RuO 2 -NiO Nanosheets on Conductive Nickel Foam for Reliable and Regeneratable Seawater Splitting
Not provided.
Materials Science↗
Engineering topics
He, Junkai
Publications and source records attributed to He, Junkai.
Large Scale Synthesis of Manganese Oxide/Reduced Graphene Oxide Composites as Anode Materials for Long Cycle Lithium Ion Batteries
Manganese oxides have been frequently used as cathodes in primary batteries. Applications of manganese oxides in secondary batteries are limited by low electrical conductivity and rapid capacity fading because of electrode pulverization and aggregation. In this study, a solid-state synthetic strategy is presented that successfully combines nanosize (~ 50 nm) nickel doped α-MnO 2 with reduced graphene oxides as highly stable composite anodes in lithium ion batteries. The synthesis approach is easy to scale up and suitable for industrial applications. Here, the rationally designed Ni-α-MnO 2 /RGO was tested in galvanostatic half coin cells for Li + charge-discharge studies. The results show that this composite maintains a high capacity of 615 mAh g -1 even after 200 cycles at a high current rate of 1 C (830 mA g -1 ), and with a high Coulombic efficiency near 99%. The anodes exhibit excellent rate capability in a wide range of rate testing from 0.2 to 10 C, without showing capacity decay. This superior anode performance is ascribed to the reduced size of α-MnO 2 domains that are well dispersed in an RGO matrix, which affords good ionic/elec. cond., low charge transfer resistance and mitigates issues of vol. expansion of the anodic active materials. This study opens up an avenue for developing the manufacturing of high-performance electrodes for real applications, such as batteries in electrical vehicles.
25 ENERGY STORAGE↗
Identification of key oxidative intermediates and the function of chromium dopants in PKU-8: catalytic dehydrogenation of sec-alcohols with tert-butylhydroperoxide
Catalytic oxidation using green oxidants has played an important role in modern chemical engineering, however the in-situ generated active groups and the related catalytic mechanism need to be further understood. Combined with several measurements, such as isotopic tracers, molecular probes and cycle voltammetry, chromium ions were observed to undergo a Cr 3+ –Cr 2+ –Cr 3+ redox cycle. Simultaneously, t-BuOO* groups are generated in a large quantity and seem to function as the most critical active species to enhance the dehydrogenation of sec-alcohols when using TBHP as oxidant. DFT calculations give an energetically favorable pathway for TBHP activation, agreeing well with the obtained catalytic results. Here, a reaction scheme was finally proposed to interpret the probable mechanistic process.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Synergistic catalysis by Mn promoted ceria for molecular oxygen assisted epoxidation
Mesoporous manganese doped cerium oxide catalysts were prepared by an inverse micelle method with different manganese loadings. These materials exhibited superior activity for epoxidation of alkenes with molecular oxygen. Highest active 10MnCe material showed an activity of 80 % conversion and >99 % selectivity for cyclooctene epoxidation. The fluorite crystal structure which facilitates the high oxygen mobility, low temperature reducibility, homogeneous distribution of manganese on ceria, nanoparticle nature, higher number of oxygen vacancies, low valent states of manganese and cerium, and the ability to generate reactive oxygen species of the manganese doped cerium oxide could be correlated to the high catalytic activity. The reaction followed first order kinetics with a rate constant of 0.31 h –1 at 100 °C, and the activation energy turned out to be 10.5 kJ/mol. In conclusion, the mechanistic study revealed that the reaction proceeds via a unique mechanism which involves in situ generated superoxide and singlet oxygen species..
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution
Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO 2 , Ce 0.92 Zr 0.08 O 2 , and Ce0.84Zr0.16O2 composed of 5–6 nm crystallites display Tm-CO 2 (the temperature at maximum CO 2 yield) at 383, 355, and 375°C under 10 vol.% O 2 /N 2 , respectively. Additionally, the size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O2- and O-) for soot oxidation. Thus, the activities of Ce 0.92 Zr 0.08 O 2 and Ce 0.84 Zr 0.16 O 2 in soot combustion are better than that of CeO2. Although oxygen vacancies promote the migration of lattice O 2- , the enriched surface Zr also inhibits the mobility of lattice O 2- . Therefore, the Tm-CO 2 of Ce 0.84 Zr 0.16 O 2 is higher than that of Ce 0.92 Zr 0.08 O 2 . Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.
54 ENVIRONMENTAL SCIENCES↗
Multifunctional transition metal doped titanium dioxide reduced graphene oxide composites as highly efficient adsorbents and photocatalysts
A series of novel, mesoporous transition metal doped titanium dioxide-reduced graphene oxide composites are synthesized where the dopants were Mn, Co, Ni, Mo, and W. An in-situ synthesis method was used which involves a green, economic, hydrothermal process which can be scaled up easily. The composites show high surface areas (165–245 m 2 /g) and monomodal pore size distributions with average pore diameters in the range of 3–5 nm. The homogeneous distributions of the dopants are seen in SEM-EDX mapping data. The indirect band gaps of the composite materials are in the range of 2.20–2.48 eV. The composites show excellent dye adsorption activities where 100% adsorption of Rhodamine B occurs within 5 min when Mo–TiO 2 /rGO composite is used. Furthermore, the adsorbed dye can either be desorbed or photocatalytically degraded and the composite is reusable up to 10 cycles without losing significant activity. Mo–TiO 2 /rGO composite showed excellent adsorption of both cationic and anionic dyes at neutral pH.
36 MATERIALS SCIENCE↗
Enhanced visible-light-assisted peroxymonosulfate activation on cobalt-doped mesoporous iron oxide for orange II degradation
Sulfate radical-based advanced oxidation processes (SR-AOP) attracted a lot of attention due to their capability and adaptability in wastewater treatment. Although heterogeneous cobalt-based catalysts have been extensively studied and have emerged superior for peroxymonosulfate (PMS) activation, leaching of cobalt is still a major concern. Herein, we report a photo-assisted PMS activation approach using cobalt doped mesoporous iron oxide with exceptional activity and stability up to 7 cycles with very low cobalt leaching (0.5 ppm). The highest activity was obtained by 1 mol % cobalt doped mesoporous iron oxide. Orange II dye was completely degraded by the reactive oxygen species (ROS) generated under visible light irradiation within 1 min. ROS were evaluated using two distinct techniques (Fluorescence probes and Electron Paramagnetic Resonance (EPR). ROS quenching experiments were also used to highlight the dominant pathway. This study correlates the structural and electronic changes induced with cobalt doping to the exceptional activity.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Self-grown NiCuO x hybrids on a porous NiCuC substrate as an HER cathode in alkaline solution
Electrocatalysts converted directly from the substrates hold the key to achieve high catalytic activity and durability due to their high bonding strength, intimate electronic contact, and tunable phase composition. Herein, an electrically conductive porous NiCuC substrate was adopted to develop a multi-porous NiCuO x /NiCuC hydrogen evolution reaction (HER) catalyst using a one-step oxidation method in this research. The NiCuO x hybrids were characterized as three typical layers: an outer layer with NiCuO 2 solid solution phase, a partially oxidized intermediate layer, and an inner layer with limited stable oxygen content. Here, the NiCuO x /NiCuC possesses abundant Ni(II)–Cu(II) sites to accelerate the Volmer step via the electrostatic effect with OH – , numerous metallic NiCu sites to facilitate the H adsorption, and highly accessible channels to promote the Heyrovsky step during HER catalysis. As a result, high electrocatalytic performance was obtained with an overpotential of 116 mV at a current density of 10 mA cm –2 in 1.0 M potassium hydroxide, and a stable catalytic performance during the HER process for more than 24 h.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High surface area mesoporous tungsten oxide for fast, green oxidation of organosulfur compounds in crude oil
Mesoporous, multi-valent tungsten oxide with high surface area (209 m 2 /g) is synthesized via a novel metal dissolution coupled with reverse micelle formation approach. Mesoporous tungsten oxide with highest surface area reported is obtained by this method. The material is used as an excellent heterogeneous catalyst for the oxidation of organosulfur compounds present in crude oil. The complete oxidation of dibenzothiophene was observed with excellent yield (>99%) within 15 min at room temperature (20 °C). The catalyst is reusable up to 5 reaction cycles without losing significant activity. A green oxidant, H 2 O 2 is used and the reaction mechanism involves the activation of peroxo species by W 6+ . The oxidation activity decreases in the order of DBT > 4,6-DMDBT > 1-BT due to the changes in the electronic environment of sulfur and steric effects.
36 MATERIALS SCIENCE↗
Generalized synthesis of high surface area mesoporous metal titanates as efficient heterogeneous catalysts
A novel metal dissolution coupled with reverse micelle formation approach is used as a generalized synthesis method for a series of high surface area metal titanates where the metals used are Bi, Mg, V, Mn, Fe, Co, Ni, Cu, Zn, Mo, W, and Ce. This study reports the highest surface areas published so far. The homogeneous distributions of the metals and titanium are observed in SEM-EDX and TEM mapping. The synthesized materials were comprehensively characterized using PXRD, Raman, nitrogen adsorption isotherms, SEM; EDX, TEM, TEM mapping, TGA, and XPS. The green catalytic oxidation of aniline to nitrosobenzene occurs within 30 min at room temperature when mesoporous W/Ti binary metal oxide is used as the catalyst. The radical mediated catalytic reaction gives excellent yields and the catalyst is reusable up to 4 reaction cycles without losing significant activity.
36 MATERIALS SCIENCE↗