Search NASA⌕ Search

Engineering topics

Harris, A.

Publications and source records attributed to Harris, A..

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

W-band Heterodyne Receiver Module with 27 K Noise Temperature

We present noise temperature and gain measurements of a W-band heterodyne module populated with MMIC LNAs designed and fabricated using 35nm InP HEMT process. The module has a WR-10 waveguide input. GPPO connectors are used for the LO input and the I and and Q IF outputs. The module is tested at both ambient (300 K) and cryogenic (25 K) temperatures. At 25 K physical temperature, the module has a noise temperature in the range of 27-45 K over the frequency band of 75-111 GHz. The module gain varies between 15 dB and 27 dB. The band-averaged module noise temperature of 350 K and 33 K were measured over 80-110 GHz for the physical temperature of 300 K and 25 K, respectively. The resulting cooling factor is 10.6.

heterodyne module↗
NASA NTRS2004

Broadband Heterodyne SIS Spectrometer Prototype: First Results

The broadband heterodyne SIS receiver system described elsewhere (reference 1) has been assembled and tested both in the laboratory and during two observing runs on the Cassegrain focus of the 10 meter telescope at the Caltech Submillimeter Observatory on Mauna Kea, Hawaii. Here we present a brief summary of the initial results.

Rice, F.↗
NASA NTRS2004

SIS Mixer Design for a Broadband Millimeter Spectrometer Suitable for Rapid Line Surveys and Redshift Determinations

We present some detail of the waveguide probe and SIS mixer chip designs for a low-noise 180-300 GHz double- sideband receiver with an instantaneous RF bandwidth of 24 GHz. The receiver's single SIS junction is excited by a broadband, fixed-tuned waveguide probe on a silicon substrate. The IF output is coupled to a 6-18 GHz MMIC low- noise preamplifier. Following further amplification, the output is processed by an array of 4 GHz, 128-channel analog autocorrelation spectrometers (WASP 11). The single-sideband receiver noise temperature goal of 70 Kelvin will provide a prototype instrument capable of rapid line surveys and of relatively efficient carbon monoxide (CO) emission line searches of distant, dusty galaxies. The latter application's goal is to determine redshifts by measuring the frequencies of CO line emissions from the star-forming regions dominating the submillimeter brightness of these galaxies. Construction of the receiver has begun; lab testing should begin in the fall. Demonstration of the receiver on the Caltech Submillimeter Observatory (CSO) telescope should begin in spring 2003.

Rice, F.↗
NASA NTRS1994

DDC Systems for Searching for Near-Earth Asteroids

Large format CCD systems are superior to photographic systems in terms of quantum efficiency and that they yield digital output directly, which can be computer analyzed to detect moving objects and to obtain astrometric measurements.

telescopes↗
NASA NTRS1993

Tumbling Asteroids

Burns and Safronov estimated the damping timescale of rotational wobble for asteroids, and concluded that all asteroid rotations then known should be damped to a state of principal-axis rotation about the axis of maximum moment of inertia.

very↗
NASA NTRS1984

Design of an orbital heating simulator using IR techniques

The design of an IR rig to supply and monitor radiation fluxes in order to verify a thermal math model is discussed. The design incorporates IR lamps, Calrods and baffles to best suit the requirements of the specific zones. The required fluxes are calculated from the IR lamp/Calrod configuration software which can account for the effect of specular baffles and surface absorptivities. Radiation intensities are measured using the absorbed flux technique. Sensors, with surface properties matched to the appropriate spacecraft zone, are calibrated under conditions identical to test. The rig itself is capable of reproducing all test conditions and is versatile enough to handle other spacecrafts.

Donato, M.↗
NASA NTRS1977

Are striations on Phobos evidence for tidal stress

A series of striations or grooves over a great part of the surface of Phobos, the inner satellite of Mars, can be observed on Viking orbiter photographs. It is suggested that some of these features are related to a readjustment of the satellite's figure with increasing tidal stress as the orbit evolves inwards under the action of tidal friction. If the width of the grooves is in fact due to tidal readjustments of the figure of Phobos, then the older craters should be systematically deformed from their initial nearly circular shapes.

Soter, S.↗
NASA NTRS1977

The equilibrium figures of Phobos and other small bodies

Computations of figures of hydrostatic equilibrium for isolated rotating bodies are discussed. It is shown that the theoretical figure of equilibrium for Phobos is a triaxial ellipsoid whose a and b axes differ by about 25% and that this difference is less than 2% for Deimos. A density of less than 3.9 g/cu cm is estimated for Phobos. Equilibrium figures are also examined for the inner satellites of Jupiter and Saturn as well as for small asteroids.

Soter, S.↗