic waste forms.
36 MATERIALS SCIENCE↗
Epsilon Metal: A Waste Form for Noble Metals from Used Nuclear Fuel
Epsilon metal (e-metal) is the metallic phase that forms as inclusions at the grain boundaries in the UO2 fuel during reactor operation. This metal is composed of Pd, Mo, Rh, Ru, and Tc. These metallic inclusions are insoluble in strong acid and remnants of these metallic inclusions have been found in the UO2 matrix that remains from the natural reactors in Gabon that were active 1.8 billion years ago, therefore e-metal should be an excellent waste form for the immobilization of the long-lived isotopes 107Pd (6.5 ? 106 a) and 99Tc (2.13 ? 105 a), with 99Tc being the isotope of interest for repository performance. Therefore, the chemical durability of this potential waste form is assessed in this study. Typically, corrosion rates for metallic materials are measured electrochemically because they are quick, inexpensive, and can reveal the mechanism by which a metal corrodes, at least initially. However, in a repository the waste form would be subjected to slowly flowing water without an applied electrical potential over long time periods. Therefore, the corrosion rates of e-metal specimens were measured with both electrochemical tests and the single-pass flow-through test (SPFT). Potentiodynamic and potentiostatic polarization results suggest that a thin passive film exists on the alloy surface, which seems to be responsible for its high corrosion resistance. Additionally, X-Ray photoelectron spectroscopic results suggest that Pd oxides are significantly enriched in the passive film Results from the SPFT show that the dissolution rates were weakly dependent on pH. Only Mo and Re were found in solution and were used for the calculation of the dissolution rates. In general, the electrochemically determined corrosion rates agree reasonably well with the initial dissolution rate measured with the SPFT test, but they are about one or two orders of magnitude higher than the steady state rates. The causes for this discrepancy are discussed.
epsilon-metal, nuclear waste form, corrosion, sing↗
Near-Field Corrosion Interactions between Glass and Corrosion Resistant Alloys
This study explores the corrosion interactions between model nuclear waste glass materials and corrosion resistant alloys, under conditions that simulate the near field of a nuclear waste repository. The interactions between the corrosion of stainless steel (SS) 316, alloy G30, or alloy 625, and international simple glass or soda-lime silica glass are systematically studied. The dissimilar materials were exposed in close proximity to each other in different electrolytes at 90 oC. After exposure, the glass surface exposed near metals showed different regimes of corrosion, with distinct surface morphologies and chemistries that were likely affected by the local environment created by the localized corrosion of metals. Surface and solution analyses showed that the corrosion rate of glass was enhanced by the presence of metals. Infrared spectroscopy data suggested the local build-up of stresses in the contact area of glass, which may lead to the mechanical instability of the glass alteration layer. On the other hand, the effect of glass on metal corrosion is strongly dependent on the leaching solution. In electrolytes containing abundant aggressive anions such as Cl-, glass seems to suppress the localized corrosion of SS by the precipitation of a Si-rich surface film that protects the SS substrate from solutions. However, in less aggressive electrolytes, the corrosion rate of SS was increased by the presence of glass corrosion products. Overall, our study showed that the hidden and localized damage on glass in contact with metals may enhance the release of incorporated radionuclides compared to typical uniform glass corrosion. Therefore, more attention should be paid to the corrosion interactions between metals and glass under repository conditions.
Guo, Xiaolei↗