Search NASA⌕ Search

Engineering topics

Hanson, J C

Publications and source records attributed to Hanson, J C.

The Crystal Structures of two Anhydrous Magnesium Hydroxychloride Phases from in situ Synchrotron Powder Diffraction Data

The crystal structures of two members of the solid solution series Mg(OH){sub x}Cl{sub y}x+y = 2, Mg(OH){sub 1.7}Cl{sub 0.3} (P{sup {bar 3}}m1, a = 3.169(2) {angstrom}, c = 5.530(12), V = 48.1(1) {angstrom}{sup 3} at T = 365 C) and MgOHCl (R{sup {bar 3}}m, a = 3.3877(4) {angstrom}, c = 17.534(4) {angstrom}, V = 174.27(6) {angstrom}{sup 3} at T = 625 C) were determined from in situ synchrotron powder diffraction data at high temperature upon dehydration of 3Mg(OH){sub 2} {center_dot} MgCl{sub 2} {center_dot} 8H{sub 2}O (F3) and 5Mg(OH){sub 2} {center_dot} MgCl{sub 2} {center_dot} 8H{sub 2}O (F5) phases. The crystal structures of Mg(OH){sub 1.7}Cl{sub 0.3} (example of ss-type-OH) and MgOHCl (example of ss-type-Cl) can be related to the C19 (CdCl{sub 2}) and C6 (CdI{sub 2}) structure type, respectively, with the disordered chloride and hydroxide anions occupying the same crystallographic site in layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphological and Structural Changes During the Reduction and Reoxidation of CuO/CeO(2) and Ce(1-x)Cu(x)O(2) Nanocatalysts: In-situ Studies with Environmental TEM, XRD and XAS

We have studied the structural, morphological, and electronic properties of CuO/CeO{sub 2} and Ce{sub 1-x}Cu{sub x}O{sub 2} nanocatalysts during reduction/oxidation cycles using H{sub 2} and O{sub 2} as chemical probes. Time-resolved in situ characterization was performed by X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) as well as aberration-corrected environmental transmission electron microscopy (ETEM). We have found that both types of nanocatalysts reduce to a Cu/CeO{sub 2} biphase system with significant oxygen vacancies in CeO{sub 2}. Important variations are seen in the Cu particle size and metal dispersion depending on the initial state of the copper oxide-ceria systems. During subsequent in situ oxygen annealing, the Cu precipitated from the CuO/CeO{sub 2} system reoxidized to form CuO through a Cu{sub 2}O intermediate phase as expected. However, the Cu precipitated from the Ce{sub 0.8}Cu{sub 0.2}O{sub 2} solid solution behaved rather differently under oxidizing conditions, and neither oxidized to form CuO nor fully returned to a bulk Ce{sub 0.8}Cu{sub 0.2}O{sub 2} phase in solid solution. We found that {approx} 50% of the Cu returned to a Ce{sub 1-x}Cu{sub x}O{sub 2} solid solution, while the remainder was observed by in situ ETEM to form an amorphous copper oxide phase with a Cu oxidation state similar to Ce{sub 1-x}Cu{sub x}O{sub 2}, but with a local bonding environment similar to CuO. The behavior of the reduced Ce{sub 0.8}Cu{sub 0.2}O{sub 2} reflects strong interactions between Cu and the ceria matrix and illustrates the advantages of working with solid solutions of mixed oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Flow-through Reaction Cell that Couples Time-resolved X-ray Diffraction with Stable Isotope Analysis

A non-metallic flow-through reaction cell is described, designed for in situ time-resolved X-ray diffraction coupled with stable isotope analysis. The experimental setup allows the correlation of Cu isotope fractionation with changes in crystal structure during copper sulfide dissolution. This flow-through cell can be applied to many classes of fluid-mineral reactions that involve dissolution or ion exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Activity of Ce1-xNixO2-y for H2 Production through Ethanol Steam Reforming: Tuning Catalytic Performance through Metal↔Oxide Interactions

Ce{sub 0.8}Ni{sub 0.2}O{sub 2-y} is an excellent catalyst for ethanol steam reforming. Metal-oxide interactions perturb the electronic properties of the small particles of metallic nickel present in the catalyst under the reaction conditions and thus suppress any methanation activity. The nickel embedded in ceria induces the formation of O vacancies, which facilitate cleavage of the O-H bonds in ethanol and water.

08 HYDROGEN↗

Combined XRD and XAS

X-ray diffraction (XRD) and X-ray absorption fine structure (XAFS) are complementary techniques for investigating the structure of materials. XRD probes long range order and XAFS probes short range order. We have combined the two techniques at one synchrotron beamline, X18A at the NSLS, allowing samples to be studied in a single experiment. This beamline will allow for coordinated measurements of local and long range structural changes in chemical transformations and phase transitions using both techniques.

43 PARTICLE ACCELERATORS↗

H2 Production Through the Water-gas Shift Reaction: An In situ Time-resolved X-ray Diffraction Investigation of Manganese OMS-2 Catalyst

Manganese oxide octahedral molecular sieve (OMS-2) catalyst prepared by the reflux method was investigated for hydrogen generation via the water-gas shift reaction. Catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), The Brunauer-Emmett-Teller (BET) surface area and determination of average oxidation state (AOS). The OMS-2 catalyst showed very good catalytic activity for the water-gas shift reaction to generate hydrogen under laboratory conditions. An in situ study was conducted to monitor the structural changes in the catalyst during the water-gas shift reaction using synchrotron radiation-based time-resolved X-ray diffraction (TR-XRD). During the water-gas shift reaction, the mixed valent OMS-2 catalyst undergoes a structural transformation to form Mn{sub 2}O{sub 3} and finally to form MnO. The study showed that OMS-2 catalysts can be used as inexpensive catalysts for hydrogen generation.

08 HYDROGEN↗

Unusual Physical and Chemical Properties of Ni in Ce1-xNixO2-y Oxides: Structural Characterization and Catalytic Activity for the Water Gas Shift Reaction

The structural and electronic properties of Ce{sub 1-x}Ni{sub x}O{sub 2-y} nanosystems prepared by a reverse microemulsion method were characterized with synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, Raman spectroscopy, and density functional calculations. The Ce{sub 1-x}Ni{sub x}O{sub 2-y} systems adopt a lattice with a fluorite-type structure with an acute local order where Ni displays a strongly distorted (oxygen) nearest-neighbor coordination and the presence of Ni atoms as first cation distances, pointing to the existence of Ni-O-Ni entities embedded into the ceria lattice. A Ni {leftrightarrow} Ce exchange within the CeO{sub 2} leads to a charge redistribution and the appearance of O vacancies. The Ni?O bonds in Ce{sub 1-x}Ni{sub x}O{sub 2-y} are more difficult to reduce than the bonds in pure NiO. The specific structural configuration of Ni inside the mixed-metal oxide leads to a unique catalyst with a high activity for the water gas shift (CO + H{sub 2}O {yields} H{sub 2} + CO{sub 2}) reaction and a simultaneous reduction of the methanation activity of nickel. Characterization results indicate that small particles of metallic Ni at the interface position of a ceria network may be the key for high WGS activity and that the formate?carbonate route is operative for the production of hydrogen.

08 HYDROGEN↗

Unraveling the Active Site in Copper-ceria Systems for the Water Gas Shift Reaction: In-situ Characterization of an Inverse Powder CeO2-x/CuO-Cu Catalyst

An inverse powder system composed of CeO{sub 2} nanoparticles dispersed over a CuO-Cu matrix is proposed as a novel catalyst for the water-gas shift reaction. This inverse CeO{sub 2}/CuO-Cu catalyst exhibits a higher activity than standard Cu/CeO{sub 2} catalysts. In situ synchrotron characterization techniques were employed to follow the structural changes of CeO{sub 2}/CuO-Cu under reaction conditions. Time-resolved X-ray diffraction experiments showed the transformation of CuO to metallic Cu via a Cu{sub 2}O intermediate. Short-order structural changes were followed by pair distribution function analysis and corroborated the results obtained by diffraction. Moreover, X-ray absorption spectroscopy also revealed oxidation state changes from Cu{sup 2+} to Cu{sup 0} and the partial reduction of CeOx nanoparticles. The activity data obtained by mass spectrometry revealed that hydrogen production starts once the copper has been fully reduced. The strong interaction of ceria and copper boosted the catalytic performance of the sample. The inverse catalyst was active at low temperatures, stable to several reaction runs and to redox cycles. These characteristics are highly valuable for mobile fuel cell applications. The active phases of the inverse CeO{sub 2}/CuO-Cu catalyst are partially reduced ceria nanoparticles strongly interacting with metallic copper. The nature and structure of the ceria nanoparticles are of critical importance because they are involved in processes related to water dissociation over the catalyst surface.

08 HYDROGEN↗

In Situ XRD Studies of ZnO/GaN Mixtures at High Pressure and High Temperature: Synthesis of Zn-Rich (Ga1-xZnx)(N1-xOx) Photocatalysts

The high-pressure, high-temperature conditions for the synthesis of Zn-rich (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid solutions from mixtures of ZnO/GaN were explored using synchrotron-based in situ time-resolved X-ray diffraction (XRD). Following a new synthetic path, (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid solutions with a Zn content up to 75% were prepared for the first time. The structures of the (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid solutions were characterized by XRD and X-ray absorption fine structure (XAFS) analyses and were in excellent agreement with the predictions of density functional calculations. These materials adopt a wurtzite crystal structure with metal-N or metal-O bond distances in the range of 1.95-1.98 {angstrom}. Although the (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid solutions seem to be stable over the full range of compositions, no ideal solid solution formation was observed. In all cases, the lattice parameters were larger than those of ideal solid solutions. The variation of the lattice parameter c showed an upward double bowing curve, as was predicted by theoretical calculations. Also, no ideal behavior was observed in the electronic properties of the (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid solutions. X-ray absorption spectra at the Zn and Ga K-edges of the (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) systems showed significant electronic perturbations with respect to ZnO and GaN. The synthesized (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid solution with a Zn content of 50% displayed the ability to absorb visible light well above 500 nm. This material has a great potential for splitting water under visible light irradiation. The availability of (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid solutions with a high Zn content opens the door to fully explore the application of these materials in photocatalysis.

36 MATERIALS SCIENCE↗

Inverse CeO2/CuO Catalyst as an Alternative to Classical Direct Configurations for Preferential Oxidation of CO in Hydrogen-Rich Stream

A novel inverse CeO{sub 2}/CuO catalyst for preferential oxidation of CO in H{sub 2}-rich stream (CO-PROX) has been developed on the basis of a hypothesis extracted from previous work of the group (JACS 2007, 129, 12064). Possible separation of the two competing oxidation reactions involved in the process (of CO and H{sub 2}, respectively) is the key to modulation of overall CO-PROX activity and is based on involvement of different sites as most active ones for each of the two reactions. Achievement of large size CuO particles and adequate CeO{sub 2}-CuO interfacial configurations in the inverse catalyst apparently allows appreciable enhancement of the catalytic properties of this kind of system for CO-PROX, constituting an interesting alternative to classic direct configurations so far explored for this process. Reasons for such behavior are analyzed on the basis of operando-XRD, -XAFS, and -DRIFTS studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ Characterization of CuFe2O4 and Cu/Fe3O4 Water-Gas Shift Catalysts

Mixtures of copper and iron oxides are used as industrial catalysts for the water-gas shift (WGS, CO + H2O → H2 + CO2). In-situ time-resolved X-ray diffraction, X-ray absorption fine structure, and atomic pair distribution function analysis were used to study the reduction of CuFe2O4 with CO and the behavior of CuFe2O4 and Cu/Fe2O3 catalysts under WGS reaction conditions. Metal↔oxygen↔metal interactions enhance the stability of Cu2+ and Fe3+ in the CuFe2O4 lattice, and the mixed-metal oxide is much more difficult to reduce than CuO or Fe2O3. Furthermore, after heating mixtures of CuFe2O4/CuO in the presence of CO or CO/H2O, the cations of CuO migrate into octahedral sites of the CuFe2O4 lattice at temperatures (200-250 oC) in which CuO is not stable. Above 250 oC, copper leaves the oxide, the occupancy of the octahedral sites in CuFe2O4 decreases, and diffraction lines for metallic Cu appear. From 350 to 450 oC, there is a massive reduction of CuFe2O4 with the formation of metallic Cu and Fe3O4. At this point, the sample becomes catalytically active for the production of H2 from the reaction of H2O with CO. Neutral Cu0 (i.e. no Cu+1 or Cu+2 cations) is the active species in the catalysts, but interactions with the oxide support are necessary in order to obtain high catalytic activity. These studies illustrate the importance of in-situ characterization when dealing with mixed-metal oxide WGS catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Sulfation Level on the Desulfation Behavior of Presulfated Pt-BaO/Al2O3 Lean NOx Trap Catalysts: A Combined H2 Temperature-Programmed Reaction, in Situ Sulfur K-Edge X-ray Absorption Near-Edge Spectroscopy, X-ray Photoelectron Spectroscopy, and Time-Resolved X-ray Diffraction Study

Desulfation by hydrogen of presulfated Pt (2 wt %)-BaO(20 wt %)/Al{sub 2}O{sub 3} with various sulfur loading (S/Ba = 0.12, 0.31, and 0.62) were investigated by combining H{sub 2} temperature programmed reaction (TPRX), X-ray photoelectron spectroscopy (XPS), in situ sulfur K-edge X-ray absorption near-edge spectroscopy (XANES), and synchrotron time-resolved X-ray diffraction (TR-XRD) techniques. We find that the amount of H{sub 2}S desorbed during the desulfation in the H{sub 2} TPRX experiments is not proportional to the amount of initial sulfur loading. The results of both in situ sulfur K-edge XANES and TR-XRD show that at low sulfur loadings, sulfates were transformed to a BaS phase and remained in the catalyst rather than being removed as H{sub 2}S. On the other hand, when the deposited sulfur level exceeded a certain threshold (at least S/Ba = 0.31) sulfates were reduced to form H{sub 2}S, and the relative amount of the residual sulfide species in the catalyst was much less than at low sulfur loading. Unlike samples with high sulfur loading (e.g., S/Ba = 0.62), H{sub 2}O did not promote the desulfation for the sample with S/Ba of 0.12, implying that the formed BaS species originating from the reduction of sulfates at low sulfur loading are more stable to hydrolysis. The results of this combined spectroscopy investigation provide clear evidence to show that sulfates at low sulfur loadings are less likely to be removed as H{sub 2}S and have a greater tendency to be transformed to BaS on the material, leading to the conclusion that desulfation behavior of Pt-BaO/Al{sub 2}O{sub 3} lean NO{sub x} trap catalysts is markedly dependent on the sulfation levels.

08 HYDROGEN↗

Hydrothermal synthesis of nanocrystalline ZnSe: An in situ synchrotron radiation X-ray powder diffraction study

The hydrothermal synthesis of nanocrystalline ZnSe has been studied by in situ X-ray powder diffraction using synchrotron radiation. The formation of ZnSe was studied using the following starting mixtures: Zn+Se+H{sub 2}O (route A) and ZnCl{sub 2}+Se+H{sub 2}O+Na{sub 2}SO{sub 3} (route B). The route A experiment showed that Zn powder starts reacting with water at 134 deg. C giving ZnO and H{sub 2} followed by the formation of ZnSe which takes place in temperature range from 167 to 195 deg. C. The route B experiment shows a considerably more complex reaction path with several intermediate phases and in this case the formation of ZnSe starts at 141 deg. C and ZnSe and Se were the only crystalline phases observed at the end of the experiment where the temperature was 195 deg. C. The sizes of the nanocrystalline particles were determined to 18 and 9 nm in the route A and B experiments, respectively. Nanocrystalline ZnSe was also synthesized ex situ using the route A and B methods and characterized by conventional X-ray powder diffraction and transmission electron microscopy. An average crystalline domain size of ca. 8 nm was determined by X-ray powder diffraction in fair agreement with TEM images, which showed larger aggregates of nanoparticles having approximate diameters of 10 nm. Furthermore, a method for purification of the ZnSe nanoparticles was developed and the prepared particles showed signs of anisotropic size broadening of the diffraction peaks. - Graphical abstract: Stack of powder diagrams showing the formation of nanocrystalline ZnSe under hydrothermal conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A versatile sample-environment cell for non-ambient x-ray scattering experiments.

A compact reaction cell is described for in-situ experiments requiring control of both the temperature of the sample and the atmosphere over the sample. The cell incorporates an optional furnace capable of temperatures of up to {approx} 1273 K. The compact design and ability of the cell to mount directly on a standard goniometer head allows portability to a large number of diffraction instruments at synchrotron sources.

43 PARTICLE ACCELERATORS↗