Search NASA⌕ Search

Engineering topics

Hansen, Erich

Publications and source records attributed to Hansen, Erich.

Engineering scale demonstration of a prospective cast Stone process - 15584

A cementitious waste form is one of the alternatives being evaluated for Supplemental Immobilization of Hanford Low Activity Waste (LAW). Washington River Protection Solutions (WRPS) is collecting data on cementitious or pozzolanic waste forms such as Cast Stone. The goal of this project for WRPS is to obtain data on the performance of the Cast Stone waste form for immobilizing LAW. As part of the data package being assembled, an engineering-scale demonstration with non-radioactive simulants was performed at the Savannah River National Laboratory (SRNL) using the Scaled Continuous Processing Facility (SCPF) to fill a container with simulated Cast Stone grout. Legacy salt solution from previous Hanford salt waste testing was trimmed to resemble the average composition generated from the Hanford Tank Waste Operation Simulator (HTWOS) used in the screening tests. The dry blend materials, ordinary portland cement (OPC), Class F fly ash, and ground granulated blast furnace slag (GGBFS or BFS) were obtained from Lafarge North America in Pasco, WA. Over three days, the SCPF was used to fill a 6,056 liter (1600 gallon) container with simulated Cast Stone grout. The tank was instrumented with x-, y-, and z-axis thermocouples to monitor curing temperature and two formed core sampling vials. The target production rate was 5.7 L/min (1.5 gpm). This required a salt solution flow rate of approximately 3.78 L/min (1 gpm) and a premix feed rate of approximately 263 kh/h (580 lb/h). The final surface slope at a fill height of 100 cm was 2.5-3.8 cm across the 260 cm (8.5 ft) diameter tank. During processing, grout was collected from both the mixer discharge and the discharge into the tank. These samples were stored in a humid environment either in a closed box proximal to the tank or inside the laboratory. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Extending the lifetime of mixer paddles used in the production of a low-level radioactive cementitious waste form - 15624

The salt-stone Production Facility (SPF) at the Savannah River Site (SRS) immobilizes low-level radioactive salt solution as a cementitious waste form known as salt-stone. The mixer used in the SPF is a '10-inch' Readco-Kurimoto continuous mixer with paddles fabricated from a high toughness steel. salt-stone is processed daily at a rate of 9.46 E-03 m{sup 3}/s (150 gallons per minute) in a caustic and radioactive environment. The paddles have degraded much quicker than expected which limits production rates and increases outage times. Due to the high cost of the mixer and the limited maintenance due to the radioactive environment, a combination of material properties and paddle configuration must be employed to extend the lifetime of the paddles. This paper will discuss two wear tests conducted by the Savannah River National Laboratory (SRNL) to determine the optimum paddle configuration to reduce wear on the mixer paddles. The first wear test used the mixer design operated up to December 2011 as the baseline and the second test used the mixer design installed after December 2011 as its baseline. As a result of these tests, the SPF will be implementing a new paddle configuration in the mixer currently installed in the SPF process room. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Impact of Rheological Modifiers on Various Slurries Supporting DOE Waste Processing

Controlling the stability and subsequent rheological properties of slurries has been an important but challenging issue in nuclear waste treatment, one that previous research has yet to sufficiently address. At the Hanford and Savannah River sites, operation of the waste treatment facilities at increased solids loading reduces the evaporative load on the melter systems and thereby increases waste processing rates. However, at these higher solids loadings, increased slurry rheology becomes a significant processing issue. The current study evaluates the use of several rheological modifiers to alleviate increased slurry rheology at high waste solids concentrations. Rheological modifiers change particle interactions in slurry. For colloidal slurries, modifiers mainly alter the electrostatic and steric interactions between particles, leading to a change in slurry rheology. Weak organic acid type rheological modifiers strengthen electrostatic repulsion whereas nonionic/polymer surfactant type rheological modifiers introduce a steric repulsion. We investigated various rheological modifiers using high level waste (HLW) nuclear waste simulants characterized typically by high ionic strength and a wide range of pH from 4 to 13. Using rheological analysis, it was found that citric acid and polyacrylic acid would be good rheological modifiers for the HLW simulants tested, effectively reducing slurry rheology by 40% or more. Physical insights into the mechanisms driving stabilization by these rheological modifiers will be discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rheological Modifiers and Wetting Agents

DOE tank waste treatment plants, the Waste Treatment Plant (WTP) at Hanford and Defense Waste Processing Facility (DWPF) at Savannah River, are designed to vitrify radioactive waste slurries for long-term storage. Plant throughput is currently limited by the waste solids loading. To increase waste throughput rates in the plant, an increase in the slurry solids concentration (or conversely, a reduction in the mass fraction of water in the waste) is being considered. However, the present mechanical designs used to mix and transport theses slurries are limited by the rheological properties. This reduction of water results in an increase in rheological properties that challenge plant design and performance. To support this increase in throughput, there is a need to reduce the rheological properties of these waste slurries. The objective of this project is to determine a small set of well-performing and commercially available rheological modifiers that allow control rheological properties of various simulated and actual waste slurries and to understand the physical mechanisms that govern modification of waste rheology. It is estimated that processing at a higher solids concentration will reduce the operating life of these plants by one year for both facilities, representing roughly $1B in lifecycle cost savings. In addition, this research is potentially important to sustainable operations of both WTP and DWPF

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗