Search NASA⌕ Search

Engineering topics

Gutiérrez, Oliver Y.

Publications and source records attributed to Gutiérrez, Oliver Y..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Formation of (Rh–Fe)–FeO x Complex Sites Enables Methanol Synthesis from CO 2

Here, we addressed the challenges of designing catalysts for selective CO 2 hydrogenation by incorporating oxide Fe species onto Rh nanoparticles. Nanoscopic FeO x domains created a “reverse catalyst” structure (i.e., a metal oxide supported on a metal) that increased the density of interfacial sites compared to traditional supported catalysts. The contact between the metal nanoparticle and the oxide overlayer induced the formation of a surface Rh-Fe alloy that stabilize methoxy groups while suppressing hydrogenolysis to methane. Sites at FeO x -metal interfaces interact with CO 2 sevenfold stronger than sites on metal surfaces, show larger energy barriers to cleave the C-O bonds, and offer a barrierless pathway for hydrogenation of methoxy species to methanol. Consequently, the multifunctional sites over FeO x /Rh-Fe catalysts highlight and meet the requirements of a selective methanol catalyst: strong interaction with CO 2 to ensure high density of transition states; metal sites to activate and make hydrogen available to surface intermediates; and high energy barriers for C-O bond cleavage to form carbides. These synthesis and catalytic chemistries, demonstrated for Rh-Fe-FeO x interfaces, enable us to overcome the limitations to the design of methanol production catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Activity of Brønsted Acid Sites in UiO-66 for Cyclohexanol Dehydration

Brønsted-acid sites are introduced via –OSO 3 H groups on the coordinatively unsaturated ZrO 2 nodes of UiO-66 metal organic frameworks (MOF). Such groups create strong Brønsted acidic sites that are active for cyclohexanol and ethanol dehydration (in liquid organic phase and gas phase, respectively). The intrinsic activity of Brønsted acid sites at nodes increased by increasing the concentration of sulfur, which is attributed to a shift from isolated µ 3 -OSO 3 H to two groups [(µ 3 -OSO 3 H) 2 ] interacting via hy-drogen bonding. For cyclohexanol dehydration, the relatively low activation enthalpies and negative transition entropies point to an E2 elimination mechanism, similar to dehydration with MFI zeolites in organic solvents. Furthermore, our results, show that the catalytic activity can be manipulated via the functionalization of zirconia nodes of the MOF framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Validation of the Cossee–Arlman mechanism for propylene oligomerization on Ni/UiO-66

Steady state rate expressions can be derived to distinguish the Cossee–Arlman and metallacycle mechanisms postulated for propylene oligomerization on nickel-based catalysts based on product selectivities, where product selectivities for the former are a function of olefin pressure because sequential coordination and insertion steps lead to independent mechanistic pathways for different hexene isomers. In contrast, the metallacycle mechanism presents pressure-independent product selectivities due to successive coordination prior to the kinetically relevant steps in each mechanism. In this work, steady state propylene oligomerization rates and selectivities were measured in the absence of an activator on nickel functionalized UiO-66 metal organic framework (MOF), Ni/UiO-66, to validate the Cossee–Arlman mechanism for light olefin oligomerization. In situ NO titrations reveal that ~5% of nickel sites were active during the reaction, and thus, not all nickel sites are relevant for catalysis. Propylene dimerization was first order in propylene pressure from 5 to 500 kPa with an apparent activation energy of ~20 kJ mol -1 from 453 to 493 K. Calculated apparent activation energies with density functional theory (DFT) calculations on cluster models of Ni/UiO-66 are in agreement with experiment to corroborate the Cossee–Arlman mechanism. Selectivities of hexene products and the ratio of hexene product selectivities on Ni/UiO-66 are in accordance with selectivity expressions derived from the Cossee–Arlman mechanism. In conclusion, analysis of product selectivities can be used more extensively to demarcate the Cossee–Arlman and metallacycle mechanisms for olefin oligomerization on metal-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Using earth abundant materials for long duration energy storage: electro-chemical and thermo-chemical cycling of bicarbonate/formate

Using hydrogen to store energy in chemical bonds is a key component of the global strategy to achieving a sustainable future and ameliorating climate change. The challenges associated with handling molecular hydrogen can be solved by using liquid hydrogen carriers. In this perspective, we discuss the concept of bicarbonate–formate cycle, where aqueous solutions of formate ions (HCO 2 – ) are used as hydrogen and energy carriers. Such solutions are composed by earth abundant elements and, in contrast to common liquid organic carriers, are non-flammable, and readily convert to the oxide forms (HCO 3 – ) under reaction with water to release hydrogen, or electrons, at moderate temperatures. We discuss thermodynamic aspects of the bicarbonate–formate cycle and show how it offers the opportunity of combining electrochemical and thermochemical operations, as well as of coupling CO 2 capture with energy/hydrogen storage. We emphasize the potential role of electrochemistry in the generation of formate and in the release of energy in the form of electricity. At present, more information on both the fundamental and systems level, is needed to identify the feasible scenarios for using formate/bicarbonate salts for hydrogen/energy storage. It is likely, however, that several strategies, including hybrid electrochemical–thermochemical approaches, will suit different applications. It is also clear that more integration between the disciplines of electrochemistry and heterogeneous catalysis is needed to overcome the challenges for advancing the HCO 3 – –HCO 2 – system as a feasible green alternative for storing and transporting energy.

08 HYDROGEN↗
DOE OSTI2023

Low-temperature upcycling of polyolefins into liquid alkanes via tandem cracking-alkylation

Selective upcycling of polyolefin waste has been hampered by the relatively high temperatures that are required to cleave the carbon-carbon (C–C) bonds at reasonably high rates. We present a distinctive approach that uses a highly ionic reaction environment to increase the polymer reactivity and lower the energy of ionic transition states. Combining endothermic cleavage of the polymer C–C bonds with exothermic alkylation reactions of the cracking products enables full conversion of polyethylene and polypropylene to liquid isoalkanes (C 6 to C 10 ) at temperatures below 100°C. Both reactions are catalyzed by a Lewis acidic species that is generated in a chloroaluminate ionic liquid. The alkylate product forms a separate phase and is easily separated from the reactant catalyst mixture. The process can convert unprocessed postconsumer items to high-quality liquid alkanes with high yields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes

Grafting metal cations to missing linker defect sites in zirconium-based metal–organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen–deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1–3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Furthermore, density functional theory calculations probing the Cossee–Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Ethanol–Ethyl Acetate System as a Biogenic Hydrogen Carrier

Liquid organic hydrogen carriers will likely be a key element of a future hydrogen economy by enabling the storage and transport of large quantities of hydrogen. Ethanol is a liquid organic hydrogen carrier that is readily available from biological resources, which undergoes a reversible reaction to yield hydrogen and ethyl acetate. The objective of the present study is to obtain a better understanding of the thermodynamic and environmental suitability of the ethanol–ethyl acetate cycle for hydrogen storage applications. The analysis covers three aspects: thermodynamics of the chemical reaction, energy balance of the process, and a first‐order assessment of greenhouse gas emissions. Thermodynamics of the reaction are characterized by a standard Gibbs energy of reaction close to zero which allows the reaction to be shifted between hydrogenation and dehydrogenation within a moderate window of temperature and pressure conditions. The energy demand for dehydrogenation is comparatively small, resulting in an overall system efficiency of 88%. A life cycle greenhouse gas analysis over a 20‐year storage system lifetime gives a carbon intensity of 7.0 kg‐CO 2eq /kg‐H 2 delivered. These results indicate that the ethanol–ethyl acetate system has considerable promise as a hydrogen carrier and should be the subject of further research.

08 HYDROGEN↗
DOE OSTI2022

Influence of the Molecular Structure on the Electrocatalytic Hydrogenation of Carbonyl Groups and H 2 Evolution on Pd

We investigated the electrocatalytic hydrogenation (ECH) of model aldehydes and ketones over carbon supported Pd in aqueous phase. We propose reaction mechanisms based on kinetic measurements and on spectroscopic and electrochemical characterization of the working catalyst. The reaction rates of ECH and of the H 2 evolution reaction (HER) vary with the applied electric potential following trends that strongly depend on the organic substrate. The intrinsic rates of hydrogenation and H 2 evolution are influenced, in opposing ways, by the sorption of the reacting organic substrate. Strong interactions, i.e., higher standard free energies of adsorption of the organic compound, induce high hydrogenation rates but decrease the overall currents. The fast hydrogenation kinetics produces a hydrogen-depleted environment that kinetically hinders the HER and the bulk phase transition of Pd to a H-rich bulk Pd hydride, which is triggered by the applied potential in the absence of reacting organic compounds. As consequence of strong organic-metal interactions, hydrogenation dominates at low overpotential. However, the coverages of organic substrates on the metal surface decrease and the rates of H 2 evolution surpass those of hydrogenation with increasingly negative electric potential. We determined the range of electric potential favoring hydrogenation on Pd and quantitatively deconvoluted the effects of the sorption of the organic compound, and of the rates of proton coupled electron transfers, on the kinetics of both ECH and HER. The results indicate that electrocatalysis offers hydrogenation pathways for polar molecules that are different and, in some cases, faster than those dominating in the absence of an external electric potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Controlling Reaction Routes in Noble‐Metal‐Catalyzed Conversion of Aryl Ethers

Abstract Hydrogenolysis and hydrolysis of aryl ethers in the liquid phase are important reactions for accessing functionalized cyclic compounds from renewable feedstocks. On supported noble metals, hydrogenolysis is initiated by a hydrogen addition to the aromatic ring followed by C−O bond cleavage. In water, hydrolysis and hydrogenolysis proceed by partial hydrogenation of the aromatic ring prior to water or hydrogen insertion. The mechanisms are common for the studied metals, but the selectivity to hydrogenolysis increases in the order Pd 2 pressure, thus, the selectivity to hydrogenolysis is maximized by increasing temperature and decreasing H 2 pressure. Selectivity to C−O bond cleavage reaches >95 % in water and alkaline conditions.

Schmid, Julian↗
DOE OSTI2022

Controlling Reaction Routes in Noble‐Metal‐Catalyzed Conversion of Aryl Ethers

Abstract Hydrogenolysis and hydrolysis of aryl ethers in the liquid phase are important reactions for accessing functionalized cyclic compounds from renewable feedstocks. On supported noble metals, hydrogenolysis is initiated by a hydrogen addition to the aromatic ring followed by C−O bond cleavage. In water, hydrolysis and hydrogenolysis proceed by partial hydrogenation of the aromatic ring prior to water or hydrogen insertion. The mechanisms are common for the studied metals, but the selectivity to hydrogenolysis increases in the order Pd 2 pressure, thus, the selectivity to hydrogenolysis is maximized by increasing temperature and decreasing H 2 pressure. Selectivity to C−O bond cleavage reaches >95 % in water and alkaline conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metal-organic framework supported single-site nickel catalysts for butene dimerization

Homotopic sites in a well-controlled environment are not only ideal systems for mechanistic studies, but also allow optimal control of catalytic transformations. Sites having only a single metal cation and sites consisting of metal oxo complexes with few nickel (Ni) cations supported on the nodes of UiO-66 metal-organic framework (Ni-UiO-66) are studied for 1-butene dimerization. Monomeric Ni sites, which bind to the Zr 6 node via two Zr-OH(µ3) linkages, are active and selective for the dimerization of 1-butene to linear and mono-branched C 8 isomers. Ni oxo complexes with few Ni cations show lower activity and promote the oligomerization of transiently formed C 8 isomers. In conclusion, Kohn-Sham density function theory calculations combined with spectroscopic measurements and kinetic analyses indicate that dimerization follows a Cossee-Arlman reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Disordered, Sub-Nanometer Ru Structures on CeO 2 are Highly Efficient and Selective Catalysts in Polymer Upcycling by Hydrogenolysis

We report non-degradable polyolefin plastics pose severe environmental threats, and thus demand efficient upcycling technologies. In this work, we discovered that low-loading (= 0.25 wt%) Ru/CeO 2 exhibits remarkable catalytic performance in the hydrogenolysis of polypropylene (PP), polyethylene (PE), and n-C 16 H 34 that is superior to high-loading (= 0.5 wt%) Ru/CeO 2 . They possess high PP conversion efficiency (7-fold increase over current literature reports), low selectivity towards undesired CH 4 , and good isomerization ability. In the low-loading range, the intrinsic activity of Ru in PP hydrogenolysis increases as the particle size decreases, opposite of the trend in the high-loading range. Detailed characterization revealed that the abrupt changes in catalytic behaviors coincide with Ru species transitioning from well-defined to highly disordered structures in the low-loading domain. The disordered Ru species were shown to be sub-nanometer in size and cationic. Mechanistically, the regioselectivity and the rate dependence on hydrogen pressure of C-C bond cleavage are different on low- and high-loading Ru/CeO 2 , both explained by the higher coverage of adsorbed hydrogen (*H) on low-loading Ru/CeO 2 . This work uncovers the remarkable catalytic performance of highly disordered, sub-nanometer, cationic Ru species in polyolefin hydrogenolysis, opening immense opportunities to develop effective, selective, and versatile catalysts for plastic upcycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Explaining the structure sensitivity of Pt and Rh for aqueous-phase hydrogenation of phenol

Phenol is an important model compound to understand the thermocatalytic (TCH) and electrocatalytic hydrogenation (ECH) of biomass to biofuels. Although Pt and Rh are among the most studied catalysts for aqueous-phase phenol hydrogenation, the reason why certain facets are active for ECH and TCH is not fully understood. Herein, we identify the active facet of Pt and Rh catalysts for aqueous-phase hydrogenation of phenol and explain the origin of the size-dependent activity trends of Pt and Rh nanoparticles. Phenol adsorption energies extracted on the active sites of Pt and Rh nanoparticles on carbon by fitting kinetic data show that the active sites adsorb phenol weakly. We predict that the turnover frequencies (TOFs) for the hydrogenation of phenol to cyclohexanone on Pt(111) and Rh(111) terraces are higher than those on (221) stepped facets based on density functional theory modeling and mean-field microkinetic simulations. The higher activities of the (111) terraces are due to lower activation energies and weaker phenol adsorption, preventing high coverages of phenol from inhibiting hydrogen adsorption. We measure that the TOF for ECH of phenol increases as the Rh nanoparticle diameter increases from 2 to 10 nm at 298 K and -0.1 V vs the reversible hydrogen electrode, qualitatively matching prior reports for Pt nanoparticles. The increase in experimental TOFs as Pt and Rh nanoparticle diameters increase is due to a larger fraction of terraces on larger particles. These findings clarify the structure sensitivity and active site of Pt and Rh for the hydrogenation of phenol and will inform the catalyst design for the hydrogenation of bio-oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Critical role of solvent-modulated hydrogen-binding strength in the catalytic hydrogenation of benzaldehyde on palladium

Protic and non-protic solvents influence the rate of benzaldehyde hydrogenation on Pd by one order of magnitude in the following sequence of increasing reactivity, dioxane < tetrahydrofuran < water < methanol. Despite these differences, the reaction pathway does not change; the majority of turnovers occurs via a Langmuir-Hinshelwood mechanism by stepwise addition of sorbed H to sorbed benzaldehyde, first to the carbonyl O and then to the C atom of the formyl group, forming benzyl alcohol. An analysis of the solvation energies shows that both ground and transition states are destabilized by the solvents compared to the same reaction at the gas-solid interface. The destabilization extent of the reacting organic substrates in both states are similar and, therefore, compensate each other, making the net kinetic effects inconsequential. In consequence, the marked reactivity differences arise solely from the differences in the surface stabilization of adsorbed hydrogen adatoms moderated by the four solvents-more weakly bound hydrogen adatoms, because of their solvation by solvent, exhibit higher rates of their hydrogenation reaction in kinetically relevant attack on the C atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗