Search NASA⌕ Search

Engineering topics

Haefner, Matthew

Publications and source records attributed to Haefner, Matthew.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Experiments and numerical modeling of surrogate droplet combustion for a 93 octane gasoline calibration fuel

Gasoline is the world’s most prolific liquid transportation fuel for ground transportation vehicles. Yet, a fundamental understanding of its burning characteristics is still lacking. Complicating this matter is the highly multicomponent nature of gasoline (comprised of hundreds of chemical species) and the seasonable variability of its composition due to variations in the crude oil feedstocks used in refining. The need to bring order to this complex problem has led to development of calibration fuels (Tier II in presented study) which on average will provide repeatable metrics that replicate performance of refined gasoline for various engine designs. This study presents results of experiments using the configuration of an isolated droplet to study the combustion dynamics of calibration fuel and three different surrogates (S4, S5, S6) for the calibration fuel. Droplet burning is under microgravity conditions, where gas transport is determined entirely by fuel evaporation in order to promote spherical symmetry in the burning process. The initial droplet diameters ranged between 0.55 mm and 0.60 mm. The droplets were spark-ignited and their burning histories were recorded by digital video cameras to obtain quantitative data. For each fuel, the evolutions of droplet, flame, and soot-shell diameters were measured to calculate the burn rates, flame-droplet diameter ratios (FSR) and soot-droplet diameter ratios. Additionally, a detailed numerical modeling is presented. This simulation includes multicomponent phase equilibrium, unsteady gas and liquid transport, radiative heat transfer, internal liquid diffusion and detailed combustion chemistry of different fuels during their burning process. Experiment results show that the calibration fuel and surrogates have a close burn rates and FSR, and S5 presents a relatively similar results with calibration fuel. Predictions from the numerical simulation using the surrogate are compared with experiment measurements, which showed a good agreement with the experiment results, including the droplet burning rate and FSR.

Guo, Songtao↗
DOE OSTI2021

Combustion studies of n-butyl acetate synthesized by a new biological process and comparisons with neat n-butyl acetate

Blending petroleum fuels with biofuels is a common approach for stemming the depletion of crude oil while also mitigating the impact of their combustion on the environment. It has recently been considered that n-butyl acetate (BA, C6H12O2, boiling point of 399K) could be a viable biofuel additive to diesel fuel. This paper reports the combustion dynamics of BA droplets in the absence of external convection. Two grades of BA were examined: one synthesized by a new process that uses a solventogenic Clostridium strain through an extractive fermentation process using n-hexadecane as the extractant (SBA); the other commercially available as a high-purity (99.9%) 'neat' BA grade produced by Fischer esterification (NBA). The mass concentration of by-products from the synthesis process amounted to approximately 6% of the total composition and included n-butanol, n-hexadecane, iso-propyl alcohol and ethyl acetate. The platform used to study the combustion of commercial and synthesized BA was an isolated droplet burning with spherical symmetry. Initial droplet diameters were fixed at 0.6 mm. Experiments were carried out in a drop tower to promote one-dimensional transport dynamics, in the standard atmosphere, and with ignition accomplished by spark discharge. Differences in droplet burning rates and flame structures were undetectable between NBA and SBA, despite the differences in burning among the SBA components individually. The results presented show that the new synthesis process for butyl acetate yields a sustainable alternative to conventional methodologies with burning characteristics that are identical to NBA in stagnant gas transport fields.

Wang, Yujie↗
DOE OSTI2020

Combustion of Butyl acetate as an alternative additive to petroleum fuels

Blending petroleum fuels with oxygenates is a common approach to stem the depletion of crude oil while also mitigating the impact of their combustion on the environment. It has recently been considered that butyl acetate (BA, C6H12O2 , boiling point of 399K) could be a viable oxygenate additive to diesel fuel. The platform used to study combustion of commercial and synthesized BA was an isolated droplet burning with spherical symmetry. The experiments were carried out in a drop tower to minimize buoyant convection. Restricting motion by supporting droplets on 14 micrometer fibers eliminated forced convection. Precise control of the initial diameter was achieved by first deploying large droplets and letting them evaporate to the size of interest, here being between 0.3 mm to 0.8 mm. The experimental results show that commercial and the newly synthesized BA burned almost identically for the evolution of droplet and flame diameters. Droplets burned slower as the initial diameter was increased and soot formation was noted for the larger sizes studied due to a residence size effect. Burning in a buoyant convective field showed higher burn rates due to the convective effect and that the asymmetric flames became nearly spherical as diameter decreased. The study illustrates the significant value that the microgravity environment brings to evaluating performance of oxygenated fuels synthesized by new production methods.

Wang, Yujie↗