Search NASA⌕ Search

Engineering topics

Hansen, W.

Publications and source records attributed to Hansen, W..

Effect of low-temperature post-growth annealing on anisotropic strain in epitaxial Fe layers deposited on GaAs(001)

We study the effect of low-temperature post growth annealing on the Fe layer in an epitaxial Fe/GaAs(001) heterojunction. High resolution X-ray diffraction and X-ray reflectivity were used to probe the Fe layer before and after annealing. No change in morphological features like annealing induced intermixing and thickness variation of the Fe layer are observed. However, annealing leads to increase in the compressive strain and improves isotropy of the ferromagnetic layer as revealed by measuring both lateral and out-of-plane lattice components.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The g-factor of quasi-two-dimensional electrons in InAs/InGaAs/InAlAs inserted-channels

We have measured the Landau-level spin-splitting of two-dimensional electrons in the composite InAs/InGaAs channels of two InAs/InGaAs/InAlAs heterostructures with different alloy compositions by magnetotransport and THz magneto-photoconductivity in magnetic fields up to 10 T. The structures differ importantly in the mobility of the channel, the electron density and the composition of the barriers. The magnitudes of the experimental g-factors for B along the quantization axis and their anisotropies are larger by at least a factor of 2 than the corresponding calculated single particle values. The angular dependence of many-body exchange contributions and the effects of broadening of Landau–level densities of states are necessary for understanding this behaviour. We find evidence for a marked decrease of the exchange contribution at low perpendicular magnetic fields in the higher mobility sample from coincidence measurements, but no indications of such behaviour in the lower mobility sample.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Versatile atomic force microscopy setup combined with micro-focused X-ray beam

Micro-focused X-ray beams produced by third generation synchrotron sources offer new perspective of studying strains and processes at nanoscale. Atomic force microscope setup combined with a micro-focused synchrotron beam allows precise positioning and nanomanipulation of nanostructures under illumination. In this paper, we report on integration of a portable commercial atomic force microscope setup into a hard X-ray synchrotron beamline. Details of design, sample alignment procedure, and performance of the setup are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical and terahertz magnetospectroscopy studies of laser-patterned micro- and nanostructures on InAs-based heterostructures

Nanostructures fabricated from narrow-gap semiconductors with strong spin-orbit interaction (SOI), such as InAs, can be used to filter momentum modes of electrons and offer the possibility to create and detect spin-polarized currents entirely by electric fields. Here, we present magnetotransport and THz magnetospectroscopy investigations of Hall-bars with back-gates made from in InGaAs/InAlAs quantum well structures with a strained 4 nm InAs-inserted channel. The two-dimensional electron gas is at 53 nm depth and has a carrier density of about 6 × 10{sup 11 }cm{sup −2} and mobility of about 2 × 10{sup 5} cm{sup 2}/Vs, after illumination. Electrical and THz optical transport measurements at low temperatures and in high magnetic fields reveal an effective mass of 0.038m{sub 0} and an anisotropic g-factor of up to 20, larger than for bulk InAs or InAs-based heterostructures. We demonstrate that quasi-one-dimensional channels can be formed by micro-laser lithography. The population of subbands is controlled by in-plane gates. Contrary to previous reports, symmetric and asymmetric in-plane gate voltages applied to quasi-one dimensional channels did not show indications of SOI-induced anomalies in the conductance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin and charge transport in double-junction Fe/MgO/GaAs/MgO/Fe heterostructures

We present theoretical and experimental results on tunneling current in single Fe/MgO/GaAs and double Fe/MgO/GaAs/MgO/Fe tunnel junctions. The charge and spin currents are calculated as a function of external voltage for different sets of parameters characterizing the semiconducting GaAs layer. Transport characteristics of a single Fe/MgO/GaAs junction reveal typical diode as well as spin diode features. The results of numerical calculations are compared with current-voltage characteristics measured experimentally for double tunnel junction structures, and a satisfactory agreement of the theoretical and experimental results has been achieved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local droplet etching – Nanoholes, quantum dots, and air-gap heterostructures

Local droplet etching (LDE) allows the self-organized generation of nanoholes in semiconductor surfaces and is fully compatible with molecular beam epitaxy (MBE). The influence of the process parameters as well as of droplet and substrate materials on the LDE nanohole morphology is discussed. Furthermore, recent applications of LDE, the fabrication of quantum dots by hole filling and the creation of air-gap heterostructures are addressed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Scaling of the structural characteristics of nanoholes created by local droplet etching

We study the tuneability of nanoholes created by local droplet etching of AlGaAs surfaces with Al droplets at varied coverage θ of the deposited droplet material and process temperature T. For the contact angle of the as-grown droplets a mean value of 66° is determined, which depends neither on θ nor on T. The experimental results on the hole structural characteristics are interpreted in terms of scaling models yielding a general form f(θ,T)∝θ{sup q}exp(E/[k{sub B}T]), with constants q and E and Boltzmann's constant k{sub B}. In detail, the hole density varies from N = 4.0 × 10{sup 6} up to 1.5 × 10{sup 8} cm{sup −2}, and the scaling parameters are q = 0 and E = E{sub N} = 2.46 eV. The hole diameter varies from 50 up to 190 nm with scaling parameters q = 1/3 and E = −E{sub N}/3. Moreover, the hole depth varies from 9 up to 125 nm with q = 2/3 and E = −1.73 eV. Furthermore, a threshold coverage of at least 0.2 monolayers (ML) must be deposited before hole formation takes place. In situ electron diffraction indicates that these 0.2 ML are consumed for a surface reconstruction change from (3 × 1) to (2 × 1). For coverages above 2.0 ML holes with a bimodal depth distribution are observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ballistic thermal point contacts made of GaAs nanopillars

We measure the thermal conductance of GaAs pillars that are only a few nanometers long. Our observations can be understood with a simple model, in which the pillars constitute thermal point contacts between 3D phonon reservoirs. Moreover, first measurements of the electronic transport through these pillars are presented.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High excitation power photoluminescence studies of ultra-low density GaAs quantum dots

We fabricate GaAs epitaxial quantum dots (QDs) by filling of self-organized nanoholes in AlGaAs. The QDs are fabricated under optimized process conditions and have ultra-low density in the 10{sup 6} cm{sup −2} regime. At low excitation power the optical emission of single QDs exhibit sharp excitonic lines, which are attributed to the recombination of excitonic and biexcitonic states. High excitation power measurements reveal surprisingly broad emission lines from at least six QD shell states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Test results of a prototype dielectric microcalorimeter

The initial development work on a dielectric microcalorimeter is presented. It focuses on the dielectric properties of the ferroelectric material KTa(1-x)Nb(x)O3 (KTN). Measurements of the temperature dependent dielectric constant are given together with the first alpha particle detection results from a prototype composite microcalorimeter operating at 1.3 K. A nonthermal mechanism for detecting 6 MeV alpha particles in a monolithic KTN sample is also reported.

Pfafman, T. E.↗