Search NASA⌕ Search

Engineering topics

Han, Xue

Publications and source records attributed to Han, Xue.

45 records · Page 3

Post-synthetic modulation of the charge distribution in a metal–organic framework for optimal binding of carbon dioxide and sulfur dioxide

Modulation of pore environment is an effective strategy to optimize guest binding in porous materials. We report the post-synthetic modification of the charge distribution in a charged metal–organic framework, MFM-305-CH3, [Al(OH)(L)]Cl, [(H2L)Cl ¼ 3,5-dicarboxy-1-methylpyridinium chloride] and its effect on guest binding. MFM-305-CH3 shows a distribution of cationic (methylpyridinium) and anionic (chloride) centers and can be modified to release free pyridyl N-centres by thermal demethylation of the 1- methylpyridinium moiety to give the neutral isostructural MFM-305. This leads simultaneously to enhanced adsorption capacities and selectivities (two parameters that often change in opposite directions) for CO2 and SO2 in MFM-305. The host–guest binding has been comprehensively investigated by in situ synchrotron X-ray and neutron powder diffraction, inelastic neutron scattering, synchrotron infrared and 2 H NMR spectroscopy and theoretical modelling to reveal the binding domains of CO2 and SO2 in these materials. CO2 and SO2 binding in MFM-305-CH3 is shown to occur via hydrogen bonding to the methyl and aromatic-CH groups, with a long range interaction to chloride for CO2. In MFM-305 the hydroxyl, pyridyl and aromatic C–H groups bind CO2 and SO2 more effectively via hydrogen bonds and dipole interactions. Post-synthetic modification via dealkylation of the as-synthesised metal–organic framework is a powerful route to the synthesis of materials incorporating active polar groups that cannot be prepared directly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tribological Performance of Austempered and Tempered Ductile Iron

Austempered ductile iron with its unique ausferritic structure is produced by an isothermal heat treatment process. Austempered ductile iron is a potential material to substitute for traditional steel castings and forgings in current industry due to its excellent mechanical properties. The tempering process is frequently used to enhance the ductility and toughness of a material and reduce residual stress. In this research, the phase transformation of austempered ductile iron was studied by applying various tempering temperatures with constant holding duration. It was found that the ausferritic structure was decomposed into dispersive cementite particles after receiving a tempering temperature of 538 °C or higher. The specific amount of retained austenite was analyzed by X-ray diffraction. The wear resistance of tempered austempered ductile iron was investigated by using a ball-on-disk sliding test configuration. The results were compared with conventional quenched and tempered ductile iron under equivalent hardness. Both austempered ductile iron and tempered austempered ductile iron samples had better wear resistance than quenched and tempered ductile iron. The results presented in this research can be utilized as a reference in the tempering treatment of austempered ductile iron material for future applications.

36 MATERIALS SCIENCE↗

Construction of Ni-Co-Mn layered double hydroxide nanoflakes assembled hollow nanocages from bimetallic imidazolate frameworks for supercapacitors

Highlights: • Bimetallic Co-Mn ZIF is successfully prepared. • N-Co-Mn LDH nanoflakes assembled hollow nanocage is constructed by a MOF templating method. • The N-Co-Mn LDH exhibits excellent pseudocapacitive performance. - Abstract: Layered double hydroxides (LDHs) with 3-dimentional (3D) hollow nanoarchitetures are highly desirable for energy related applications. In this study, Ni-Co-Mn LDH nanoflakes assembled hollow nanocages are constructed from bimetallic imidazolate framworks precursors. Benefiting from the 3D hierarchical porous strcuture and composition, the as-synthesized ternary Ni-Co-Mn LDH hollow nanocage, as a electrode for supercapacitor, demonstrates a remarkable electrochemical performance with a high specific capacitance of 2012.5 F g{sup −1} at 1 A g{sup −1} and a good rate capacity of 75.0% retention at 10 A g{sup −1}, significantly outperforming binary Ni-Co LDH (1266.2 F g{sup −1} at 1 A g{sup −1}, 41.8% retention at 10 A g{sup −1}). This work demonstrates the construction of 3D hollow nanostructured LDH with multicomponent compositions for the first time, and can be simply extended to construct other hollow structured electrode materials for energy storage devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and characterization of the Al-Cu-Mg-Si-Mn composites reinforced by different surface modified SiCp

Highlights: • The Ti-coated SiC{sub p} exhibited more uniformly distribution in composites than that of pre-oxidized SiC{sub p}. • Ti-coated SiC{sub p} obtained better SiC{sub p}-Al interface bonding than that of pre-oxidized SiC{sub p}. • The composites reinforced by Ti-coated SiC{sub p} exhibited better tensile properties than that reinforced by pre-oxidized SiC{sub p}. - Abstract: In this paper, the 4 vol% SiC{sub p}/Al-Cu-Mg-Si-Mn composites were prepared by method of stirring casting. The effects of SiC{sub p} surface modifications (oxidization and Ti-coating) and particle sizes (5 μm, 10 μm and 15 μm) on the microstructure and tensile properties of the composites were analyzed. The effects of SiC{sub p} sizes on the distribution of SiC{sub p} in the pre-oxidized SiC{sub p}/Al-Cu-Mg-Si-Mn composites were larger than those in Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composites. The Al-Cu-Mg-Si-Mn composites reinforced with Ti-coated SiC{sub p} exhibited more uniform SiC{sub p} distributions and higher tensile mechanical properties than those reinforced with the pre-oxidized SiC{sub p}. When the SiC{sub p} size was 15 μm, the Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composite showed the best yield strength (σ{sub 0.2}), ultimate tensile strength (σ{sub UTS}) and fracture strain (ε{sub f}) of 410 MPa, 548 MPa and 7.6% with the increase of 10.2%, 2.6% and 5.6% than that of reinforced by pre-oxidized SiC{sub p}. The more uniformly dispersed particles and better tensile properties of the Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composites could be attributed to the better wetting between Ti-coated SiC{sub p} and molten Al.

36 MATERIALS SCIENCE↗

Reversible adsorption of nitrogen dioxide within a robust porous metal–organic framework

Nitrogen dioxide (NO 2 ) is a major air pollutant causing significant environmental and health problems. We report reversible adsorption of NO 2 in a robust metal–organic framework. Under ambient conditions, MFM-300(Al) exhibits a reversible NO 2 isotherm uptake of 14.1 mmol g -1 , and, more importantly, exceptional selective removal of low-concentration NO 2 (5,000 to <1 ppm) from gas mixtures. Complementary experiments reveal five types of supramolecular interaction that cooperatively bind both NO 2 and N 2 O 4 molecules within MFM-300(Al). We find that the in situ equilibrium 2NO 2 ↔ N 2 O 4 within the pores is pressure-independent, whereas ex situ this equilibrium is an exemplary pressure-dependent first-order process. The coexistence of helical monomer–dimer chains of NO 2 in MFM-300(Al) could provide a foundation for the fundamental understanding of the chemical properties of guest molecules within porous hosts. Lastly, this work may pave the way for the development of future capture and conversion technologies.

36 MATERIALS SCIENCE↗

Enhancement of CO 2 Uptake and Selectivity in a Metal–Organic Framework by the Incorporation of Thiophene Functionality

The complex [Zn 2 (tdc) 2 dabco] (H 2 tdc = thiophene-2,5-dicarboxylic acid; dabco = 1,4-diazabicyclooctane) shows a remarkable increase in carbon dioxide (CO 2 ) uptake and CO 2 /dinitrogen (N 2 ) selectivity compared to the nonthiophene analogue [Zn 2 (bdc) 2 dabco] (H 2 bdc = benzene-1,4-dicarboxylic acid; terephthalic acid). CO 2 adsorption at 1 bar for [Zn 2 (tdc) 2 dabco] is 67.4 cm 3 ·g -1 (13.2 wt %) at 298 K and 153 cm 3 ·g -1 (30.0 wt %) at 273 K. For [Zn 2 (bdc) 2 dabco], the equivalent values are 46 cm 3 ·g -1 (9.0 wt %) and 122 cm 3 ·g -1 (23.9 wt %), respectively. The isosteric heat of adsorption for CO 2 in [Zn 2 (tdc) 2 dabco] at zero coverage is low (23.65 kJ·mol -1 ), ensuring facile regeneration of the porous material. Enhancement by the thiophene group on the separation of CO 2 /N 2 gas mixtures has been confirmed by both ideal adsorbate solution theory calculations and dynamic breakthrough experiments. The preferred binding sites of adsorbed CO 2 in [Zn 2 (tdc) 2 dabco] have been unambiguously determined by in situ single-crystal diffraction studies on CO 2 -loaded [Zn 2 (tdc) 2 dabco], coupled with quantum-chemical calculations. These studies unveil the role of the thiophene moieties in the specific CO 2 binding via an induced dipole interaction between CO 2 and the sulfur center, confirming that an enhanced CO 2 capacity in [Zn 2 (tdc) 2 dabco] is achieved without the presence of open metal sites. The experimental data and theoretical insight suggest a viable strategy for improvement of the adsorption properties of already known materials through the incorporation of sulfur-based heterocycles within their porous structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective production of arenes via direct lignin upgrading over a niobium-based catalyst

Lignin is the only large-volume renewable source of aromatic chemicals. Efficient depolymerization and deoxygenation of lignin while retaining the aromatic functionality are attractive but extremely challenging. Here we report the selective production of arenes via direct hydrodeoxygenation of organosolv lignin over a porous Ru/Nb 2 O 5 catalyst that enabled the complete removal of the oxygen content from lignin. The conversion of birch lignin to monomer C7–C9 hydrocarbons is nearly quantitative based on its monomer content, with a total mass yield of 35.5 wt% and an exceptional arene selectivity of 71 wt%. Inelastic neutron scattering and DFT calculations confirm that the Nb 2 O 5 support is catalytically unique compared with other traditional oxide supports, and the disassociation energy of Caromatic–OH bonds in phenolics is significantly reduced upon adsorption on Nb 2 O 5 , resulting in its distinct selectivity to arenes. This one-pot process provides a promising approach for improved lignin valorization with general applicability.

36 MATERIALS SCIENCE↗