Search NASA⌕ Search

Engineering topics

Guruswamy, P.

Publications and source records attributed to Guruswamy, P..

5 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Effects of viscosity on transonic-aerodynamic and aeroelastic characteristics of oscillating airfoils

Studies were made to investigate the effects of viscosity on aerodynamic and aeroelastic characteristics of oscillating airfoils. The computer code LTRAN2 (viscous), which is based on a small disturbance aerodynamic theory, was used to make aerodynamic computations. Two viscous models, the viscous-ramp model and the lag-entrainment model were considered. The unsteady viscous effects were obtained by use of the quasi-steady assumptions. Two cases, a conventional airfoil, NACA 64A010, and a supercritical airfoil, MBB-A3, were studied at Mach numbers 0.796 and 0.7557, respectively. For both the airfoils, steady and unsteady aerodynamic computations were made by using inviscid and viscous theories. The steady and the unsteady results for the NACA 64A010 airfoil and the steady results for the MBB-A3 airfoil were compared with the available wind-tunnel results. Flutter speeds were computed for both airfoils by using the U-g method and the effects of viscosity on the airfoils were studied. Results from the viscous methods show improvements over the inviscid method.

Guruswamy, P.↗
NASA NTRS1983

Flutter analysis of a transport wing using XTRAN3S

As part of the continuing process of evaluating and validating the XTRAN3S unsteady transonic aerodynamic computer program, the code has been applied to the flutter analysis of a transport type wing. The configuration analyzed was an aspect ratio 8 wing with a taper ratio of 0.4, a quarter chord sweep of 20 degrees and a NACA 65A-012 airfoil section. The analytical results compare well with the experimental flutter boundary and exhibit the classical 'transonic dip'. A literature search of available transport wing transonic flutter data is included.

Myers, M. R.↗
NASA NTRS1982

Comparison between computations and experimental data in unsteady three-dimensional transonic aerodynamics, including aeroelastic applications

Comparisons were made of computed and experimental data in three-dimensional unsteady transonic aerodynamics, including aeroelastic applications. The computer code LTRAN3, which is based on small-disturbance aerodynamic theory, was used to obtain the aerodynamic data. A procedure based on the U-g method was developed to compute flutter boundaries by using the unsteady aerodynamic coefficients obtained from LTRAN3. The experimental data were obtained from available NASA publications. All the studies were conducted for thin, unswept, rectangular wings with circular-arc cross sections. Numerical and experimental steady and unsteady aerodynamic data were compared for a wing with an aspect ratio of 3 and a thickness ratio of 5% at Mach numbers of 0.7 and 0.9. Flutter data were compared for a wing with an aspect ratio of 5. Two thickness ratios, 6% at Mach numbers of 0.715, 0.851, and 0.913, and 4% at Mach number of 0.904, were considered. Based on the unsteady aerodynamic data obtained from LTRAN3, flutter boundaries were computed; they were compared with those obtained from experiments and the code NASTRAN, which uses linear aerodynamics.

Guruswamy, P.↗