Search NASA⌕ Search

Engineering topics

Hastir, Anita

Publications and source records attributed to Hastir, Anita.

Gas sensing behaviour of Cr{sub 2}O{sub 3} and W{sup 6+}: Cr{sub 2}O{sub 3} nanoparticles towards acetone

This paper reports the acetone gas sensing properties of Cr{sub 2}O{sub 3} and 2% W{sup 6+} doped Cr{sub 2}O{sub 3} nanoparticles. The simple cost-effective hydrolysis assisted co-precipitation method was adopted. Synthesized samples were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) techniques. XRD revealed that synthesized nanoparticles have corundum structure. The lattice parameters have been calculated by Rietveld refinement; and strain and crystallite size have been calculated by using the Williamson-Hall plots. For acetone gas sensing properties, the nanoparticles were applied as thick film onto alumina substrate and tested at different operating temperatures. The results showed that the optimum operating temperature of both the gas sensors is 250°C. At optimum operating temperature, the response of Cr{sub 2}O{sub 3} and 2% W{sup 6+} doped Cr{sub 2}O{sub 3} gas sensor towards 100 ppm acetone was found to be 25.5 and 35.6 respectively. The investigations revealed that the addition of W{sup 6+} as a dopant enhanced the sensing response of Cr{sub 2}O{sub 3} nanoparticles appreciably.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hydrogen sensor based on Sm-doped SnO{sub 2} nanostructures

In this paper the effect of samarium doping on the structural and hydrogen gas sensing properties of SnO{sub 2} nanoparticles has been reported. X-ray Diffraction (XRD) results revealed tetragonal rutile structure of both undoped and Sm-doped SnO{sub 2} nanoparticles. It has been observed that doping with samarium led to reduction in crystallite size of SnO{sub 2} nanoparticles which was confirmed from XRD analysis. Shifting and broadening of Raman peaks in case of doped nanoparticles has been explained by well-known phonon confinement model. The optimum operable temperature of both the sensors was found to 400 °C and the sensor response towards hydrogen gas has been improved after doping with samarium which was attributed to increase in sensing sites for the gas adsorption.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photoluminescence study of ZnS and ZnS:Pb nanoparticles

Photoluminescence (PL) study of pure and 5wt. % lead doped ZnS prepared by co-precipitation method was conducted at room temperature. The prepared nanoparticles were characterized by X-ray Diffraction (XRD), UV-Visible (UV-Vis) spectrophotometer, Photoluminescence (PL) and Raman spectroscopy. XRD patterns confirm cubic structure of ZnS and PbS in doped sample. The band gap energy value increased in case of Pb doped ZnS nanoparticles. The PL spectrum of pure ZnS was de-convoluted into two peaks centered at 399nm and 441nm which were attributed to defect states of ZnS. In doped sample, a shoulder peak at 389nm and a broad peak centered at 505nm were observed. This broad green emission peak originated due to Pb activated ZnS states.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reduced graphene oxide/CeO{sub 2} nanocomposite with enhanced photocatalytic performance

In this work, reduced graphene oxide /cerium oxide (RGO/CeO{sub 2}) nanocomposite was synthesized by in situ reduction of cerium nitrate Ce(NO{sub 3}){sub 3}·6H{sub 2}O in the presence of graphene oxide by hydrazine hydrate (N{sub 2}H{sub 4}.H{sub 2}O). The intrinsic characteristics of as-prepared nanocomposite were studied using powder x-ray diffraction (XRD), Raman spectroscopy and field-emission scanning electron microscopy (FESEM). The photocatalytic degradation of methylene blue (MB) was employed as a model reaction to evaluate the photocatalytic activity of the RGO/CeO{sub 2} nanocomposite. The as-obtained RGO/CeO{sub 2} nanocomposite displays a significantly enhanced photocatalytic degradation of MB dye in comparison with bare CeO{sub 2} nanoparticles under sunlight irradiation, which can be attributed to the improved separation of electron-hole pairs and enhanced adsorption performance due to presence of RGO.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Acetone sensor based on zinc oxide hexagonal tubes

In this work hexagonal tubes of zinc oxide have been synthesized by co-precipitation method. For structural, morphological, elemental and optical analysis synthesized powders were characterized by using x-ray diffraction, field emission scanning microscope, EDX, UV-visible and FTIR techniques. For acetone sensing thick films of zinc oxide have been deposited on alumina substrate. The fabricated sensors exhibited maximum sensing response towards acetone vapour at an optimum operating temperature of 400°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗