Engineering topics

Hamilton, George S.

Publications and source records attributed to Hamilton, George S..

8 records

NASA NTRS2005

We Have the Spaceship; But Where's the Start Button: Human Engineering Issues in the Age of Long Duration Space Exploration

As long duration space exploration and habitation becomes more commonplace, a number of Human Engineering factors (Gravitational Adaptation, 2-D to 3-D Movement Adaptation, Design Form/Function, and Space Ergonomics to name a few) will become more pronounced. More research and development is needed in these areas or the explorers may find themselves in painful or dangerous situations.

Hamilton, George S.↗

NASA NTRS2004

Holistic Design for Total Product Well Being

Recent hardware development work at NASA's Marshall Space Flight Center creates and argument for the use of a holistic design approach as opposed to a piece part design approach. A piece part design approach being one where individual pieces are developed to their finished state having to meet certain interface and human engineering requirements without much consideration to the final product as a whole. A holistic design approach being one where the final product is evaluated early and frequently during the design process, and individual parts are developed with consideration to how they interact a whole,and how they interact with the user and environment. Examples from the development of the Materials Science Research Rack - 1 will illustrate: a design failure due to piece part design; a design save, due to a failure of piece part design, but saved by evaluating the design holistically; and a design success due to a holistic design approach.

Adams, Chris W.↗

NASA NTRS2004

Human Motion Tracking at Marshall Space Flight Center's Collaborative Engineering Center ANVIL

The installation and use of electromagnetic human motion trackers requires a specially designed and metal-free environment for optimal performance. Such an area is not readily available at the Marshall Space Flight Center Collaborative Engineering Center ANVIL. Our paper details a systems engineering approach to installing and operating Ascension Technologies Ethernet MotionStar tracking system in a sub-optimal environment, used with the JACK human computer model's motion capture capabilities. We also discuss how this system is integrated into the Marshall Space Flight Center's Human Engineering process.

Henderson, Steven J.↗

NASA NTRS2003

Evaluating the Usability of Pinchigator, a system for Navigating Virtual Worlds using Pinch Gloves

Appropriate design of two dimensional user interfaces (2D U/I) utilizing the well known WIMP (Window, Icon, Menu, Pointing device) environment for computer software is well studied and guidance can be found in several standards. Three-dimensional U/I design is not nearly so mature as 2D U/I, and standards bodies have not reached consensus on what makes a usable interface. This is especially true when the tools for interacting with the virtual environment may include stereo viewing, real time trackers and pinch gloves instead of just a mouse & keyboard. Over the last several years the authors have created a 3D U/I system dubbed Pinchigator for navigating virtual worlds based on the dVise dV/Mockup visualization software, Fakespace Pinch Gloves and Pohlemus trackers. The current work is to test the usability of the system on several virtual worlds, suggest improvements to increase Pinchigator s usability, and then to generalize about what was learned and how those lessons might be applied to improve other 3D U/I systems.

Hamilton, George S.↗

NASA NTRS1999

Use of Human Computer Models to Influence the Design of International Space Station Propulsion Module

The overall design for the International Space Station (ISS) Propulsion (Prop) Module consists of two bell shapes connected by a long tube having a shirt sleeve environment. The tube is to be used by the flight crew to transfer equipment and supplies from the Shuttle to ISS. Due to a desire to use existing space qualified hardware, the tube internal diameter was initially set at 38 inches, while the human engineering specification, NASA-STD-3000, required 50". Human computer modeling using the MannequinPro application was used to help make the case to enlarge the passageway to meet the specification. 3D CAD models of Prop Module were created with 38 inches, 45 inches and 50 inches passageways and human figures in the neutral body posture as well as a fetal posture were inserted into the model and systematically exercised. Results showed that only the 50 inches tube would accommodate a mid tube turn around by a large crew member, 95th percentile American males, by stature.

Hamilton, George S.↗

NASA NTRS1999

The Use of Human Factors Simulation to Conserve Operations Expense

In preparation for on-orbit operations, NASA performs experiments aboard a KC-135 which performs parabolic maneuvers, resulting in short periods of microgravity. While considerably less expensive than space operations, the use of this aircraft is costly. Simulation of tasks to be performed during the flight can allow the participants to optimize hardware configuration and crew interaction prior to flight. This presentation will demonstrate the utility of such simulation. The experiment simulated is the fluid dynamics of epoxy components which may be used in a patch kit in the event of meteoroid damage to the International Space Station. Improved configuration and operational efficiencies were reflected in early and increased data collection.

Hamilton, George S.↗

NASA NTRS1998

Engineering Registration-Why Bother?

This paper describes the benefits of obtaining the credentials of Professional Engineer (PE) also known as Registered Engineer, and Engineer in Training (EIT) also known as Engineering Intern; necessary preparation and preparation tools (i.e. tutorial, study guides, review classes, sample questions), the application process, and information for both graduates and undergraduates who seek their PE/EIT. Also included will be updates on the government and industry exemptions; what has NSPE (National Society for Professional Engineers) done for me lately; comments about long and short term effects of NAFTA on the practice of engineering, and information about state to state registration differences, focusing on the six southeastern states of Alabama, Florida, Georgia, Kentucky, Mississippi, and Tennessee.

Hamilton, George S.↗

NASA NTRS1998

Conversion of IVA Human Computer Model to EVA Use and Evaluation and Comparison of the Result to Existing EVA Models

This paper describes the methods, rationale, and comparative results of the conversion of an intravehicular (IVA) 3D human computer model (HCM) to extravehicular (EVA) use and compares the converted model to an existing model on another computer platform. The task of accurately modeling a spacesuited human figure in software is daunting: the suit restricts the human's joint range of motion (ROM) and does not have joints collocated with human joints. The modeling of the variety of materials needed to construct a space suit (e. g. metal bearings, rigid fiberglass torso, flexible cloth limbs and rubber coated gloves) attached to a human figure is currently out of reach of desktop computer hardware and software. Therefore a simplified approach was taken. The HCM's body parts were enlarged and the joint ROM was restricted to match the existing spacesuit model. This basic approach could be used to model other restrictive environments in industry such as chemical or fire protective clothing. In summary, the approach provides a moderate fidelity, usable tool which will run on current notebook computers.

Hamilton, George S.↗