Search NASA⌕ Search

Engineering topics

Harvey, James

Publications and source records attributed to Harvey, James.

Optimization of the Processing of Mo Disks

The objective of this work is to decrease the processing time for irradiated disks of enriched Mo for the production of 99 Mo. Results are given for the dissolution of nonirradiated Mo disks, optimization of the process for large-scale dissolution of sintered disks, optimization of the removal of the main side products (Zr and Nb) from dissolved targets, and dissolution of irradiated Mo disks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Meeting report for the 1st skin microbiota workshop, Boulder, CO, October 15-16, 2012

This report details the outcome of the 1st Skin Microbiota Workshop, Boulder, CO, held on October 15th-16th 2012. The workshop was arranged to bring Department of Defense personnel together with experts in microbial ecology, human skin physiology and anatomy, and computational techniques for interrogating the microbiome to define research frontiers at the intersection of these important areas. The workshop outlined a series of questions and created several working groups to address those questions, specifically to promote interdisciplinary activity and potential future collaboration. The US Army provided generous grant support and the meeting was organized and hosted by the University of Colorado at Boulder. A primary forward vision of the meeting was the importance of understanding skin microbial communities to improve the health and stealth of US Army warfighters.

59 BASIC BIOLOGICAL SCIENCES↗

Irradiation of HDPE Bottles

The short-term plan of NorthStar Medical Technologies for production of Mo-99 is to use the research reactor at the University of Missouri in Columbia (MURR). The Mo-99 will be produced by the activation reaction Mo-98(n, Υ) Mo-99 using enriched Mo-98 targets. There is a concern about the radiation stability of the high-density polyethylene (HDPE) bottles to be used to move the Mo product from the MURR recovery hot cell to the dispensing cell. Therefore, Argonne performed an experimental study to measure the radiation stability of the HDPE bottles, which can be used to transfer ~450 Ci of Mo-99. The first part of the study was to calculate that the dose the bottle will receive over two weeks with starting activity of 450 Ci of Mo-99. Then, irradiation experiments were performed with a Van de Graaff electron generator.

HDPE Bottle↗

Recovery of Mo for Accelerator Production of Mo-99 Using (y,n) Reaction on Mo-100

Technetium-99m is a widely used radiopharmaceutical. Its parent, Mo-99, is produced worldwide to supply this important isotope. One means to produce Mo-99 is by bombarding a Mo-100 target with an electron beam from a linear accelerator; the γ/n reaction on Mo-100 produces Mo-99. After dissolving Mo-100 enriched disks in hydrogen peroxide, the solution is converted to potassium molybdate (0.2 g-Mo/mL) in 5 M KOH. After milking the Tc-99m in the TechneGen generator over a period of 7-10 days, the molybdenum solution needs to be treated to recover valuable Mo-100 for production of sintered Mo disks. However, during the production of Mo-99 by (γ, n) reaction on the Mo-100 target, several byproducts are formed. Therefore, recycling Mo will require the conversion of K 2 MoO 4 in 5 M KOH solution to MoO 3 powder, and purification from other metals present in the Mo solution. The starting Mo-100 enriched material contains less than 20 mg of potassium in 1 kg of molybdenum (<20 ppm). However, after dissolving the irradiated Mo-100 target in hydrogen peroxide and converting it to K 2 MoO 4 in 5 M KOH (0.2 g-Mo/mL), the solution contains about 1.8 kg of potassium per kilogram of molybdenum. The most challenging separation for this recovery step is purifying molybdenum from potassium. One requirement to facilitate the acceptance of the recycled material by the U.S. Food and Drug Administration (FDA) is that the impurities in the recycled material need to be at or below the levels present in the starting material. Therefore, the amount of potassium (K) in purified MoO 3 powder should be below 20 ppm; this will require a decontamination factor for removal of K to be ~1 × 10 5 . Such a low K-contamination level will also prevent the production of large amounts of K-42 during irradiation of Mo-100. Based on economic concerns (due to the significant cost of enriched Mo-100) recycling Mo requires the conversion of K 2 MoO 4 in a 5 M KOH solution to MoO 3 powder with high Mo recovery yields (>98%).

Tkac, Peter↗

Processing of Sintered Mo Disks Using Hydrogen Peroxide

Dissolution studies performed on NorthStar and ORNL disks show that an increase in sintering temperature has a negative effect on dissolution rates in 30% hydrogen peroxide. This is due to changes in the microstructure of sintered Mo powder. At higher sintering temperatures, the powder particles coalesce, form diffusion bonds, and grow into larger grains, which reduce the open porosity of the disks. The remaining porosity becomes trapped within the grains, and therefore the dissolution rates are very low. We also observed that different starting materials lead to different dissolution properties, and in some cases, even high sintering temperature at 1600°C does not produce disks with high packing densities. Studies with NorthStar disks showed that increased packing density can be achieved by increased pressing conditions without affecting the dissolution rates if mild sintering conditions are used. Future experiments will focus on producing sintered Mo disks produced from recovered Mo material and on optimizing the sintering process to produce disks with >90% packing density and good dissolution rates.

Dissolution↗

Dissolution of Sintered Mo Disks

Processing of irradiated Mo-target disks from the production of Mo-99 using the ($\gamma$, n) reaction on Mo-100 must be rapid, due to the relatively short half-life of Mo-99 (T = 66 hr). Approximately 1% of Mo-99 is lost every hour due to its decay. Two potential methods for processing Mo-target disks have been proposed previously as good candidates: (1) electrochemical dissolution in hydroxide solution (Dale et al. 2010); and (2) dissolution in hydrogen peroxide (Dale et al. 2010; Chemerisov et al. 2011). The main disadvantage of the electrochemical approach was the passivation of the disks during dissolution, which required the addition of hydrogen peroxide. In addition, it was hard to maintain good electrical contact with the Mo disks as the dissolution progressed and the disks shrank. Therefore, more focus was put on processing Mo disks in hydrogen peroxide, because some initial results using sintered Mo disks were very promising (Dale et al. 2010; Chemerisov et al. 2011). We report experimental results on processing of sintered Mo disks in 30% hydrogen peroxide. The advantage of this approach is that, after the dissolution of the disks, potassium hydroxide can be added to form potassium molybdate, and excess hydrogen peroxide can be easily destroyed by heating. Dissolution studies of Mo sintered disks were performed in order to better understand how the disks’ properties can affect the dissolution rates. From the production point of view, it is desirable to have the highest-density target; putting more Mo-100 in the accelerator beam would lead to a higher Mo-99 yield. However, due to the short half-life of Mo-99, it is also necessary for the processing time for the irradiated target disks to be as short as possible. Experiments were performed to study and optimize the properties of Mo sintered disks for the production of disks with high density and good dissolution rates.

Tkac, Peter↗

Radiolytic Stability of the ABEC Column

A key reagent of the TechneGen generator (NorthStar) is an ABEC (aqueous biphasic extraction chromatographic) column that consists of polyethylene glycol (PEG) bonded to a polystyrene-divinylbenzene co-polymer bead. The ABEC column is highly selective for the pertechnetate ion under highly alkaline conditions, while molybdenum passes through the column. This study was focused on determining whether radiolysis of an ABEC column used multiple times in a 20-Ci (Mo-99) generator could affect the recovery of technetium due to a radiolytic degradation of PEG. Irradiations were performed using a Van de Graaff generator.

Tkac, Peter↗

Wavefront sensing, control, and pointing

A majority of future NASA astrophysics missions from orbiting interferometers to 16-m telescopes on the Moon have, as a common requirement, the need to bring light from a large entrance aperture to the focal plane in a way that preserves the spatial coherence properties of the starlight. Only by preserving the phase of the incoming wavefront, can many scientific observations be made, observations that range from measuring the red shift of quasi-stellar objects (QSO's) to detecting the IR emission of a planet in orbit around another star. New technologies for wavefront sensing, control, and pointing hold the key to advancing our observatories of the future from those already launched or currently under development. As the size of the optical system increases, either to increase the sensitivity or angular resolution of the instrument, traditional technologies for maintaining optical wavefront accuracy become prohibitively expensive or completely impractical. For space-based instruments, the low mass requirement and the large temperature excursions further challenge existing technologies. The Hubble Space Telescope (HST) is probably the last large space telescope to rely on passive means to keep its primary optics stable and the optical system aligned. One needs only look to the significant developments in wavefront sensing, control, and pointing that have occurred over the past several years to appreciate the potential of this technology for transforming the capability of future space observatories. Future developments in space-borne telescopes will be based in part on developments in ground-based systems. Telescopes with rigid primary mirrors much larger than 5 m in diameter are impractical because of gravity loading. New technologies are now being introduced, such as active optics, that address the scale problem and that allow very large telescopes to be built. One approach is a segmented design such as that being pioneered by the W.M. Keck telescope now under construction at the Mauna Kea Observatory. It consists of 36 hexagonal mirror segments, supported on a framework structure, which are positioned by actuators located between the structure and the mirrors. The figure of the telescope is initialized by making observations of a bright star using a Shack Hartmann sensor integrated with a white light interferometer. Then, using sensed data from the mirror edges to control these actuators, the figure of the mosaic of 36 segments is maintained as if it were a rigid primary mirror. Another active optics approach is the use of a thin meniscus mirror with actuators. This technique was demonstrated on the European Southern Observatory's New Technology Telescope (NTT) and is planned for use in the Very Large Telescope (consists of four 8-m apertures), which is now entering the design phase.

Pitts, Thomas↗