Engineering topics
Hakel, Peter
Publications and source records attributed to Hakel, Peter.
FY2024 Q4 L2 Milestone 8237 for Opacity-on-NIF
This document addresses parts 2 and 3 of the original milestone request. In the following writeup, the development of OpSpecTR at LLNL by LLNL and NNSS personnel will be detailed first, followed by a write-up of the development of Vme-resolved simulaVons of the opacity-on-NIF experiment. Capsule backlight simulaVons, hohlraum simulaVons, and sample simulaVons from CASSIO are combined to produce the line of sight from the capsule to an effecVve OpSpec posiVon. Spectra are generated by post-processing these simulaVons from either Spect3D, a commercial software by Prism ComputaVonal Sciences, or FESTR (Finite Element Spectroscopic Transport of RadiaVon), a LANL code. While the simulaVons do not at this stage proceed late enough to include the worst of the backgrounds generated from the hohlraum experimentally and each post-processing simulaVon includes only one ray for each spectrometer channel, these efforts represent proof of concept for a new capability to complete Vme-resolved and Vmegated simulaVons for the complete line of sight of the complex opacity-on-NIF geometry. Future work will be discussed at the end of the report for both efforts.
In-depth analysis of solar models with high-metallicity abundances and updated opacity tables
Context. As a result of the high-quality constraints available for the Sun, we are able to carry out detailed combined analyses using neutrino, spectroscopic, and helioseismic observations. These studies lay the ground for future improvements of the key physical components of solar and stellar models because ingredients such as the equation of state, the radiative opacities, or the prescriptions for macroscopic transport processes of chemicals are then used to study other stars in the Universe. Aims. We study the existing degeneracies in solar models using the recent high-metallicity spectroscopic abundances by comparing them to helioseismic and neutrino data and discuss the effect on their properties of changes in the micro and macro physical ingredients. Methods. We carried out a detailed study of solar models computed with a high-metallicity composition from the literature based on averaged 3D models that were claimed to resolve the solar modelling problem. We compared these models to helioseismic and neutrino constraints. Results. The properties of the solar models are significantly affected by the use of the recent OPLIB opacity tables and the inclusion of macroscopic transport. The properties of the standard solar models computed using the OPAL opacities are similar to those for which the OP opacities were used. We show that a modification of the temperature gradient just below the base of the convective zone is required to remove the discrepancies in solar models, particularly in the presence of macroscopic mixing. This can be simulated by a localised increase in the opacity of a few percent. Conclusions. We conclude that the existing degeneracies and issues in solar modelling are not removed by using an increase in the solar metallicity, in contradiction to what has been suggested in the recent literature. Therefore, standard solar models cannot be used as an argument for a high-metallicity composition. While further work is required to improve solar models, we note that direct helioseismic inversions indicate a low metallicity in the convective envelope, in agreement with spectroscopic analyses based on full 3D models.
Target Design for XFEL Experiments
High-energy-density (HED) experiments utilizing X-ray free electron lasers (XFELs) must take a different approach to fielding these experiments than the current methodology used for the large HED facilities in the United States. The XFELs and their associated laser drivers have a much faster repetition rate than do the larger facilities. Experiments must be designed to execute hundreds rather than a few shots per experimental run. The new paradigm requires a different approach to data collection and analysis. It also requires an integrated approach to experiment and target design. Here, in this study, we developed new target designs for a future XFEL experiment that meet both experiment and cost goals.
Enabling High-Energy-Density Physics Using X-Ray Free Electron Lasers
New High-Energy-Density (HED) Physics research facilities, such as x-ray free electron lasers (XFEL) are becoming available to the research community. These new tools can be used to address stockpile stewardship science questions in the HED regime with greater accuracy and in parameter ranges not previously accessible. Two important challenges that must be overcome before using the XFEL are developing simulation tools needed to design the experiment and developing large quantities of inexpensive targets from which the HED state is created. We developed two-dimensional simulations in a new geometry (planar) to determine basic plasma parameters that could be expected in a notional experiment. We developed a postprocessor that used the results of the simulations to predict the x-ray Thomson scattering (XRTS) signal that yield the plasma density and pressure at a specified location and time. Finally, we developed several possible target geometries that are inexpensive and easy to use. With these tools in hand, the risk in designing an experiment for an XFEL is significantly reduced.
A temperature profile diagnostic for radiation waves on OMEGA-60
Predicting and matching radiation wave propagation with computational models has proven difficult. Information provided by experiments studying radiation flow has been limited when only radiation breakout is measured. We have developed the COAX (co-axial) diagnostic platform to provide spatial temperature profiles of a radiation wave through low density foams as a more detailed constraint for simulations. COAX uses a standard, laser-driven OMEGA-60 halfraum to drive radiation down a titanium-laden silicon oxide foam. Point-projection X-ray absorption spectroscopy perpendicular to the radiation flow measures the spatial profile of titanium ionization. The spectroscopic measurement utilizes a broadband capsule backlighter. Imaging and streak spectroscopy are used to characterize the size and spectrum of this source. Radiography provides an additional constraint by capturing the developing shock as the radiation flow becomes subsonic. The DANTE diagnostic is used to measure the halfraum temperature. Here, we provide a spectroscopic analysis of COAX data to determine temperature, and we describe experimental sources of uncertainty. The temperature is obtained by comparison to multi-temperature synthetic spectra post-processed from radiation-hydrodynamics simulations. Quantitative comparison between data and synthetic spectra generated from temperature profiles at relevant simulation times enable determination of a peak temperature of 114 ± 8 eV at 265 ± 22.4 μm from the halfraum. This represents an improvement over the temperature uncertainties of previous radiation flow experiments. Further refinements to the spectroscopic analysis could achieve ±4 eV. The combination between space-resolved spectroscopy and radiography enables us to determine the distance from the halfraum of both the radiation front and the shock front at the time of measurement. For the example shown in this paper the radiation front position is 600–630 μm at 3.43 ± 0.16 ns and the shock front position is 633 μm at 3.3 ± 0.24 ns.
Sodium tracer measurements of an expanded dense aluminum plasma from e-beam isochoric heating
Spatially and temporally resolved visible absorption spectroscopy is performed on sodium D-lines present as surface contaminants on an expanded dense aluminum plasma plume. An 80-ns FWHM, intense, relativistic electron beam deposits 5.4 J into a 100- μ m-thick Al foil, which isochorically heats and subsequently hydrodynamically expands the material through the warm dense matter state and into a classical-like plasma state, with a coupling parameter of approximately 0.2 and a degeneracy parameter of approximately 270. The Na contamination, carried along with the expanding plume, shows saturated absorption features in the dense Al continuum for λ > 450 nm. X-ray photoelectron spectroscopy and laser-induced breakdown spectroscopy confirm Na is a surface contaminant with an atomic concentration of ~ 0.1 % when interrogating identical foil samples. Additioanlly, a spectroscopic-quality radiation transport model is used to post-process 2D hydrodynamic simulations to interpret the plasma conditions based on the measured Na 3p-3s doublet line profiles. A sodium number density of 3 × 10 15 cm -3 best matches the experimental spectra, which originate from a dense surface plasma with n e = 3.0 ± 0.8 × 10 18 cm -3 .
Laser-driven production of the antihydrogen molecular ion
The feasibility of producing the molecular antihydrogen anion H 2 – in the laboratory is investigated here. Utilizing reaction rates calculated here involving the interaction of laser excited-state antihydrogen atoms held in magnetic minimum traps, key processes are identified that could lead to anion production, as well as competing effects leading to anti-atom loss. These are discussed in the context of present-day and near-future experimental capabilities.
Design-by-contract and test-driven software development [Slides]
Abstract not provided.
Progress on observations of interspecies ion separation in inertial-confinement-fusion implosions via imaging x-ray spectroscopy
We report on the analyses of x-ray-imaging spectroscopy data from experiments to study interspecies ion separation in direct-drive inertial-confinement-fusion experiments on the Omega laser facility. This is a continuation of recent, related research [S. C. Hsu et al., Euro Phys. Lett. 115, 65001 (2016); T. R. Joshi et al., Phys. Plasmas 24, 056305 (2017)]. The targets were argon (Ar)-doped, deuterium (D2)-filled spherical plastic shells of varying D2-Ar relative and total gas pressures. We used a time- and space-integrated spectrometer, streaked crystal spectrometer, and up to three time-gated multi-monochromatic x-ray imagers (MMIs) fielded along different lines of sight to record x-ray spectral features obtained from the implosions. The MMI data were recorded between first-shock convergence and slightly before the neutron bang time. We confirm the presence of interspecies ion separation as reported in our recent work. Extensions to the previous work include (a) the inclusion of shell mix in the data analysis, which slightly changes the amount of inferred species separation, (b) observation of species separation closer to the neutron bang time, and (c) fielding of the particle x-ray temporal diagnostic (PXTD) [H. Sio et al., Rev. Sci. Instrum. 87, 11D701 (2016)] to infer the relative timing between the neutron bang time and peak x-ray emission. Experimentally inferred species separation is compared with radiation-hydrodynamic simulations that include a multi-ion-species transport model.
FESTR: Finite-Element Spectral Transfer of Radiation spectroscopic modeling and analysis code (New Version Announcement)
We report on the release of a new version of the FESTR (P. Hakel, Comput. Phys. Commun. 207 (2016) 415–425., https://github.com/LANLhakel/FESTR) spectral postprocessor of hydrodynamic simulations of hot, dense plasmas. Based on given time histories of one-, two-, and three-dimensional spatial distributions of materials, and their local temperature and density conditions, spectroscopically-resolved signals are computed. The effects of radiation emission and absorption by the plasma on the emergent spectra are simultaneously taken into account. Furthermore this program can also be used independently of hydrodynamic calculations to analyze available experimental data with the goal of inferring plasma conditions.
Opacity: A window into High Energy Density Plasma Physics
Opacity is a fundamental property of matter and knowledge of it is required to understand the transport of radiation through a material. Exact knowledge of opacity is crucial in many fields such as astrophysics, which recently produced a white paper on the current state of astrophysical opacities [1], plasma physics, including inertial confinement fusion (ICF) and magnetic confinement fusion, high energy density physics (HEDP), the semiconductor industry [2] and stockpile stewardship. In industry, the accurate knowledge of the opacity of tin is important for extreme ultraviolet (EUV) lithography and the development of processors with smaller components. In astrophysics, Cepheid variable stars are used as “standard candles” for determining the distance to objects. Opacities of these stars are required to understand the relationship between their periodicity, luminosity and distance. Our sun is the most studied star and provides the basis of our understanding for other stars. Yet in significant ways the sun is poorly understood. In recent years, there has been a debate over the abundances of heavy elements (Z > 2) in the solar interior. Current solar atmosphere models [3] find a significantly lower abundance for C, N, and O compared to models used roughly a decade ago. Although solar evolution models have matured, a discrepancy still exists between spectroscopic solar models (which require opacities) with updated abundances, and solar properties inferred from helioseismology and neutrinos [4]. Despite its necessity, opacity is not solved, and is an open and active area of research needed for improving our understanding of plasma physics.
New Los Alamos Opacity Calculations
In 2015 Los Alamos National Laboratory (LANL) released a new set of OPLIB opacity tables for the elements hydrogen through zinc. The new LANL opacities are publicly available via our website and are already in use by the astrophysics community. In this contribution, we discuss the extension of our opacity calculations to elements beyond zinc. Such calculations are motivated by potential industrial applications (for elements such as Sn) as well as available experimental data with which to compare our calculations (for Ge and Br). After a short outline of our method for computing opacities for these elements, we make comparisons to available experimental data and find good agreement. Future plans are briefly discussed.