Search NASA⌕ Search

Engineering topics

Harbert, William

Publications and source records attributed to Harbert, William.

25 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

CO 2 induced changes in Mount Simon sandstone: Understanding links to post CO 2 injection monitoring, seismicity, and reservoir integrity

The purpose of this study is to quantify geochemical reactions of CO 2 and brine with subsurface samples taken from the Mt. Simon sandstone and identify any potential alterations of the geomechanical rock properties that could lead to changes observable in seismic monitoring or result in changes of micro seismicity such as those observed at the Illinois Basin-Decatur Project (IBDP) site. Two Mt. Simon sandstone samples from 6919.3 feet (2109.0 m) and 6926.1 feet (2111.1 m) depth were exposed to supercritical CO 2 (scCO 2 ) dissolved in brine at in-situ reservoir conditions for one month. Geochemical, spectral, scanning electron microscopy, and petrophysical methods were used to analyze the samples before and after the one-month exposure. Significant changes were observed. Multiple geomechanical properties were chosen to form the framework against which to interrogate the petrophysical data: Young’s modulus (E), Poisson’s ratio (ν), lambda·rho (λρ), and mu·rho (μρ). In this study we conclude that framework composition, porosity, heterogeneities, effective pressure, and reactive geochemistry are first order controls on trends in the E-μ and λρ-μρ cross plot spaces. Changes in porosity, permeability, dynamic moduli, and brittleness with exposure to these fluids were observed. No change in ultrasonic P-wave attenuation (Q P ) was observed. Geochemical alteration causes a distinct shift in λρ-μρ in both samples as well as changes in E, ν, and P and S wave seismic velocity values. Furthermore, these observations could provide insight into subsurface monitoring using seismic methods including amplitude variation with offset (AVO) classification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Long-Period, Long-Duration Seismic Events and Their Probable Role in Reservoir Stimulation and Stage Productivity

Hydraulic fracturing is a well-established technique to extract gas or liquid hydrocarbons from low-permeability formations like shale and tight gas reservoirs. Diffusion of hydrofracturing fluid outward from the stimulated fractures into the target formation produces slip across preexisting fractures and other discontinuities in the rock. Microseismic events recorded by downhole seismic monitoring arrays are a manifestation of associated deformation. Recent investigations suggest that the total cumulative seismic moment of microearthquakes during hydraulic fracturing is only a small portion of the total seismic energy release expected for the fluid volume injected into the formation. These observations suggest that other sources of energy release (such as inelastic deformation), contemporaneous with microseismicity, should be considered as relevant to the hydraulic fracturing process. Recent observations on long period, long duration (LPLD) seismic events suggest that slow slip emission along weaknesses that are misaligned with respect to the present-day stress field are likely an important mechanism of deformation and should be better understood and quantified in reservoir stimulations. In Morgantown, West Virginia, we carried out seismic monitoring of hydraulic fracturing activity using an array of five broadband, three-component surface seismometers. Using this network, we identified 89 high-amplitude, impulsive events and 436 long period, long duration (LPLD) events, with highly emergent waveform characteristics. In these interpreted LPLD events, we observed a significant concentration of energy in the 0.8-3 Hz frequency range. During hydraulic fracturing, LPLD events were found to occur most frequently when the pumping pressure and rate were at or near maximum values. As the main purpose of hydraulic fracturing is to stimulate oil and gas production from the less permeable reservoir, we compared the relative production contribution per stage to the frequency of occurrence of suspected LPLD events. We found positive correlation between the frequency of LPLD events and stage-by-stage gas production, highlighting the potential contribution of slow deformation processes and its effectiveness in the reservoir stimulation.

58 GEOSCIENCES↗
DOE OSTI2018

Surface Seismic Monitoring of Hydraulic Fracturing Test Site (HFTS) in the Midland Basin, Texas

Low-frequency seismic events of long duration were recorded by a surface array of 48, 3-component geophones during the fracture stimulation of two offset horizontal wells in the Middle Wolfcamp Formation (8000-8100 ft. below the geophone array) at the Hydraulic Fracturing Test Site (HFTS) in Reagan County, TX. Each recorded event was approximately 5-10 seconds long, with no clear first wave arrival; the seismic energy was largely visible on the vertical component suggesting that the events are dominated by P waves. A finite temporal moveout was observed across the seismic network in event arrival times indicating a causal relationship with the local source of deformation. The low-frequency seismic events observed in this study can be distinguished from the more commonly known microseismic events by their: 1) emergent waveform, 2) lack of clear P wave and S wave arrivals, 3) longer duration (few seconds), and 4) lower-frequency energy content (10-60 Hz). Previous researchers have observed similar low-frequency, long duration events in conjunction with the hydraulic fracturing of hydrocarbon reservoirs and have referred to them as long-period, long-duration (LPLD) events in the literature. LPLD events may be important to a comprehensive understanding of fracture stimulation because these events are thought to represent: 1) movement along pre-existing discontinuities such as bedding planes and fractures/faults, 2) deformation of ductile rocks with high clay content, and 3) the jerky tensile opening of hydraulic fractures. LPLD events resulting from slow shear-slip on faults and fractures of relatively larger dimension or rupture in the clay rich rock are collectively referred to as slow-slip seismicity, which was first observed in tectonic and volcanic settings, areas with high pore pressure like hydraulically fractured reservoirs. Because LPLDs are thought to represent deformation mechanisms not captured by microseismic analysis (which dominantly indicate shear failure of brittle rock), we believe that incorporating LPLD events into a new methodology for delimiting stimulated reservoir volume might improve predictions of well production.

Kumar, Abhash↗
DOE OSTI2018

Risk Reduction of CO 2 Storage with Stochastic Simulations

The purpose of this project was to create an efficient and flexible tool based on principal component analysis (PCA) for a generation of differentiable realizations of porosity and permeability fields. Of particular interest were data which had significant connectivity between patches of the same rock type, which is called “binary”. The efficiency requirement needed a so called kernel PCA, and the binary images were found with the method called optimization based PCA (OPCA) for which interpretation is provided. The ability to honor given data at particular locations is also incorporated. The tool worked very well and efficiently for two dimensional (2-D) simulations. Furthermore, the tool was applied to a three-dimensional (3-D) dataset and determined that conditioning can be used to maintain the connectivity between vertical layers.

47 OTHER INSTRUMENTATION↗