Engineering topics

Guy, Julien

Publications and source records attributed to Guy, Julien.

8 records

DOE OSTI2025

The effects of continuum fitting on Lyman-α forest correlations

Correlations of fluctuations of the flux in Lyman-α forests of high-redshift quasars have been observed by the Baryonic Acoustic Oscillation Spectroscopy Survey (BOSS) and the Dark Energy Spectroscopy Instrument (DESI) survey where they have revealed the effects of baryon acoustic oscillations (BAO). In order to fit the correlation functions to a physical model and thereby constrain cosmological parameters, it is necessary to take into account the effects of fitting the observed spectra to a template about which the fluctuations are measured. In this paper we use mock spectra to test the distortion matrix technique that has been used since the final BOSS data release to appropriately distort the models. We show that while percent-level effects on the derived forest bias parameters may be present, the technique works sufficiently well that the determination of the BAO peak position is not affected at the percent level. We introduce modifications in the technique used by DESI that were not in the original applications and suggest further possibilities for improvements.

Lyman alpha forest↗

DOE OSTI2025

Measuring σ 8 using DESI Legacy Imaging Surveys Emission-Line galaxies and Planck CMB lensing, and the impact of dust on parameter inference

Measuring the growth of structure is a powerful probe for studying the dark sector, especially in light of the σ 8 tension between primary CMB anisotropy and low-redshift surveys. This paper provides a new measurement of the amplitude of the matter power spectrum, σ 8 , using galaxy-galaxy and galaxy-CMB lensing power spectra of Dark Energy Spectroscopic Instrument Legacy Imaging Surveys Emission-Line Galaxies and the Planck 2018 CMB lensing map. We create an ELG catalog composed of 24 million galaxies and with a purity of 85%, covering a redshift range 0 < z < 3, with z mean = 1.09. We implement several novel systematic corrections, such as jointly modeling the contribution of imaging systematics and photometric redshift uncertainties to the covariance matrix. We also study the impacts of various dust maps on cosmological parameter inference. We measure the cross-power spectra over f sky = 0.25 with a signal-to-background ratio of up to 30σ. We find that the choice of dust maps to account for imaging systematics in estimating the ELG overdensity field has a significant impact on the final estimated values of σ 8 and Ω M , with far-infrared emission-based dust maps preferring σ 8 to be as low as 0.702 ± 0.030, and stellar-reddening-based dust maps preferring as high as 0.719 ± 0.030. The highest preferred value is at ∼ 3 σ tension with the Planck primary anisotropy results. These findings indicate a need for tomographic analyses at high redshifts and joint modeling of systematics.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Impact of systematic redshift errors on the cross-correlation of the Lyman-α forest with quasars at small scales using DESI Early Data

The Dark Energy Spectroscopic Instrument (DESI) will measure millions of quasar spectra by the end of its 5 year survey. Quasar redshift errors impact the shape of the Lyman-α forest correlation functions, which can affect cosmological analyses and therefore cosmological interpretations. Here, using data from the DESI Early Data Release and the first two months of the main survey, we measure the systematic redshift error from an offset in the cross-correlation of the Lyman-α forest with quasars. We find evidence for a redshift dependent bias causing redshifts to be underestimated with increasing redshift, stemming from improper modeling of the Lyman-α optical depth in the templates used for redshift estimation. New templates were derived for the DESI Year 1 quasar sample at z > 1.6 and we found the redshift dependent bias, Δr ∥ , increased from -1.94 ± 0.15 h -1 Mpc to -0.08 ± 0.04 h -1 Mpc (-205 ± 15 km s -1 to -9.0 ± 4.0 km s -1 ). These new templates will be used to provide redshifts for the DESI Year 1 quasar sample.

Lyman alpha forest↗

DOE OSTI2025

Validation of the DESI 2024 Lyα forest BAO analysis using synthetic datasets

The first year of data from the Dark Energy Spectroscopic Instrument (DESI) contains the largest set of Lyman-α (Lyα) forest spectra ever observed. This data, collected in the DESI Data Release 1 (DR1) sample, has been used to measure the Baryon Acoustic Oscillation (BAO) feature at redshift z = 2.33. In this work, we use a set of 150 synthetic realizations of DESI DR1 to validate the DESI 2024 Lyα forest BAO measurement presented in [1]. The synthetic data sets are based on Gaussian random fields using the log-normal approximation. We produce realistic synthetic DESI spectra that include all major contaminants affecting the Lyα forest. The synthetic data sets span a redshift range 1.8 < z < 3.8, and are analyzed using the same framework and pipeline used for the DESI 2024 Lyα forest BAO measurement. To measure BAO, we use both the Lyα auto-correlation and its cross-correlation with quasar positions. We use the mean of correlation functions from the set of DESI DR1 realizations to show that our model is able to recover unbiased measurements of the BAO position. We also fit each mock individually and study the population of BAO fits in order to validate BAO uncertainties and test our method for estimating the covariance matrix of the Lyα forest correlation functions. Finally, we discuss the implications of our results and identify the needs for the next generation of Lyα forest synthetic data sets, with the top priority being to simulate the effect of BAO broadening due to non-linear evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Multi-amplifier Sensing Charge-coupled Devices for Next Generation Spectroscopy

We present characterization results and performance of a prototype Multiple-Amplifier Sensing (MAS) silicon charge-coupled device (CCD) sensor with 16 channels potentially suitable for faint object astronomical spectroscopy and low-signal, photon-limited imaging. The MAS CCD is designed to reach sub-electron readout noise by repeatedly measuring charge through a line of amplifiers during the serial transfer shifts. Using synchronized readout electronics based on the Dark Energy Spectroscopic Instrument CCD controller, we report a read noise of 1.03 e$^{−}$ rms pix$^{−1}$ at a speed of 26 μs pix$^{−1}$ with a single-sample readout scheme where charge in a pixel is measured only once for each output stage. At these operating parameters, we find the amplifier-to-amplifier charge transfer efficiency (ACTE) to be >0.9995 at low counts for all amplifiers but one for which the ACTE is 0.997. This charge transfer efficiency falls above 50,000 electrons for the read-noise optimized voltage configuration we chose for the serial clocks and gates. The amplifier linearity across a broad dynamic range from ∼300 to 35,000 e$^{−}$ was also measured to be ±2.5%. We describe key operating parameters to optimize on these characteristics and describe the specific applications for which the MAS CCD may be a suitable detector candidate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

The 3D Lyman- α forest power spectrum from eBOSS DR16

We measure the three-dimensional power spectrum (P3D) of the transmitted flux in the Lyman-α (Ly α) forest using the complete extended Baryon Oscillation Spectroscopic Survey data release 16 (eBOSS DR16). This sample consists of ~205 000 quasar spectra in the redshift range 2 ≤ z ≤ 4 at an effective redshift z = 2.334. We propose a pair-count spectral estimator in configuration space, weighting each pair by exp( i k ∙ r), for wave vector k and pixel pair separation r, effectively measuring the anisotropic power spectrum without the need for fast Fourier transforms. This accounts for the window matrix in a tractable way, avoiding artefacts found in Fourier-transform based power spectrum estimators due to the sparse sampling transverse to the line of sight of Ly α skewers. We extensively test our pipeline on two sets of mocks: (i) idealized Gaussian random fields with a sparse sampling of Ly α skewers, and (ii) log-normal LyaCoLoRe mocks including realistic noise levels, the eBOSS survey geometry and contaminants. On eBOSS DR16 data, the Kaiser formula with a non-linear correction term obtained from hydrodynamic simulations yields a good fit to the power spectrum data in the range $(0.02 ≤ k ≤ 0.35)$ h Mpc -1 at the 1–2σ level with a covariance matrix derived from LyaCoLoRe mocks. We demonstrate a promising new approach for full-shape cosmological analyses of Ly α forest data from cosmological surveys such as eBOSS, the currently observing Dark Energy Spectroscopic Instrument and future surveys such as the Prime Focus Spectrograph, WEAVE-QSO, and 4MOST.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Readout optimization of multi-amplifier sensing charge-coupled devices for single-quantum measurement

The non-destructive readout capability of the Skipper Charge Coupled Device (CCD) has been demonstrated to reduce the noise limitation of conventional silicon devices to levels that allow single-photon or single-electron counting. The noise reduction is achieved by taking multiple measurements of the charge in each pixel. These multiple measurements come at the cost of extra readout time, which has been a limitation for the broader adoption of this technology in particle physics, quantum imaging, and astronomy applications. This work presents recent results of a novel sensor architecture that uses multiple non-destructive floating-gate amplifiers in series to achieve sub-electron readout noise in a thick, fully-depleted silicon detector to overcome the readout time overhead of the Skipper-CCD. This sensor is called the Multiple-Amplifier Sensing Charge-Coupled Device (MAS-CCD) can perform multiple independent charge measurements with each amplifier, and the measurements from multiple amplifiers can be combined to further reduce the readout noise. We will show results obtained for sensors with 8 and 16 amplifiers per readout stage in new readout operations modes to optimize its readout speed. The noise reduction capability of the new techniques will be demonstrated in terms of its ability to reduce the noise by combining the information from the different amplifiers, and to resolve signals in the order of a single photon per pixel. The first readout operation explored here avoids the extra readout time needed in the MAS-CCD to read a line of the sensor associated with the extra extent of the serial register. The second technique explore the capability of the MAS-CCD device to perform a region of interest readout increasing the number of multiple samples per amplifier in a targeted region of the active area of the device.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Archetype-based Redshift Estimation for the Dark Energy Spectroscopic Instrument Survey

We present a computationally efficient galaxy archetype-based redshift estimation and spectral classification method for the Dark Energy Survey Instrument (DESI) survey. The DESI survey currently relies on a redshift fitter and spectral classifier using a linear combination of principal component analysis–derived templates, which is very efficient in processing large volumes of DESI spectra within a short time frame. However, this method occasionally yields unphysical model fits for galaxies and fails to adequately absorb calibration errors that may still be occasionally visible in the reduced spectra. Our proposed approach improves upon this existing method by refitting the spectra with carefully generated physical galaxy archetypes combined with additional terms designed to absorb data reduction defects and provide more physical models to the DESI spectra. We test our method on an extensive data set derived from the survey validation (SV) and Year 1 (Y1) data of DESI. Our findings indicate that the new method delivers marginally better redshift success for SV tiles while reducing catastrophic redshift failure by 10%–30%. At the same time, results from millions of targets from the main survey show that our model has relatively higher redshift success and purity rates (0.5%–0.8% higher) for galaxy targets while having similar success for QSOs. These improvements also demonstrate that the main DESI redshift pipeline is generally robust. Additionally, it reduces the false-positive redshift estimation by 5%–40% for sky fibers. We also discuss the generic nature of our method and how it can be extended to other large spectroscopic surveys, along with possible future improvements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗