Search NASA⌕ Search

Engineering topics

Gurevich, A. V.

Publications and source records attributed to Gurevich, A. V..

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

PRELIMINARY RESULTS OF MAGNETIC AND TEMPERATURE MAP SYSTEM FOR 3 GHz SUPERCONDUCTING RADIO FREQUENCY CAVITIES

Su­per­con­duct­ing radio fre­quency (SRF) cav­i­ties are fun­da­men­tal build­ing blocks of mod­ern par­ti­cle ac­cel­er­a­tors. A sur­face re­sis­tance in the tens of nanoOhm range is achieved when cool­ing these cav­i­ties to liq­uid he­lium tem­per­a­ture, ~2 - 4 K. One of the lead­ing sources of resid­ual losses in SRF cav­i­ties is trapped mag­netic flux. Flux trap­ping mech­a­nism de­pends on dif­fer­ent sur­face prepa­ra­tions and cool-down con­di­tions. We have de­signed, de­vel­oped and com­mis­sioned a com­bined mag­netic and tem­per­a­ture map­ping sys­tem using anisotropic mag­neto-re­sis­tance sen­sors and car­bon re­sis­tors, re­spec­tively, to study the flux trap mech­a­nism in 3 GHz sin­gle-cell nio­bium cav­i­ties. In this con­tri­bu­tion, we will de­scribe the ex­per­i­men­tal ap­pa­ra­tus and pre­sent pre­lim­i­nary test re­sults.

Parajuli, I. P.↗
DOE OSTI2022

Preliminary Results from Magnetic Field Scanning System for a Single-Cell Niobium Cavity

One of the building blocks of modern particle accelerators is superconducting radiofrequency (SRF) cavities. Niobium is the material of choice to build such cavities, which operate at liquid helium temperature (2 - 4 K) and have some of the highest quality factors found in Nature. There are several sources of residual losses, one of them is trapped magnetic flux, which limits the quality factor in SRF cavities. The flux trapping mechanism depends on different niobium surface preparations and cool-down conditions. Suitable diagnostic tools are not yet available to study the effects of such conditions on magnetic flux trapping. A magnetic field scanning system (MFSS) for SRF cavities using Hall probes and Fluxgate magnetometer has been designed, built, and is commissioned to measure the local magnetic field trapped in 1.3 GHz single-cell SRF cavities at 4 K. In this contribution, we will present the preliminary results from MFSS for a single cell niobium cavity.

Ciovati, G.↗
DOE OSTI2022

Magnetic Field Penetration Technique to Study High Field Shielding of Multilayered Superconductors

The SIS structure which consists of alternative thin layers of superconductors and insulators on a bulk niobium has been proposed to shield niobium cavity surface from high magnetic field and hence increase the accelerating gradient. The study of the behavior of multilayer super-conductors in an external magnetic field is essential to optimize their SRF performance. In this work we report the development of a simple and efficient technique to measure penetration of magnetic field into bulk, thin film and multilayer superconductors. Experimental setup contains a small superconducting solenoid which can produce a parallel surface magnetic field up to 0.5 T and Hall probes to detect penetrated magnetic field across the superconducting sample. This system was calibrated and used to study the effect of niobium sample thickness on the field of full magnetic flux penetration. We determined the optimum thickness of the niobium substrate to fabricate the multilayer structure for the measurements in our setup. This technique was used to measure penetration fields of Nb₃Sn thin films and Nb₃Sn/Al₂O₃ multi-layers deposited on Al₂O₃ wafers.

Senevirathne, I. H.↗
DOE OSTI2021

Measurements of Magnetic Field Penetration in Superconducting Materials for SRF Cavities

Superconducting radiofrequency (SRF) cavities used in particle accelerators operate in the Meissner state. To achieve high accelerating gradients, the cavity material should stay in the Meissner state under high RF magnetic field without penetration of vortices through the cavity wall. The field onset of flux penetration into a superconductor is an important parameter of merit of alternative superconducting materials other than Nb which can enhance the performance of SRF cavities. There is a need for a simple and efficient technique to measure the onset of field penetration into a superconductor directly. We have developed a Hall probe experimental setup for the measurement of the flux penetration field through a superconducting sample placed under a small superconducting solenoid magnet which can generate magnetic fields up to 500 mT. The system has been calibrated and used to measure different bulk and thin film superconducting materials. This system can also be used to study SIS multilayer coatings that have been proposed to enhance the vortex penetration field in Nb cavities.

Senevirathne, I. H.↗
DOE OSTI2021

Evaluation of Anisotropic Magnetoresistive (AMR) Sensors for a Magnetic Field Scanning System for SRF Cavities

One of the significant causes of residual losses in superconducting radio-frequency (SRF) cavities is trapped magnetic flux. The flux trapping mechanism depends on many factors that include cool-down conditions, surface preparation techniques, and ambient magnetic field orientation. Suitable diagnostic tools are not yet available to quantitatively correlate such factors’ effect on the flux trapping mechanism. A magnetic field scanning system (MFSS) consisting of AMR sensors, fluxgate magnetometers, or Hall probes is recently commissioned to scan the local magnetic field of trapped vortices around 1.3 GHz single-cell SRF cavities. In this contribution, we will present results from sensitivity calibration and the first tests of AMR sensors in the MFSS.

Parajuli, I. P.↗
NASA NTRS1991

On the evolution of pulsars

Data from a previous investigation on the angle chi between the axis of rotation and the magnetic dipole axis, determined from polarization observations, provides a complete catalog which makes it possible to carry out a detailed comparison of the theoretical results of this present investigation with the observed distribution of radio pulsars over the angel chi. Before such a comparison is made, the main features of a theory for pulsar evolution is described.

Beskin, V. S.↗
NASA NTRS1991

The spin down of the radio pulsars: Braking index

Presently, the value of the retardation dP/dt is well known for most radio pulsars. It is negative for all cases except one and is of the order of 10(exp -15). That single case is when the pulsar, which is located in the star globular system, can have a considerable acceleration leading to the opposite sign of P'= dP/dt due to the Doppler effect. Careful measurements of the period, P, also allow one to determine the variation of this retardation with the course of time- P'' = d(exp 2)P/dt(exp 2). The results of these measurements are usually represented in the form of the dimensionless retardation index n = omega'' omega/omega(exp 2)= 2 - P''P/P(exp 2) (omega is the angular velocity). The data for 21 pulsars are given. The parameter, n, is strongly undetermined both in value and sign in all cases except for four pulsars. Changes of the rotation period, P, and the inclination angle, chi, the angle between the axes of rotation and the magnetic moment are caused by two processes: the regular retardation and nutation due to deviation from the strict spherical shape of the neutron star. Losses which are caused by the currents flowing in the magnetosphere of the neutron star and by being closed on the star surface are considered. Such losses are critical for the neutron star magnetosphere which is full of dense plasma. Since the radio emission is generated in the dense plasma of the polar magnetosphere, then practically all radio pulsars are retarded by the current mechanism. The formula for the braking index is presented along with other aspects of the investigation.

Beskin, V. S.↗
NASA NTRS1985

Giant molecular clouds as regions of particle acceleration

One of the most interesting results of investigations carried out on the satellites SAS-II and COS-B is the discovery of unidentified discrete gamma sources. Possibly a considerable part of them may well be giant molecular clouds. Gamma emission from clouds is caused by the processes with participation of cosmic rays. The estimation of the cosmic ray density in clouds has shown that for the energy E approx. = I GeV their density can 10 to 1000 times exceed the one in intercloud space. We have made an attempt to determine the mechanism which could lead to the increase in the cosmic ray density in clouds.

Dogiel, V. A.↗