Engineering topics
Publications and source records attributed to Gutierrez, Arturo.
A method for coating of lithium ion electrode materials via atomic layer deposition. The coated materials may be integrated in part as a dopant in the electrode itself via heat treatment forming a doped lithium electrode.
A lithium and manganese rich nickel-manganese-cobalt oxide (LMR-NMC) cathode is a promising candidate for next-generation batteries due to its high specific capacity, low cost, and low cobalt content. However, the material suffers from poor rate capability due to the diffusion limitations of lithium in the cathode particles. Understanding the material performance requires careful control of the morphology of the cathode particles, taking into account the primary and agglomerated diffusion pathways and the presence of pores, some of which could be closed from electrolyte infiltration. Here, in this study, we use a microstructure-based mathematical model combined with experimental data to understand the role of the complex cathode particle morphology in the rate performance of the material. Scanning electron microscopy images of cathodes made under different synthesis conditions, which results in different agglomerate morphologies, serve as the input into the mathematical model. The model is then compared to rate data to understand the controlling parameters. The presence of intra-agglomerate closed pores results in a large agglomerate diffusion length in comparison to the ideal condition, where the primary particles are agglomerated in an open and dispersed manner such that the entire interfacial area is available for electrochemical reaction. Smaller primary and agglomerate diffusion lengths result in better electrochemical performance. This points us toward designing the morphology of the cathode particles to compensate for the diffusion limitation of LMR-NMC while maximizing the density.
Historically, modifications to Li- and Mn-rich (LMR) cathodes have been studied in relation to their efficacy in solving challenges such as oxygen loss and voltage fade, which are inherent to the activation process of these electrodes. However, even in the presence of these phenomena, well-optimized LMR cathodes show considerable promise as earth-abundant options, particularly if other barriers to implementation can be overcome or mitigated. As the complex mechanisms of LMR electrodes are known to stem from the local, chemical inhomogeneities that define the nanocomposite domain nature of these oxides, strategies aimed at manipulating the performance of activated electrodes, irrespective of voltage fade, through domain-selective modifications, could prove instructive. In this work, we use a novel synthesis process aimed at influencing the site occupancy of substituted Sn 4+ , as an example 4+ cation, into a Co-free Li 1.13 Mn 0.57(1–x) Sn 0.57x Ni 0.3 O 2 LMR oxide. We show that Sn 4+ can be selectively substituted into Li-rich environments. The consequences are revealed to be both chemical and morphological, and the domain-selective doping strategy provides a knob for directed control of the low state-of-charge impedance behavior. In conclusion, these results reveal new clues and insights with respect to further advancing the practical relevance of LMR cathode particles and electrodes.
The performance and life of Li-ion battery cathode materials are determined by both the composition (crystal structure and transition metal ratio) and the morphology (particle size, size distribution, and surface area). Careful control of these two aspects is the key to long lasting, high-energy batteries that can undergo fast charge. Developing such cathodes requires manipulation of the synthesis conditions, namely the coprecipitation process to develop the precursor and a calcination step to lithiate and convert it to a transition metal oxide. In this paper, we utilize a combination of controlled synthesis, microscopic and spectroscopic characterization, and multi-scale mathematical modeling to shed light on the synthesis of cathode precursors. The complex interplay between the various chemical reactions in the co-precipitation process is studied to provide experimentalists with guidance on achieving composition control during synthesis. Further, the formation of a variety of morphologies of the primary particles and the driving force for agglomeration is mathematically described, for the first time, based on an energy minimization approach. Results suggest that the presence of Ni and/or Co significantly lowers the reaction rate constant compared to Mn, resulting in agglomerated growth in the former and single crystal growth in the latter. Modeling studies are used to provide a phase map describing the synthesis conditions needed to control the secondary particle size and corresponding size distribution. Finally, this paper represents an important step in developing a computationally guided approach to the synthesis of battery cathode materials.
This study delves into the synthesis and control of Ni x Mn 1–x CO 3 , a critical class of Mn-rich, Co-free precursors vital for cathode-oxide materials in energy storage and conversion technologies. Employing batch-mode coprecipitation, we systematically generated samples with varying Ni concentrations (x = 0, 0.1, 0.3, 0.5, 0.7, and 0.9) and conducted a comprehensive analysis of their compositions, crystallinities, transition-metal distributions, and particle morphologies through both experimental and computational methods. A significant variation in particle size and crystallinity was observed, contingent on the Ni content. Further, a pivotal transition emerged at Ni concentrations above x = ~0.5, transforming uniform morphologies, such as spherical, monodisperse, pseudo-single-crystalline particles, into bimodal, polycrystalline structures. Furthermore, the study highlights the role of Ni–ammonia complexes leading to Ni-deficient precipitates and underscores the importance of ammonia concentration in achieving precise Ni content control. This study unveils critical reaction conditions governing Mn-rich precursor properties that are vital for cathode-oxides, emphasizing the need for meticulous synthetic control and offering the potential for practical applications in advanced energy storage and conversion systems.
Compounds, powders, and cathode active materials that can be used in lithium ion batteries are described herein. Methods of making such compounds, powders, and cathode active materials are described.
We report the use of iron 1s3p resonant X-ray emission processes to conduct spin-selective, high-energy resolution fluorescence detected X-ray absorption near-edge spectroscopy (HERFD-XANES) on an iron-containing, lithium- and manganese-rich, fully earth-abundant cathode material, Li 1.3 Mn 0.5 Fe 0.2 O 2 (0.7Li 2 MnO 3 ·0.3LiFeO 2 ). Coupling this technique with conventional Mn K-edge XANES and detailed extended X-ray absorption fine structure (EXAFS) analysis from both the Mn and Fe vantage points, we gain fundamental insights into the redox processes and migration tendencies of transition metals in this cathode material at the bulk level. We show that during the first charge, Fe 3+ undergoes oxidation to form Fe 4+ prior to the activation plateau. Toward the end of activation, a significant fraction of the iron is present as tetrahedral Fe 3+ . This observation reveals that iron migration from octahedral to tetrahedral sites and iron reduction are initiated during activation. Upon first discharge from the activated state, a continuous and overlapping reduction of both Fe and Mn is observed, with Fe largely restored back as an octahedrally coordinated Fe 3+ . The manganese local environment gradually changes to a distorted cooperative Jahn–Teller Mn 3+ structure during discharge, with the clear presence of two Mn–O as well as two Mn–Mn correlation distances at 2.0 V. The significant reduction of manganese in the very first discharge is distinctly different from that seen in typical nickel-based lithium-manganese-rich materials but is similar to that observed for pure Li 2 MnO 3 . In conclusion, these findings shed light on key structure–property correlations in the cathode material and point to a causative relationship between the redox mechanisms as well as structural changes endured by the material and relatively poor performance during extended electrochemical cycling.