Search NASA⌕ Search

Engineering topics

Hartmann, Thomas

Publications and source records attributed to Hartmann, Thomas.

40 records · Page 3

Synthesis and characterization of zirconia-magnesia inert matrix fuel: Uranium homolog studies

X-ray powder diffraction, X-ray fluorescence, microscopy, X-ray absorption fine structure, and electron probe microanalysis were used to characterize ZrO 2 –MgO inert matrix fuel containing UO 2 (as a fissile element and a Pu homolog) and Er 2 O 3 as a burnable poison. A large composition range of MgO and ZrO 2 was evaluated to determine total concentrations, local environment, phases present, phase mixing, and phase composition. It was found that most compositions of the material consist of two phases: MgO (periclase) and ZrO 2 (cubic zirconia). The zirconia phase incorporates up to 5% (wt/wt) MgO and up to 20% and 10% (wt/wt) UO 2 and Er 2 O 3 respectively. This allows the fissile material and burnable poison to be incorporated into the zirconia crystal structure and defines the limits of this isomorphic substitution. The bond deformation due to the isomorphic substitution of uranium was determined by X-ray absorption fine structure. The MgO phase remains pure, which will enable design optimization of the overall thermophysical properties of the inert matrix fuel in regard to thermal diffusivity and thermal conductivity. This characterization data will be used in future studies to correlate the dissolution behavior of inert matrix material containing plutonium.

Holliday, Kiel↗

Low temperature route to uranium nitride

A method of preparing an actinide nitride fuel for nuclear reactors is provided. The method comprises the steps of a) providing at least one actinide oxide and optionally zirconium oxide; b) mixing the oxide with a source of hydrogen fluoride for a period of time and at a temperature sufficient to convert the oxide to a fluoride salt; c) heating the fluoride salt to remove water; d) heating the fluoride salt in a nitrogen atmosphere for a period of time and at a temperature sufficient to convert the fluorides to nitrides; and e) heating the nitrides under vacuum and/or inert atmosphere for a period of time sufficient to convert the nitrides to mononitrides.

Burrell, Anthony K↗

Phase Characteristics of a U-22Pu-4Am-2Np-40Zr Metallic Alloy Containing Rare Earths

Metallic fuel alloys consisting of uranium, plutonium, and zirconium with minor additions of americium and neptunium are under evaluation for potential use to transmute long-lived transuranic actinide isotopes in fast reactors. The current irradiation test series design, designated AFC2, includes minor additions of rare earth elements to simulate expected fission product carryover from the electrochemical molten salt reprocessing technique. The as-cast fuel alloys have been investigated for phase and thermal properties, specifically, enthalpies of transition, transition temperatures, and room temperature phase characteristics. Results and observations related to these characteristics for the “fresh” fuel alloys are provided. The alloy compositions are based on a U 30Pu 5Am-3Np-20Zr alloy, along with additions of 1 and 1.5 wt% RE (at the expense of uranium) where RE denotes rare earth alloy of cerium, lanthanum, praseodymium, and neodymium). Phase behavior and associated transitions have been compared to available U-Pu-Zr ternary diagrams with acceptable agreement. Enthalpies of transition were deconvoluted from heating and cooling thermal traces for relatively reliable values. The rare earth additions to the base alloy have a minimal influence on the room temperature phases present and phase transition temperatures, but the room temperature phases present did impact the enthalpies of transition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructural Characteristics of DU-xMo Alloys with x = 7-12wt%

Microstructural, phase, and impurity analyses of six depleted uranium-molybdenum alloys were obtained using optical metallography, x-ray diffraction, and carbon/nitrogen/oxygen determination. Uranium-molybdenum alloy foils are currently under investigation for the possible conversion of high-power research reactors to accommodate the use of low-enriched uranium fuel. Understanding basic microstructural behavior of these foils is an important consideration in determining the impact of fabrication processes and in anticipating performance of the foils in a reactor. Average grain diameter decreased with increasing molybdenum content, while the degree of mechanical deformation banding increased with increasing molybdenum content. A lattice parameter, which provided information on stress-corrosion cracking behavior, decreased with increasing molybdenum content, and no significant degree of crystallographic ordering was caused by processing and post-processing conditions employed in this study. Impurity concentration, specifically carbon when it is in solution with the host matrix, inhibited the degree of microstructural recrystallization but did not appear to impact other microstructural traits, such as ?-phase retention or lattice parameter.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗