Engineering topics
Publications and source records attributed to Hawkey, Timothy J..
SalCon Technology Corporation is developing a prototype electrostatically suspended micromechanical gyroscope in the Small Business Innovation Research (SBIR) program under Contracts 19282, and 19585 from NASA Langley Research Center. This paper presents the results of the Phase 1 feasibility study and the plans for fabrication in the upcoming Phase 2 program.
Improved linear actuator comprises air slide and linear electric motor. Unit exhibits low friction, low backlash, and more nearly even acceleration. Used in machinery in which positions, velocities, and accelerations must be carefully controlled and/or vibrations must be suppressed.
Feedback control provides soft mount and damping of vibrations. Active magnetic suspension system centers inner structure in position and orientation with respect to principal Cartesian coordinate axes of base or outer structure, stationary with respect to building or vehicle. System helps to isolate suspended mass from vibrations of building or vehicle. Designed to isolate 500-kg experimental apparatus from vibrations of spacecraft, but also used on Earth, provided that its z axis vertical and system assisted by low-stiffness vertical spring that, in steady state, holds up inner structure at nominal vertical position.
The goal of this Phase 2 Small Business Innovative Research (SBIR) project was to determine the technical feasibility of developing magnetostrictive active members for use as truss elements in space structures. Active members control elastic vibrations of truss-based space structures and integrate the functions of truss structure element, actively controlled actuator, and sensor. The active members must control structural motion to the sub-micron level and, for many proposed space applications, work at cryogenic temperatures. Under this program both room temperature and cryogenic temperature magnetostrictive active members were designed, fabricated, and tested. The results of these performance tests indicated that room temperature magnetostrictive actuators feature higher strain, stiffness, and force capability with lower amplifier requirements than similarly sized piezoelectric or electrostrictive active members, at the cost of higher mass. Two different cryogenic temperature magnetostrictive materials were tested at liquid nitrogen temperatures, both with larger strain capability than the room temperature magnetostrictive materials. The cryogenic active member development included the design and fabrication of a cryostat that allows operation of the cryogenic active member in a space structure testbed.
A magnetic bearing system for enabling translational motion includes a carriage and a shaft for movably supporting the carriage; a first magnetic bearing fixed to one of the carriage and shaft and slidably received in a first channel of the other of the carriage and shaft. The first channel is generally U shaped with two side walls and a back wall. The magnetic bearing includes a pair of spaced magnetic pole pieces, each pole piece having a pair of electromagnetic coils mounted on poles on opposite ends of the pole piece proximate the side walls, and a third electromagnetic coil mounted on a pole of the pole piece proximate the backwall; a motion sensor for sensing translational motion along two axes and rotationally about three axes of the carriage and shaft relative to each other; and a correction circuit responsive to the sensor for generating a correction signal to drive the coils to compensate for any misalignment sensed between the carriage and the shaft.