Search NASA⌕ Search

Engineering topics

Hamel, Sebastien

Publications and source records attributed to Hamel, Sebastien.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

FOS: Physical sciences↗
DOE OSTI2024

Response of fs-Laser-Irradiated Diamond by Ultrafast Electron Diffraction

Structural details of the proposed solid–liquid phase transition of carbon have remained elusive, despite years of study. While it is theorized that novel carbon materials form from a liquid precursor, experimental studies have lacked the temporal and spatial resolution necessary to fully characterize the purported liquid state. Here, in this work, we utilize megaelectronvolt-ultrafast electron diffraction (MeV-UED) to study laser irradiated submicron diamond thin films in a pump–probe scheme with picosecond time resolution to visualize potential structural changes of excited diamond. We probe the structure of diamond using a combination of fluences (13, 40 J/cm 2 ) and time delays (10, 25, 100 ps), but observe negligible changes in the static diffraction pattern of diamond and an overall decrease in diffraction intensity up to 100 ps after the excitation pulse. We thus conclude that no appreciable amount of liquid or graphitized carbon is present and highlight the structural resilience of bulk diamond to intense 800 nm ultrafast laser pulses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Interpretable, extensible linear and symbolic regression models for charge density prediction using a hierarchy of many-body correlation descriptors

Here, density functional theory (DFT) is routinely used to make electronic structure predictions for high-throughput screening of materials and molecules for technologically relevant areas, like the identification of better catalysts, electronic materials, and drug discovery. However, the DFT formalism is limited by (a) its poor (quadratic-to-quartic) scaling, and (b) the need to perform repeated eigenvalue computations of the electronic Hamiltonian as part of its self-consistent field (SCF) iteration procedure to obtain the converged ground state electron density, ρ (r). Approaches that directly predict ρ (r) of a structure with high accuracy can accelerate conventional SCF calculations and can also be used in linearly scaling methods such as orbital-free DFT. To this end, we present a procedure to predict the ground state electron density of molecular and periodic three-dimensional systems directly from the atomic structure with a particular emphasis on physical interpretability. In our framework, ρ (r) is modeled using many-body correlation descriptors that accurately capture the effects of local atomic arrangements in the neighborhood of a grid point. Our use of a linear regression scheme to fit to charge density data enables transparent analysis of the relative contributions of various types of local atomic correlations. By systematically including increasingly complex correlations, our model is shown to accurately predict ρ (r) for a variety of chemically and electronically diverse systems — amorphous Ge, Al(001) slab, crystalline Ga 2 O 3 , molecular benzene, and polyethylene. We then demonstrate a symbolic regression-based protocol to construct easily computable, interpretable features from lower-order correlations that significantly improves our electron density predictions with effectively no increase in the computational cost.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Accuracy, transferability, and computational efficiency of interatomic potentials for simulations of carbon under extreme conditions

Large-scale atomistic molecular dynamics (MD) simulations provide an exceptional opportunity to advance the fundamental understanding of carbon under extreme conditions of high pressures and temperatures. However, the fidelity of these simulations depends heavily on the accuracy of classical interatomic potentials governing the dynamics of many-atom systems. Here, this study critically assesses several popular empirical potentials for carbon, as well as machine learning interatomic potentials (MLIPs), in their ability to simulate a range of physical properties at high pressures and temperatures, including the diamond equation of state, its melting line, shock Hugoniot, uniaxial compressions, and the structure of liquid carbon. Empirical potentials fail to accurately predict the behavior of carbon under high pressure–temperature conditions. In contrast, MLIPs demonstrate quantum accuracy, with Spectral Neighbor Analysis Potential (SNAP) and atomic cluster expansion (ACE) being the most accurate in reproducing the density functional theory results. ACE displays remarkable transferability despite not being specifically trained for extreme conditions. Furthermore, ACE and SNAP exhibit superior computational performance on graphics processing unit-based systems in billion atom MD simulations, with SNAP emerging as the fastest. In addition to offering practical guidance in selecting an interatomic potential with a fine balance of accuracy, transferability, and computational efficiency, this work also highlights transformative opportunities for groundbreaking scientific discoveries facilitated by quantum-accurate MD simulations with MLIPs on emerging exascale supercomputers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ice Phase Classification Made Easy with Score-Based Denoising

Accurate identification of ice phases is essential for understanding various physicochemical phenomena. However, such classification for structures simulated with molecular dynamics is complicated by the complex symmetries of ice polymorphs and thermal fluctuations. For this purpose, both traditional order parameters and data-driven machine learning approaches have been employed, but they often rely on expert intuition, specific geometric information, or large training data sets. In this work, we present an unsupervised phase classification framework that combines a score-based denoiser model with a subsequent model-free classification method to accurately identify ice phases. Further, the denoiser model is trained on perturbed synthetic data of ideal reference structures, eliminating the need for large data sets and labeling efforts. The classification step utilizes the smooth overlap of atomic position (SOAP) descriptors as the atomic fingerprint, ensuring Euclidean symmetries and transferability to various structural systems. Our approach achieves a remarkable 100% accuracy in distinguishing ice phases of test trajectories using only seven ideal reference structures of ice phases as model inputs. This demonstrates the generalizability of the score-based denoiser model in facilitating phase identification for complex molecular systems. The proposed classification strategy can be broadly applied to investigate structural evolution and phase identification for a wide range of materials, offering new insights into the fundamental understanding of water and other complex systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Time-Resolved X-ray Emission Spectroscopy and Resonant Inelastic X-ray Scattering Spectroscopy of Laser Irradiated Carbon

The existence of liquid carbon as an intermediate phase preceding the formation of novel carbon materials has been a point of contention for several decades. Experimental observation of such a liquid state requires nonthermal melting of solid carbon materials at various laser fluences and pulse properties. Reflectivity experiments performed in the mid-1980s reached opposing conclusions regarding the metallic or insulating properties of the purported liquid state. Time-resolved X-ray absorption studies showed shortening of C–C bonds and increasing diffraction densities, thought to evidence a liquid or glassy carbon state, respectively. Nevertheless, none of these experiments provided information on the electronic structure of the proposed liquid state. Herein, we report the results of time-resolved resonant inelastic X-ray scattering (RIXS) and time-resolved X-ray emission spectroscopy (XES) studies on amorphous carbon (a-C) and ultrananocrystalline diamond (UNCD) as a function of delay time between the irradiating pulse and X-ray probe. For both a-C and UNCD, we attribute decreases in RIXS or XES signals to transition blocking, relaxation, and finally, ablation. Increased signal at 20 ps following the irradiation of the UNCD is attributed to the probable formation of nanoscale structures in the ablation plume. Further, differences in the amount of signal observed between a-C and UNCD are explained by the difference in sample thickness and, specifically, incomplete melting of the UNCD film. Comparisons to spectral simulations based on MD trajectories at extreme conditions indicate that the carbon state in our experiments is crystalline. Normal mode analysis confirmed that symmetrical bending or stretching of the C–C bonds in the diamond lattice results in XES spectra with small intensity differences. Overall, we observed no evidence of melting to a liquid state, as determined by the lack of changes in the spectral properties for up to 100 ps delays following the melting pulses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High pressure melt line of nickel using a generalized embedded atomic method potential

As the second most abundant metal in the Earth's core, nickel plays an important role in determining the structure and temperature of the Earth's core. Yet, the melt line of Ni at pressures corresponding to the Earth's core has not been explored in the literature. Many previous experimental and simulation efforts have reported the melting point of Ni at pressures below 100 GPa, but there exist large discrepancies, most of which have persisted due to various experimental and simulation bottlenecks in handling extreme pressure and temperature conditions. We adopted the generalized embedded atom method, which overcomes the limitations of existing interatomic potentials, to probe phase stability and phase boundaries of Ni at pressures between 50 and 500 GPa. Further, the potential was validated by comparing the cold curves, phonon dispersion curves, and enthalpies of fusion with ab initio density functional theory calculations. Our analysis shows that face centered cubic (FCC) is stable, and the hexagonal close packed (HCP) and body centered cubic (BCC) phases are metastable close to the melt line. Melting temperatures at different pressures were obtained from two-phase co-existence simulations and take the following functional form: $T$ m = $1969.23+19.15P-0.012P$ 2 . In contrast to iron, differences between the melting points of the stable and metastable phases of Ni are less than 250 K at 300 GPa, and the difference in melting points of the metastable BCC and HCP phases changes sign at 500 GPa, which implies that the phase transition mechanisms during solidification can be very complex.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structural study of hcp and liquid iron under shock compression up to 275 GPa

Here we combine nanosecond laser shock compression with in situ picosecond x-ray diffraction to provide structural data on iron up to 275 GPa. We constrain the extent of hcp-liquid coexistence, the onset of total melt, and the structure within the liquid phase. Our results indicate that iron, under shock compression, melts completely by 258(8) GPa. A coordination number analysis indicates that iron is a simple liquid at these pressure-temperature conditions. We also perform texture analysis between the ambient body-centered-cubic (bcc) α, and the hexagonal-closed-packed (hcp) high-pressure ε-phase. We rule out the Rong-Dunlop orientation relationship (OR) between the α and ε - phase s. However, we cannot distinguish between three other closely related ORs: Burger's, Mao-Bassett-Takahashi, and Potter's OR. The solid-liquid coexistence region is constrained from a melt onset pressure of 225(3) GPa from previously published sound speed measurements and full melt [246.5(1.8)–258(8) GPa] from x-ray diffraction measurements, with an associated maximum latent heat of melting of 623 J/g. This value is lower than recently reported theoretical estimates and suggests that the contribution to the earth's geodynamo energy budget from heat release due to freezing of the inner core is smaller than previously thought. Melt pressures for these nanosecond shock experiments are consistent with gas gun shock experiments that last for microseconds, indicating that the melt transition occurs rapidly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Development of an interatomic potential for the W–Ta system

A physics-inspired, data-driven interatomic potential framework for multi-element system is presented. This potential is based on the generalization of the embedded atom method potential and systematically incorporates two-, three- and many-body effects. Different atomic environments are described by atom-centered Gaussian basis sets which provides sufficient flexibility to capture diverse atomic environments and allows for easy optimization of the free parameters. An interatomic potential model for the tungsten–tantalum (W–Ta) system is developed using this framework by training on data from ab initio density functional theory (DFT) calculations. The potential is thoroughly tested at various compositions by comparing bulk and defect properties from experimental and DFT data. It is shown that the potential predicts the elastic constants, defect properties, such as vacancy and interstitial formation energies, core structures of dislocations, and melting points for both pure and tantalum and tungsten with an accuracy comparable to other single element machine learning based potentials. In conclusion, the potential model is used to investigate the formation energies of ordered alloys and vacancy formation energies for chemically random W–Ta alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Chemical evolution in nitrogen shocked beyond the molecular stability limit

Evolution of nitrogen under shock compression up to 100 GPa is revisited via molecular dynamics simulations using a machine-learned interatomic potential. The model is shown to be capable of recovering the structure, dynamics, speciation, and kinetics in hot compressed liquid nitrogen predicted by first-principles molecular dynamics, as well as the measured principal shock Hugoniot and double shock experimental data, albeit without shock cooling. Our results indicate that a purely molecular dissociation description of nitrogen chemistry under shock compression provides an incomplete picture and that short oligomers form in non-negligible quantities. Finally, this suggests that classical models representing the shock dissociation of nitrogen as a transition to an atomic fluid need to be revised to include reversible polymerization effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Molecular Dynamics Simulation of Hygroscopic Aging Effects in Epoxy Polymer

The automobile industry is incorporating more lightweight content in car designs to boost fuel-economy. New structural adhesives are needed to mitigate the corrosion and thermal expansion issues associated with joining dissimilar lightweight materials, but adhesive developers lack a fundamental understanding of the chemistry that occurs in the adhesive as the joint ages. In this study, we developed structural adhesive molecular models and applied classical molecular dynamics simulations and density functional theory calculations to gain molecular insights into the influence of water molecules on the properties of epoxy-based adhesives (DGEBA + Jeffamine (JD230)). The simulations were complemented by experimental synthesis and characterization. Our work underscores the impact of water molecules on the local structure of the epoxy network as well as resulting mechanical properties. Water molecules were mainly coordinated with hydroxyls, primary amines and secondary amines, but also weakly coordinated with ether linkages, which were found most probable to be labile. Simulated stress–strain data indicates that increasing the water content deteriorates the mechanical properties. The Young’s modulus decreased by ~ 30% when the water content increased to 3 wt%. We conclude, this integration of molecular-level chemical insights with mechanical property simulations of the hydrated epoxy system and experimental validation holds the promise to advance lightweight joint technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thermodynamics of diamond formation from hydrocarbon mixtures in planets

Hydrocarbon mixtures are extremely abundant in the Universe, and diamond formation from them can play a crucial role in shaping the interior structure and evolution of planets. With first-principles accuracy, we first estimate the melting line of diamond, and then reveal the nature of chemical bonding in hydrocarbons at extreme conditions. We finally establish the pressure-temperature phase boundary where it is thermodynamically possible for diamond to form from hydrocarbon mixtures with different atomic fractions of carbon. Notably, here we show a depletion zone at pressures above 200 GPa and temperatures below 3000 K-3500 K where diamond formation is thermodynamically favorable regardless of the carbon atomic fraction, due to a phase separation mechanism. The cooler condition of the interior of Neptune compared to Uranus means that the former is much more likely to contain the depletion zone. Our findings can help explain the dichotomy of the two ice giants manifested by the low luminosity of Uranus, and lead to a better understanding of (exo-)planetary formation and evolution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Properties of carbon up to 10 million kelvin from Kohn-Sham density functional theory molecular dynamics

Accurately modeling dense plasmas over wide-ranging conditions of pressure and temperature is a grand challenge critically important to our understanding of stellar and planetary physics as well as inertial confinement fusion. In this work, we employ Kohn-Sham density functional theory (DFT) molecular dynamics (MD) to compute the properties of carbon at warm and hot dense matter conditions in the vicinity of the principal Hugoniot. In particular, we calculate the equation of state (EOS), Hugoniot, pair distribution functions, and diffusion coefficients for carbon at densities spanning 8 g/$\mathrm{cm^3}$ to 16 g/$\mathrm{cm^3}$ and temperatures ranging from 100 kK to 10 MK using the Spectral Quadrature method. Here, we find that the computed EOS and Hugoniot are in good agreement with path integral Monte Carlo results and the sesame database. Additionally, we calculate the ion-ion structure factor and viscosity for selected points. All results presented are at the level of full Kohn-Sham DFT-MD, free of empirical parameters, average-atom, and orbital-free approximations employed previously at such conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Experimental and theoretical examination of shock-compressed copper through the fcc to bcc to melt phase transitions

Recent studies show a face-centered cubic (fcc) to body-centered cubic (bcc) transformation along the shock Hugoniot for several metals (i.e., Cu, Au, and Ag). Here, we combine laser-shock compression of Cu foils on nanosecond timescales with in situ x-ray diffraction (XRD) to examine the microstructural changes with stress. We study the fcc phase and the phase transition from fcc to bcc (pressures greater than 180 GPa). Textural analysis of the azimuthal intensities from the XRD images is consistent with transformation into the bcc phase through the Pitsch-distortion mechanism. We use embedded atom model molecular dynamics simulations to determine the stability of the bcc phase in pressure–temperature space. Finally, our results indicate that the bcc phase is stabilized only at high temperatures and remains stable at pressures greater than 500 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermodynamics of high-pressure ice phases explored with atomistic simulations

Most experimentally known high-pressure ice phases have a body-centred cubic (bcc) oxygen lattice. Our large-scale molecular-dynamics simulations with a machine-learning potential indicate that, amongst these bcc ice phases, ices VII, VII' and X are the same thermodynamic phase under different conditions, whereas superionic ice VII" has a first-order phase boundary with ice VII'. Moreover, at about 300 GPa, the transformation between ice X and the Pbcm phase has a sharp structural change but no apparent activation barrier, whilst at higher pressures the barrier gradually increases. Our study thus clarifies the phase behaviour of the high-pressure ices and reveals peculiar solid–solid transition mechanisms not known in other systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗