Coupled Gas-Surface Chemistry: New Tools for Discovery Science.
Abstract not provided.
Engineering topics
Publications and source records attributed to Hansen, Nils.
Abstract not provided.
A comprehensive, chemically detailed mechanism for the combustion of 2-methyl-2-butene and n-pentane is presented to provide insights into the different sooting tendencies of these two structurally different C5 hydrocarbons. A hierarchically assembled mechanism has been developed to specifically target speciation data from low-pressure premixed flames of 2-methyl-2-butene and newly measured mole fraction data for a fuel-rich (Φ = 1.8) n -pentane flame, in which species profiles up to phenol were quantified. The partially isomer-resolved chemical composition of this flame was determined using flame-sampling molecular-beam mass spectrometry with single-photon ionization by tunable, synchrotron-generated vacuum-ultraviolet radiation. The presented model, which includes a newly determined, consistent set of the thermochemistry data for the C5 species, presents overall satisfactory capabilities to predict the mole fraction profiles of common combustion intermediates. The analysis of the model predictions revealed the fuel-structure dependencies (i.e. saturated vs. unsaturated and linear vs. branched) of the formation of small aromatic species that are considered as soot precursors. Here, the propensity of the 2-methyl-2-butene flame to form larger concentrations of aromatic species was traced back to the readily available formation routes of several small precursor molecules and the efficient formation of “first aromatic rings” beyond benzene.
Not Available
Abstract not provided.
We report the formation of small polycyclic aromatic hydrocarbons (PAHs) and their precursors can be strongly affected by reactions of C5 species. For improving existing combustion mechanisms for small PAH formation, it is therefore valuable to understand the fuel-specific chemistry of C5 fuels. To this end, we provide quantitative isomer-resolved species profiles measured in a laminar premixed ( Φ = 1.8) low-pressure (4 kPa) flame of 1-pentene with photoionization molecular-beam mass spectrometry (PI-MBMS) using tunable synchrotron vacuum-ultraviolet (VUV) radiation. These experimental results are accompanied with numerical simulations, starting from models from the literature by Wang et al. [JetSurF version 2.0 (2010)] and Healy et al. [Energy Fuels 24 (2010) 1521–1528] that were developed for different fuels, but which include 1-pentene as an intermediate, and by Narayanaswamy et al. [Combust. Flame 157 (2010) 1879–1898] focusing on the small PAH chemistry. Taking observed discrepancies between experimental results and simulations into consideration, a mechanism for C 5 chemistry was newly developed including PAH formation pathways, and its performance analyzed in detail. Special emphasis was placed on the initial fuel consumption of 1-pentene as well as on formation pathways of small aromatics. The mechanisms show differences regarding fuel decomposition and hydrocarbon growth reactions. These contribute to noticeable differences between the simulations with different models on one hand, and deviations between model predictions and experimental results on the other. While the new model presents overall satisfactory capabilities to predict the mole fraction profiles of common combustion intermediates, the predictive capability of the literature models was not fully satisfying for some intermediate species, including C 4 H 6 , C 7 H 8 , and C 10 H 8 . Lastly, the results indicate that the fuel-specific C 5 reaction routes as well as the mechanism for small PAH formation need further investigation.
Given the multi-physical nature of coal combustion, the development and validation of detailed chemical models reproducing coal volatiles combustion under oxy-fuel conditions is a crucial step towards the advancement of predictive full-scale simulations. During the devolatilization process, a large variety of gases is released and undergoes secondary pyrolysis and oxidation reactions. Therefore, the ability to capture their interactions is a prerequisite for each chemical model used in its detailed or reduced form to simulate these processes. In this work, a high-resolution time-of-flight molecular-beam mass spectrometer was employed to enable fast and simultaneous detection of stable and unstable species in counterflow flames of typical light volatiles. Following an approach of increasing complexity, carbon dioxide and methane were progressively added to an argon diluted acetylene base flame. For the three flames investigated here, results showed a significant increase in the concentration of C 2 and C 3 hydrocarbons and oxygenated compounds caused by methane addition to the acetylene flame. By hindering the production of the butadienyl radical, the addition of methane induces the reduction of benzene which triggers the decrease of aromatic species. Conversely, CO 2 addition did not have significant effects on intermediates. To guide and interpret the measurements, numerical simulations with two existing chemical models were performed and the results were found to be consistent with the experimental data for small hydrocarbons. Some discrepancies were found between the two model predictions and between simulations and experiments for C 4 and C 5 species. In addition, numerical simulations were found to overestimate the role of the methyl radical in aromatics formation.
The reaction network of the simplest Criegee Intermediate (CI) CH2OO has been studied experimentally during the ozonolysis of ethylene. The results provide valuable information about plasma- and ozone-assisted combustion processes and atmospheric aerosol formation. A network of CI reactions was identified, which can be described best by the sequential addition of CI with ethylene, water, formic acid, and other molecules containing hydroxy, aldehyde, and hydroperoxy functional groups. Species resulting from as many as four sequential CI addition reactions were observed, and these species are highly oxygenated oligomers that are known components of secondary organic aerosols in the atmosphere. Insights into these reaction pathways were obtained from a near-atmsopheric pressure jet-stirred reactor coupled to a high-resolution molecular-beam mass spectrometer. The mass spectrometer employs single-photon ionization with synchrotron-generated, tunable vacuum-ultraviolet radiation to minimize fragmentation via near-threshold ionization and to observe mass-selected photoionization efficiency (PIE) curves. Species identification is supported by comparisons of the mass-selected, experimentally observed photo-ionization thresholds with theoretical calculations for the ionization energies. A variety of multi-functional peroxide species are identified, including hydroxymethyl hydroperoxide (HOCH2OOH), hydroperoxymethyl formate (HOOCH2OCHO), methoxymethyl hydroperoxide (CH3OCH2OOH), ethoxymethyl hydroperoxide (C2H5OCH2OOH), 2-hydroxyethyl hydroperoxide (HOC2H4OOH), dihydroperoxy methane (HOOCH2OOH), and 1-hydroperoxypropan-2-one [CH3C(=O)CH2OOH]. A semi-quantitative analysis of the signal intensities as function of successive CI additions and temperature provides mechanistic insights and valuable information for future modeling work of the associated energy conversion processes and atmospheric chemistry. Furthermore this work provides further evidence that the CI is a key intermediate in the formation of oligomeric species via the formation of hydroperoxides.
External electric field and plasma assisted combustion show great potential for combustion enhancement, e.g., emission and ignition control. To understand soot suppression by external electric fields and flame ignition in spark ignition engines, flame ion chemistry needs to be investigated and developed. In this work, comprehensive and systematic investigations of neutral and ion chemistry are conducted in premixed rich methane flames. Cations are measured by quadrupole molecular beam mass spectrometry (MBMS), and neutrals are measured by synchrotron vacuum ultra violet photoionization time of flight MBMS (SVUV-PI-TOF-MBMS). The molecular formula and dominant isomers of various measured cations are identified based on literature survey and quantum chemistry calculations. Experimentally, we found that H 3 O + is the dominant cation in slightly rich flame (Φ = 1.5), but C 3 H 3 + is the most significant in very rich flames (Φ = 1.8 and 2.0). An updated ion chemistry model is proposed and used to explain the effects of changing equivalence ratio. To further verify key ion-neutral reaction pathways, measured neutral profiles are compared with cation profiles experimentally. Furthermore, detailed cation and neutral measurements and numerical simulations by this work help to understand and develop ion chemistry models. Deficiencies in our current understanding of ion chemistry are also highlighted to motivate further research.
Flame-sampling experiments, especially in conjunction with laminar low-pressure premixed flames, are routinely used in combustion chemistry studies to unravel the identities and quantities of key intermediates and their pathways. In many instances, however, an unambiguous interpretation of the experimental and modeling results is hampered by the uncertainties about the probe-induced, perturbed temperature profile. To overcome this limitation, two-dimensional perturbations of the temperature field caused by sampling probes with different geometries have been investigated using synchrotron-based X-ray fluorescence spectroscopy. In these experiments, which were performed at the 7-BM beamline of the Advanced Photon Source (APS) at the Argonne National Laboratory, a continuous beam of hard X-rays at 15 keV was used to excite krypton atoms that were added in a concentration of 5 vol.-% to the unburnt gas mixture and the resulting krypton fluorescence at 12.65 keV was subsequently collected. The highly spatially resolved signal was converted into the local flame temperature to obtain temperature fields at various burner-probe separations as functions of the distance to the burner surface and the radial distance from the centerline. Multiple measurements were performed with different probe geometries and because of the observed impact on the temperature profiles the results clearly revealed the need to specify the sampling probe design to enable quantitative and meaningful comparisons of modeling results with flame-sampled mole fraction data. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
Ethylene oxidation initiated by ozone addition (ozonolysis) is carried out in a jet-stirred reactor from 300-1000 K to explore the kinetic pathways relevant to low-temperature oxidation. The temperature dependencies of species’ mole fractions are quantified using molecular-beam mass spectrometry with electron ionization and single-photon ionization employing tunable synchrotron-generated vacuum-ultraviolet radiation. Upon ozone addition, significant ethylene oxidation is found in the low-temperature regime from 300-600 K. Here, we provide new insights into the ethylene ozonolysis reaction network via identification and quantification of previously elusive intermediates by combining experimental photoionization energy scans and ab initio threshold energy calculations for isomer identification. Specifically, the C 2 H 4 +O 3 adduct C 2 H 4 O 3 is identified as a keto-hydroperoxide (hydroperoxy-acetaldehyde, HOOCH 2 CHO) based on the calculated and experimentally observed ionization energy of 9.80 (±0.05) eV. Quantification using a photoionization cross-section of 5 Mb at 10.5 eV results in 5 ppm at atmospheric conditions which decreases monotonically with temperature until 550 K. Other hydroperoxide species, that contribute in larger amounts to the low-temperature oxidation of C 2 H 4 , like H 2 O 2 , CH 3 OOH, and C 2 H 5 OOH, are identified and their temperature-dependent mole fractions are reported. The experimental evidence for additional oxygenated species such as methanol, ketene, acetaldehyde, and hydroxy-acetaldehyde suggest multiple active oxidation routes. This experimental investigation closes the gap between ozonolysis at atmospheric and elevated temperature conditions and provides a database for future modeling.
Acetaldehyde is an important intermediate and a toxic emission in the combustion of fuels, especially for biofuels. To better understand its combustion characteristics, a detailed chemical kinetic model describing the oxidation of acetaldehyde has been developed and comprehensively validated against various types of literature data including laminar flame speeds, oxidation and pyrolysis in shock tubes, chemical structure of premixed flames, and low-temperature oxidation in jet-stirred reactors. To extend the validation range, the chemical structure of a counterflow flame fueled by acetaldehyde at 600 Torr has been measured using vacuum ultra-violet photoionization molecular-beam mass spectrometry. In addition, ignition delay times at 10 atm and 700-1100 K were measured in a rapid compression machine, and a negative temperature coefficient (NTC) behavior was observed. Here, the present kinetic model well reproduces the results of various acetaldehyde combustion experiments covering wide ranges of temperatures (300–2300 K) and pressures (0.02–10 atm), and explains well the observed NTC behavior based on the competition between multiple oxidation pathways for the methyl radicals and their self-recombination forming ethane, a relatively stable species at temperatures below 1000 K.