Search NASA⌕ Search

Engineering topics

Haefeli, Rudolph C

Publications and source records attributed to Haefeli, Rudolph C.

10 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1953

Investigation of Pressure Recovery of a Single-conical-shock Nose Inlet at Mach Number 5.4

An experimental investigation of the performance of a single-conical-shock diffuser was conducted at a Mach number of 5.4 and a Reynolds number based on model diameter of 375,000. Total-pressure recoveries of 13.7 and 13.1 percent were obtained at angles of attack of 0 degrees and 3 degrees, respectively. The corresponding kinetic energy efficiencies were 86.4 percent at an angle of attack of 0 degrees and 86.0 percent at an angle of attack of 3 degrees.

DIFFUSERS, SUPERSONIC↗
NASA NTRS1950

Downwash in Vortex Region Behind Rectangular Half-wing at Mach Number 1.91

Results of an experimental investigation to determine downwash and wake characteristics in region of trailing vortex system behind a rectangular half-wing at Mach number 1.91 are presented. The wing had a 5-percent thick symmetric diamond cross section beveled to a knife edge at the tip. At small angles of attack, downwash angles were in close agreement with predictions of linearized theory based on the assumption of an undistorted vortex sheet. At higher angles of attack, the flow was greatly influenced by the rolling up of the vortex sheet.

Cummings, John L↗
NASA NTRS1950

Line-vortex theory for calculation of supersonic downwash

The perturbation field induced by a line vortex in a supersonic stream and the downwash behind a supersonic lifting surface are examined to establish approximate methods for determining the downwash behind supersonic wings. Lifting-lines methods are presented for calculating supersonic downwash. A bent lifting-line method is proposed for computing the downwash field behind swept wings. When applied to triangular wings with subsonic leading edges, this method gives results that, in general, are in good agreement with the exact linearized solution. An unbent lifting-line method (horseshoe-vortex system) is proposed for unswept wings. This method is applied to determine downwash behind rectangular wings with aspect ratios of 2 and 4. Excellent agreement with exact linearized theory is obtained for both aspect ratios by placing the lifting line at the 1/2-chord point. The use of lifting-lines therefore appears promising for obtaining estimates of the downwash behind supersonic wings.

Mirels, Harold↗