Engineering topics

Harris, Linden

Publications and source records attributed to Harris, Linden.

4 records

NASA NTRS2015

Results of the GCMS Effluent Gas Analysis for the Brine Processing Test

The effluent gas for the Paragon Ionomer Water Processor (IWP), UMPQUA Ultrasonic Brine Dewatering System (UBDS), and the NASA Brine Evaporation Bag (BEB) were analyzed using Headspace GCMS Analysis in the recent AES FY14 Brine Processing Test. The results from the analysis describe the number and general chemical species of the chemicals produced. Comparisons were also made between the different chromatograms for each system, and an explanation of the differences in the results is reported.

GCMS↗

NASA NTRS2015

Evaluation of Brine Processing Technologies for Spacecraft Wastewater

Brine drying systems may be used in spaceflight. There are several advantages to using brine processing technologies for long-duration human missions including a reduction in resupply requirements and achieving high water recovery ratios. The objective of this project was to evaluate four technologies for the drying of spacecraft water recycling system brine byproducts. The technologies tested were NASA's Forward Osmosis Brine Drying (FOBD), Paragon's Ionomer Water Processor (IWP), NASA's Brine Evaporation Bag (BEB) System, and UMPQUA's Ultrasonic Brine Dewatering System (UBDS). The purpose of this work was to evaluate the hardware using feed streams composed of brines similar to those generated on board the International Space Station (ISS) and future exploration missions. The brine formulations used for testing were the ISS Alternate Pretreatment and Solution 2 (Alt Pretreat). The brines were generated using the Wiped-film Rotating-disk (WFRD) evaporator, which is a vapor compression distillation system that is used to simulate the function of the ISS Urine Processor Assembly (UPA). Each system was evaluated based on the results from testing and Equivalent System Mass (ESM) calculations. A Quality Function Deployment (QFD) matrix was also developed as a method to compare the different technologies based on customer and engineering requirements.

recycling↗

NASA NTRS2014

Processing of Packing Foams Using Heat Melt Compaction

Foam is used extensively as packing material for items sent to the International Space Station (ISS). Although lightweight, foam is bulky and can occupy a large fraction of the limited ISS volume. Four chemically distinct foams have been used on the ISS. In descending order of current usage, these are Plastazote Zotek Minicel Pyrell. Processing foam with the Heat Melt Compactor (HMC), a solid waste treatment system, has been proposed to reduce the volume of foams stored on spacecraft. Prior to HMC testing, Thermogravimetric Analyses were conducted on the four foams as a precaution to ensure that the thermal decomposition temperatures were not within range of HMC operation (180C). Pyrell was not tested with the HMC because it is known to release toxic compounds and comprises less than 1.5 of total foam usage on ISS resupply flights. Zotek, Minicel, Plastazote LD24FR (low density), and Plastazote LD45FR (high density) were processed with the HMC at 130, 150 and 170C. Volume was reduced by 82.6 on average (n19; std dev4.88). Hydrocarbons and several other compounds emitted during foam processing were measured using a Total Hydrocarbon Analyzer and FTIR. Effects of process temperature and foam type on exhaust composition are discussed. Feeding of foams into the limited size opening of the HMC compaction chamber is likely to be a challenge, particularly in microgravity. Some suggestions are proposed to facilitate feeding foam into the HMC. Processing packing foam with the HMC has been shown to substantially reduce foam volume, and also has the potential benefit of producing radiation-shielding foam tiles.

Harris, Linden↗

NASA NTRS2013

Characterization of Heat Melt Compactor (HMC) Product Water

The Heat Melt Compactor (HMC) is designed to sterilize and process wastes produced during space missions. Benefits of the HMC include reduction of biohazards to the crew, reduction in volume of wastes that would otherwise require storage, production of radiation shielding tiles, and recovery of water and other resources. Water reuse is critical onboard spacecrafts; it reduces the need for resupply missions and saves valuable storage space. The main sources of water in HMC batches are food, beverages, shampoo, disinfecting wipes, toothpaste, and diapers. Water reclaimed by the HMC was analyzed for concentrations of Na+, NH4+, K+, Mg2+, Ca2+, Cl-‐, NO2-‐, Br-‐, NO3-‐, PO43-‐, SO42-‐, total organic carbon (TOC), total inorganic carbon (TIC), % total solids, and pH. The data are discussed in relation to the current water input characteristics established for the International Space Station Water Processor Assembly system. Batches with higher than average amounts of food produced HMC product water with higher sulfate content, and batches with higher proportions of disinfectant wipes and food yielded HMC product water with higher ammonium concentration. We also compared theoretical chemical composition of HMC product water based on food labels and literature values to experimental results.

Heat Melt Compactor↗