Search NASA⌕ Search

Engineering topics

Harrison, Alan Kent

Publications and source records attributed to Harrison, Alan Kent.

A hydride model for solid and liquid cerium ejecta particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a rough surface or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle. Two models are developed to capture the heat and mass transfer that occurs during this process. One model assumes that for larger solid ejecta particles, the loss of mass is negligible while for smaller liquid ejecta particles, the loss of mass during reaction is accounted for. The loss of mass is assumed to occur from the hydride layer being extremely brittle and the fact that it will be relatively easy for the hydride material on the outside of the particle to go into tension, crack and flake off. The model is tested by performing simulations similar to the original experiments that motivated the development of these models and comparing the particle temperatures. While the model is able to capture some general features of the flowfield, inaccuracies clearly exist that must be addressed and the results underscore the need for more isolated experiments where fewer assumptions and physical processes are present simultaneously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A simple hydride model for cerium ejecta particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a known roughness or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle relative to the gas. A simple model is developed, assuming that the particle remains intact and spherical, to capture the heat and mass transfer that occurs during this process. Model performance is evaluated by comparing with cerium ejecta experiments where the particles are ejected into deuterium gas at initial pressures of 4 and 8 atm. Overall, the model is able to capture the approximately 400 K increase in particle temperature above the surrounding gas temperature.

36 MATERIALS SCIENCE↗

Analytic solutions for Asay foil trajectories with implications for ejecta source models and mass measurements

We consider the trajectory of an Asay foil ejecta diagnostic for scenarios where ejecta are produced at a singly shocked planar surface and fly ballistically through a perfect vacuum to the sensor. We do so by building upon a previously established mathematical framework derived for the analytic study of stationary sensors. First, we derive the momentum conservation equation for the problem, in a form amenable to accelerating sensors, in terms of a generic ejecta source model. The result is an integrodifferential equation of motion for the foil trajectory. This equation yields an easily calculable closed-form implicit solution for the foil trajectory in instant-production scenarios. From there, we derive a boundary condition that particle velocity distributions must satisfy if their associated foil trajectories are to exhibit a smooth initial acceleration, as occurs in some experiments. This condition is identical to one derived previously from a consideration of piezoelectric voltage data obtained in similar experiments. We also compare techniques for inferring accumulated ejecta masses from foil trajectories, first by deriving the exact solution, and then by quantifying the error imposed by a frequently used approximate solution (both subject to the assumption of instantaneous ejecta production). Finally, we examine the common practice of presenting inferred cumulative ejecta masses as a function of implied ejecta velocity, establishing the conditions under which this methodology is most meaningful.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Notes on Asay Foil Analysis

As is the norm for momentum diagnostic analyses (i.e., both piezopin and Asay foil measurements), we begin by assuming all particles are created instantaneously at the moment of shock breakout; that all particles move collinearly through a perfect vacuum from source to sensor with a long mean free path to scattering (i.e., so that particle velocities and areal masses do not change in flight); and that the particles collide perfectly inelastically with the sensor. We also assume the foil supports have a negligible effect on the trajectory, as has been demonstrated experimentally, and the foil is sufficiently thin that corrections for thick-plate effects (e.g., time delays between particle impacts on the collecting side and velocity changes on the probe side) can be disregarded. We seek an exact analytic treatment of an ideal system that perfectly embodies these characteristics.

36 MATERIALS SCIENCE↗

A simple hydride model for cerium ejecta particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a known roughness or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle relative to the gas. A simple model is developed, assuming that the particle remains intact and spherical, to capture the heat and mass transfer that occurs during this process. Model performance is evaluated by comparing with cerium ejecta experiments where the particles are ejected into deuterium gas at initial pressures of 4 and 8 atm. Overall, the model is able to capture the approximately 400 K increase in particle temperature above the surrounding gas temperature.

36 MATERIALS SCIENCE↗

A Simple Hydride Model for Cerium Ejecta Particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a known roughness or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle relative to the gas. A simple model is developed, assuming that the particle remains intact and spherical, to capture the heat and mass transfer that occurs during this process. Model performance is evaluated by comparing with cerium ejecta experiments where the particles are ejected into deuterium gas at initial pressures of 4 and 8 atm. Overall, the model is able to capture the approximately 400 K increase in particle temperature above the surrounding gas temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗