Engineering topics

Hagerman, George

Publications and source records attributed to Hagerman, George.

4 records

DOE OSTI2024

IEA Wind Task 49: Reference Site Conditions for Floating Wind Arrays

The commercial-scale deployment of floating offshore wind (FOW) projects is expected to take place in a diverse range of sites that may differ significantly from existing fixed-bottom projects. FOW farms are particularly sensitive to the water depth and the meteorological and oceanographic (metocean) and geotechnical conditions at the project site due to the wave-induced system motions and loads as well as the anchoring system constraints imposed by the seafloor conditions. Uncertainty around the site conditions will permeate through all aspects of project design, leading to suboptimal and overly conservative designs, increased costs, and adversely affected performance. As FOW expands into a global industry, metocean and geotechnical conditions will increasingly vary for projects located in different geographic regions or in far-from-shore, deep-water sites. This study represents the outputs of work package 1 of International Energy Agency Wind Task 49, which focuses on the integrated design of floating wind arrays. The primary goal of this study is to establish the type of parameters and constraints required to characterize FOW array reference sites; provide a realistic and publicly available set of reference site conditions to the FOW community as a baseline set of data for individual research projects; identify and categorize any critical gaps in the existing data or methodologies required to define reference site characteristics; and inform and support the design of reference FOW arrays. A building block concept was developed for synthesizing reference sites for the design of FOW arrays. The building blocks include three classes of site conditions focusing on the techno-economic design of FOW projects: metocean conditions, seabed conditions, and coastal infrastructure. All reference site data produced and collected in this study are publicly available.

17 WIND ENERGY↗

DOE OSTI2024

IEA Wind TCP Task 49: Reference Site Conditions for Floating Wind Arrays

This report, prepared within Work package 1 of IEA Wind Task 49, presents reference site conditions for floating wind arrays to serve as a design basis for the techno-economic design of reference floating wind arrays. Data of the reference sites presented here are publicly available in an open database and thus support fast development and comparable design of floating wind arrays for various relevant conditions. The development of these reference sites drew on existing open access datasets and ongoing research projects of task participants. Six classes were identified that describe relevant key conditions for the design and development of floating wind arrays: met-ocean conditions, seabed conditions, coastal infrastructure, environmental impact, socio-economic impact, as well as regulations and permissions. The reference sites for the techno-economic design of floating wind arrays are based on a concept with building blocks to synthesize purpose-built site representations. In each of the identified classes with influencing design factors, building blocks are used to describe the characteristic properties and their spread. However, the latter three classes (i.e., environmental impact, socio-economic impact, regulations and permissions) are not included in the reference site conditions due to limited knowledge and lack of reliable criteria to quantify their impact on the techno-economic design in numeric parameters. Building blocks with key parameters for the techno-economic design of floating wind arrays are provided for met-ocean conditions, seabed conditions, and coastal infrastructure. For met-ocean conditions, multiple sites were selected for detailed analysis that represent a range of conditions across the pipeline of floating wind projects. Wind conditions and sea states are separated, and each location considers both the severity of wind and waves e.g. one site may have a moderate wave condition but severe wind condition. From this pipeline, eleven representative sites were selected where both site-specific analysis was available within the consortium, and where they represent different parts of the global pipeline. The eleven sites are: Hannibal (Italy), Humboldt (US), Ulsan (South Korea), MoneyPoint One (Ireland), Havbredey (UK), Fukushima (Japan), Utsira Nord (Norway), Gulf of Maine (US), Sud de la Bretagne II (France), Sorlige Nordsjo II (Norway). Each of these sites is summarized in the main report while more details about the studies and analyses behind the datasets are provided in the appendix. For seabed conditions, general information about the geotechnical parameters is provided and a baseline is established for the geotechnical parameters and stratigraphy that may be encountered on the sites. A set of six 'synthetic cases' is defined as building blocks providing the different parameters required for design under each case/soil condition. For the coastal infrastructure, general information about the main requirements is provided that a port should comply with to provide a satisfactory service during the construction of floating offshore wind arrays. Minimum port infrastructural requirements are provided for three types of ports.

17 WIND ENERGY↗

DOE OSTI2024

Challenges and Opportunities for Floating Offshore Wind Energy in Ultradeep Waters of the Central Atlantic

This study, funded under an interagency agreement between the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) and Bureau of Ocean Energy Management (BOEM), is intended to provide BOEM with key information to inform their decision making about current and future leasing in the Central Atlantic region of the United States. The report will also benefit state governments, developers, research institutions, and the public which are seeking technical and market-based information about the unique aspects of the offshore wind energy development along the outer continental shelf of the Central Atlantic region of the United States. The study provides a broad top-level assessment of the key challenges and opportunities that are unique to offshore wind energy development in the Central Atlantic region. It focuses on BOEM's Central-Atlantic region Call areas. The research is based on the most current technology, deployment, and stakeholder information available to NREL. The topics include assessments of the physical environment, current leasing status and major stakeholder issues, state and federal energy policy, an assessment of future leasing requirements based on state targets, status and limitations of the technology, and supply chain status. The primary intent is to inform the readers about the prospects for deploying offshore wind in the designated deep water Call areas, E and F, identified by BOEM. The report makes recommendations regarding development in these regions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2023

WAVES (Wind Asset Value Estimation System) [SWR-23-81]

The Wind Asset Value Estimation System (WAVES) model is a coupling framework for core NREL techno economic analysis software models to estimate capital expenditures (ORBIT), operational expenditures (WOMBAT), and energy production (FLORIS) for offshore wind power plants. Existing workflows to couple the three models for lifecycle performance and cost estimation require a large amount of manual and error-prone setup to combine both shared inputs and dependent outputs, as such WAVES's primary functionality is to wrap the core logic for running standard modeling workflows to ensure shared settings and entangled results are correctly and efficiently combined every time. SEE ALSO: https://pypi.org/project/WAVES/

Hammond, Robert↗