Search NASA⌕ Search

Engineering topics

He, Qian

Publications and source records attributed to He, Qian.

At least 37 records · Page 2

Bulk nanofabrication with single atomic plane precision via atomic-level sculpting of crystalline oxides

A method for sculpting crystalline oxide structures for bulk nanofabrication is provided. The method includes the controlled electron beam induced irradiation of amorphous and liquid phase precursor solutions using a scanning transmission electron microscope. The atomically focused electron beam includes operating parameters (e.g., location, dwell time, raster speed) that are selected to provide a higher electron dose in patterned areas and a lower electron dose in non-patterned areas. Concurrently with the epitaxial growth of crystalline features, the present method includes scanning the substrate to provide information on the size of the crystalline features with atomic resolution. This approach provides for atomic level sculpting of crystalline oxide materials from a metastable amorphous precursor and the liquid phase patterning of nanocrystals.

36 MATERIALS SCIENCE↗

Methyl Ketones from Municipal Solid Waste Blends by One‐Pot Ionic‐Liquid Pretreatment, Saccharification, and Fermentation

Abstract The conversion of municipal solid waste (MSW) and lignocellulosic biomass blends to methyl ketones (MKs) was investigated by using bioderived ionic liquid (bionic liquid)‐based hydrolysates followed by fermentation with an engineered Escherichia coli strain. The hydrolysates were produced by a one‐pot process using six types of MSW–biomass blends, choline‐based bionic liquids, and commercial enzymes. Based on the sugar yields, one blend (corn stover/MSW=95:5, w / w ) and two bionic liquids {cholinium lysinate ([Ch][Lys]) and cholinium aspartate ([Ch] 2 [Asp])} were selected for scale‐up studies. Maximum yields of 82.3 % glucose and 54.4 % xylose were obtained from the selected blend in the scale‐up studies (6 L), which was comparable with 83.6 % glucose and 52.8 % xylose obtained at a smaller scale (0.2 L). Comparable or higher yields of medium‐chain (C 11 –C 17 ) MKs were achieved by using the MSW–biomass blend‐derived hydrolysates, relative to the sugar controls (glucose and xylose) with similar sugar feeding concentrations. Up to 1145 mg L −1 of MKs was produced by using MSW–biomass‐derived hydrolysates, and the MK titer decreased to 300 mg L −1 when the bionic‐liquid concentration in the hydrolysate increased from 1 to 2 %, indicative of bionic‐liquid inhibition. Technoeconomic analysis was conducted to investigate the economic potential of using the selected MSW–biomass blend as a feedstock to produce MKs.

Yan, Jipeng↗

Modeling of underexpanded hydrogen jets through square and rectangular slot nozzles

The development and revision of safety codes and standards for hydrogen infrastructure requires a solid scientific basis, including studies of unignited releases from high pressure systems for various scenarios. Most hydrogen releases are modeled as axisymmetric jets, but real leaks are more likely to be non-axisymmetric jets issuing from high aspect ratio cracks or slots. In the present study, underexpanded hydrogen jets from square and rectangular nozzles with aspect ratios of 1 to 16 were numerically modeled for stagnation pressures up to 20 MPa. The near and far flow fields were modeled separately using two sequential computational domains to accurately and efficiently capture the flow characteristics. The numerical models were first validated with experimental data from a previous experimental study and literature data. The mass fraction and velocity distributions show that the centerline decay rates increase as the nozzle aspect ratio increases, but this increase is dependent on the pressure. This means that the canonical decay law of round turbulent jets and plumes no longer applies to the slot nozzle jets for high pressures. The radial profiles collapse onto a Gaussian curve in the minor axis plane, but neither collapse, nor are they Gaussian in the major axis plane with peaks away from the jet centerline. Different shock patterns were identified along the major and minor axes and the axis switching phenomenon seen in the literature was also reproduced. The axis switching resulted in significantly wider flattened concentration distributions compared with the axisymmetric jet which may require consideration during safety analyses for non-circular nozzles. A scaling factor taking both the nozzle shape and pressure effects into account SAND2018-12056J This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government. was then devleoped to better scale the centerline decay rates for jets from both the square and rectangular nozzles. The present study demonstrates that the nozzle shape effects on the jet spreading should not be overlooked and proper scaling factors are required to collapse the data and calculate decay rates.

08 HYDROGEN↗

Correlation between Geometrically Induced Oxygen Octahedral Tilts and Multiferroic Behaviors in BiFeO 3 Films

The equilibrium position of atoms in a unit cell is directly connected to crystal functionalities, e.g., ferroelectricity, ferromagnetism, and piezoelectricity. The artificial tuning of the energy landscape can involve repositioning atoms as well as manipulating the functionalities of perovskites (ABO 3 ), which are good model systems to test this legacy. Mechanical energy from external sources accommodating various clamping substrates is utilized to perturb the energy state of perovskite materials fabricated on the substrates and consequently change their functionalities; however, this approach yields undesired complex behaviors of perovskite crystals, such as lattice distortion, displacement of B atoms, and/or tilting of oxygen octahedra. Owing to complimentary collaborations between experimental and theoretical studies, the effects of both lattice distortion and displacement of B atoms are well understood so far, which leaves us a simple question: Can we exclusively control the positions of oxygen atoms in perovskites for functionality manipulation? Here the artificial manipulation of oxygen octahedral tilt angles within multiferroic BiFeO 3 thin films using strong oxygen octahedral coupling with bottom SrRuO 3 layers is reported, which opens up new possibilities of oxygen octahedral engineering.

36 MATERIALS SCIENCE↗

Pilot-Scale Studies of Lignin-Derived Ionic Liquids for Biomass Pretreatment

The polymers found in plant cell walls represent the largest reserves of renewable carbon on Earth - it has been estimated that the United States has approximately 1.3 billion tons of plant biomass available per year. Ionic liquids (ILs) are salts with melting points less than 100oC, typically containing organic cations, that possess a wide range of extraordinary properties as compared to traditional organic solvents. The unusual catalytic and solvation properties of ionic liquids have attracted the biofuel and biomass communities because IL-pretreatment provides higher fermentable sugar yields than those obtained by acid- or alkali-pretreatment under similar severities. This research used lignin, a major by-product of the biofuel and pulping industries, as raw material for IL synthesis. The goal is to lower the cost of IL production, and enable a more "closed-loop" biorefinery. The lignin is oxidatively depolymerized, purified, and used to prepare a new class of renewable ILs. Biomass pretreatment was the target application for the lignin-derived ILs, while we continue to investigate additional applications within the growing IL market - process chemistry, biotechnology and materials recycling. When comparing our corn stover pretreatment data to recently published reports, we have shown comparable glucose and xylose yields by using neat and 10% aqueous solutions of lignin-derived ILs.

09 BIOMASS FUELS↗

Production of chemical intermediate triacetic acid lactone (TAL) via bacterial fermentation of deconstructed lignin (CRADA Final Report)

The objective of this study was to test the feasibility of using Acinetobacter baylyi as a host strain for production of Triacetic acid lactone (TAL) molecules. A. baylyi was never used as a host strain for the production of an industrial chemical. Moreover, we wanted to test if A. baylyi can consume lignin-based monomers and then convert them to TAL as well. Process optimization in well plate, shake flask and 2L bioreactors along with TAL toxicity studies were planned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polycomb-like proteins link the PRC2 complex to CpG islands

The Polycomb repressive complex 2 (PRC2) mainly mediates transcriptional repression1,2 and has essential roles in various biological processes including the maintenance of cell identity and proper differentiation. Polycomb-like (PCL) proteins, such as PHF1, MTF2 and PHF19, are PRC2-associated factors that form sub-complexes with PRC2 core components3, and have been proposed to modulate the enzymatic activity of PRC2 or the recruitment of PRC2 to specific genomic loci4,5,6,7,8,9,10,11,12,13. Mammalian PRC2-binding sites are enriched in CG content, which correlates with CpG islands that display a low level of DNA methylation14. However, the mechanism of PRC2 recruitment to CpG islands is not fully understood. Here we solve the crystal structures of the N-terminal domains of PHF1 and MTF2 with bound CpG-containing DNAs in the presence of H3K36me3-containing histone peptides. We show that the extended homologous regions of both proteins fold into a winged-helix structure, which specifically binds to the unmethylated CpG motif but in a completely different manner from the canonical winged-helix DNA recognition motif. We also show that the PCL extended homologous domains are required for efficient recruitment of PRC2 to CpG island-containing promoters in mouse embryonic stem cells. Our research provides the first, to our knowledge, direct evidence to demonstrate that PCL proteins are crucial for PRC2 recruitment to CpG islands, and further clarifies the roles of these proteins in transcriptional regulation in vivo.

58 GEOSCIENCES↗

Manipulating multiple order parameters via oxygen vacancies: The case of E u 0.5 B a 0.5 Ti O 3 - δ

Controlling functionalities, such as magnetism or ferroelectricity, by means of oxygen vacancies (${V}_{\mathrm{O}}$) is a key issue for the future development of transition-metal oxides. Progress in this field is currently addressed through ${V}_{\mathrm{O}}$ variations and their impact on mainly one order parameter. In this paper, we reveal a mechanism for tuning both magnetism and ferroelectricity simultaneously by using ${V}_{\mathrm{O}}$. Combining experimental and density-functional theory studies of $\mathrm{E}{\mathrm{u}}_{0.5}\mathrm{B}{\mathrm{a}}_{0.5}\mathrm{Ti}{\mathrm{O}}_{3{-}{\delta}}$, we demonstrate that oxygen vacancies create $\mathrm{T}{\mathrm{i}}^{3+}3{d}^{1}$ defect states, mediating the ferromagnetic coupling between the localized Eu $4{f}^{7}$ spins, and increase an off-center displacement of Ti ions, enhancing the ferroelectric Curie temperature. Finally, the dual function of Ti sites also promises a magnetoelectric coupling in the $\mathrm{E}{\mathrm{u}}_{0.5}\mathrm{B}{\mathrm{a}}_{0.5}\mathrm{Ti}{\mathrm{O}}_{3{-}{\delta}}$.

36 MATERIALS SCIENCE↗

Conversion of cellulose rich municipal solid waste blends using ionic liquids: feedstock convertibility and process scale-up

For this study, sixteen cellulose rich municipal solid waste (MSW) blends were developed and screened using an acid-assisted ionic liquid (IL) deconstruction process. Corn stover and switchgrass were chosen to represent herbaceous feedstocks; non-recyclable paper (NRP) and grass clippings (GC) collected from households were chosen as MSW candidates given their abundance in municipal waste streams. The most promising MSW blend: corn stover/non-recyclable paper (CS/NRP) at 80/20 ratio was identified in milliliter-scale screening based on the sugar yield, feedstock cost, and availability. A successful scale-up (600-fold) of the IL-acidolysis process on the identified CS/NRP blend has been achieved. The sugar and lignin streams were recovered and characterized. Mass and material energy flows of the optimized process were presented. Feedstock cost for MSW blends was also discussed. Results suggest the promising potential of using MSW as a feedstock blending agent for biorefineries while maintaining sufficient performance and low feedstock cost. The bench scale (6 L) study is an essential step in demonstrating the scalability of this IL technology.

09 BIOMASS FUELS↗

Cation–Eutectic Transition via Sublattice Melting in CuInP 2 S 6 /In 4/3 P 2 S 6 van der Waals Layered Crystals

Single crystals of the van der Waals layered ferrielectric material CuInP 2 S 6 spontaneously phase separate when synthesized with Cu deficiency. In this paper, we identify a route to form and tune intralayer heterostructures between the corresponding ferrielectric (CuInP 2 S 6 ) and paraelectric (In 4/3 P 2 S 6 ) phases through control of chemical phase separation. We conclusively demonstrate that Cu-deficient Cu 1–x In 1+x/3 P 2 S 6 forms a single phase at high temperature. We also identify the mechanism by which the phase separation proceeds upon cooling. Above 500 K both Cu + and In 3+ become mobile, while P 2 S 6 4– anions maintain their structure. We therefore propose that this transition can be understood as eutectic melting on the cation sublattice. Such a model suggests that the transition temperature for the melting process is relatively low because it requires only a partial reorganization of the crystal lattice. As a result, varying the cooling rate through the phase transition controls the lateral extent of chemical domains over several decades in size. At the fastest cooling rate, the dimensional confinement of the ferrielectric CuInP 2 S 6 phase to nanoscale dimensions suppresses ferrielectric ordering due to the intrinsic ferroelectric size effect. Finally, intralayer heterostructures can be formed, destroyed, and re-formed by thermal cycling, thus enabling the possibility of finely tuned ferroic structures that can potentially be optimized for specific device architectures.

2D ferrielectric↗

In Situ Observation of Oxygen Vacancy Dynamics and Ordering in the Epitaxial LaCoO 3 System

Vacancy dynamics and ordering underpin the electrochemical functionality of complex oxides and strongly couple to their physical properties. In the field of the epitaxial thin films, where connection between chemistry and film properties can be most clearly revealed, the effects related to oxygen vacancies are attracting increasing attention. Here, we report a direct, real-time, atomic level observation of the formation of oxygen vacancies in the epitaxial LaCoO 3 thin films and heterostructures under the influence of the electron beam utilizing scanning transmission electron microscopy (STEM). In the case of LaCoO 3 /SrTiO 3 superlattice, the formation of the oxygen vacancies is shown to produce quantifiable changes in the interatomic distances, as well as qualitative changes in the symmetry of the Co sites manifested as off-center displacements. The onset of these changes was observed in both the [100]pc and [110]pc orientations in real time. Additionally, annular bright field images directly show the formation of oxygen vacancy channels along [110]pc direction. In the case of 15 u.c. LaCoO 3 thin film, we observe the sequence of events during beam-induced formation of oxygen vacancy ordered phases and find them consistent with similar processes in the bulk. Moreover, we record the dynamics of the nucleation, growth, and defect interaction at the atomic scale as these transformations happen. These results demonstrate that we can track dynamic oxygen vacancy behavior with STEM, generating atomic-level quantitative information on phase transformation and oxygen diffusion.

36 MATERIALS SCIENCE↗

High Performance Polymers from Biomass

The objective of this study was to demonstrate feasibility and scale-up of cellulosic feedstocks for the production of a commercial C6 lactone. Visolis, Inc. has developed a fermentation platform for production of the lactone at high titers and yields. The lactone is used in high-end cosmetics industry and also serves as a valuable intermediate for production of biopolymers and biofuels. Strains employed by Visolis are capable of metabolizing both glucose and xylose, enabling full utilization of cellulosic hydrolysates as feedstock. Visolis and ABPDU conducted a 2L proof-of-concept fermentation campaign followed by a 50L scale-up campaign.

09 BIOMASS FUELS↗

Production of C5 Hydrocarbons from Water Biomass

The objective of this study was to demonstrate feasibility and scale-up of cellulosic feedstocks for the production of a commercial C 6 lactone. Visolis, Inc. has developed a fermentation platform for production of the lactone at high titers and yields. The lactone is used in high-end cosmetics industry and also serves as a valuable intermediate for production of biopolymers and biofuels. Strains employed by Visolis are capable of metabolizing both glucose and xylose, enabling full utilization of cellulosic hydrolysates as feedstock. Visolis and ABPDU conducted a 2L proof-of-concept fermentation campaign followed by a 50L scale-up campaign.

09 BIOMASS FUELS↗

Novel Biocatalytic Platform for Ethanol Production from Lignocellulosic Feedstock

The goals of the CRADA were achieved by illustrating the scalability of immobilized yeast technology, demonstrating lignocellulosic feedstock consumption by the immobilized cells, and confirming Microvi’s proprietary polymer matrix ethanol toxicity tolerance. We conducted fermentations at 2L and 300L scales. For carbon source, we performed pretreatment and saccharification at 100L scale to produce lignocellulosic sugars with glucose and xylose.

09 BIOMASS FUELS↗