Search NASA⌕ Search

Engineering topics

Hackenberg, M

Publications and source records attributed to Hackenberg, M.

BF{sub 3} PIII modeling: Implantation, amorphisation and diffusion

In the race for highly doped ultra-shallow junctions (USJs) in complementary metal oxide semi-conductor (CMOS) technologies, plasma immersion ion implantation (PIII) is a promising alternative to traditional beamline implantation. Currently, no commercial technology computer aided design (TCAD) process simulator allows modeling the complete USJ fabrication process by PIII, including as-implanted dopant profiles, damage formation, dopant diffusion and activation. In this work, a full simulation of a p-type BF{sub 3} PIII USJ has been carried out. In order to investigate the various physical phenomena mentioned above, process conditions included a high energy/high dose case (10 kV, 5 Multiplication-Sign 10{sup 15} cm{sup -2}), specifically designed to increase damage formation, as well as more technology relevant implant conditions (0.5 kV) for comparison. All implanted samples were annealed at different temperatures and times. As implanted profiles for both boron and fluorine in BF{sub 3} implants were modeled and compared to Secondary Ion Mass Spectrometry (SIMS) measurements. Amorphous/crystalline (a/c) interface depths were measured by transmission electron microscopy (TEM) and successfully simulated. Diffused profiles simulations agreed with SIMS data at low thermal budgets. A boron peak behind the a/c interface was observed in all annealed SIMS profiles for the 10 kV case, indicating boron trapping from EOR defects in this region even after high thermal budgets. TEM measurements on the annealed samples showed an end of range (EOR) defects survival behind the a/c interface, including large dislocation loops (DLs) lying on (001) plane parallel to the surface. In the last part of this work, activation simulations were compared to Hall measurements and confirmed the need to develop a (001) large BICs model.

36 MATERIALS SCIENCE↗

Modeling boron profiles in silicon after pulsed excimer laser annealing

In this work, we investigated four possible mechanisms which were candidates to explain the shape of boron profiles after ion implantation and melting excimer laser annealing in silicon. A laser with a wavelength of 308 nm and a pulse duration of {approx}180 ns was used. To simulate this process, an existing model for the temperature and phase evolution was complemented with equations for the migration of dopants. Outdiffusion, thermodiffusion, segregation, and adsorption were investigated as possible mechanisms. As a result, we found that outdiffusion and segregation can be excluded as major mechanisms. Thermodiffusion as well as adsorption could both reproduce the build-up at low melt depths, but only adsorption the one at deeper melt depths. In both cases, ion beam mixing during SIMS measurement had to be taken into account to reproduce the measured profiles.

36 MATERIALS SCIENCE↗