Search NASA⌕ Search

Engineering topics

He, Yang

Publications and source records attributed to He, Yang.

At least 55 records · Page 3

Real-time Atomic-scale Visualization of Reversible Copper Surface Activation during the CO Oxidation Reaction

Dynamic structural and chemical information of catalyst surface during a catalytic reaction is critical for deciphering the mechanisms governing the properties of catalysts. Transition-metal based catalysts have emerged as an important alternative to noble metal catalysts, but their catalytic mechanism remains largely elusive, complicated by dynamic structure and valence evolution. Herein, by using in situ aberration-corrected environmental transmission electron microscopy, we capture, for the first time at atomic level, the dynamic evolution of Cu surface during CO oxidation reaction. We discovered that, under reaction condition, the Cu surface is activated, typically involving 2-3 atomic layers with the formation of a reversible meta-stable phase that only exists during catalytic reactions. Further, we reveal the distinctive role of CO and O2 in the surface activation, featuring CO exposure to lead to surface roughening and consequently formation of low-coordinated Cu atoms, while O2 exposure to induce quasi-crystalline CuOx phase. Corrugated by DFT calculations, we rationalize crystalline CuOx reversibly transforms into the amorphous phase, acting as an active species to facilitate the interaction of gas reactants and catalyzing CO oxidation.

Luo, Langli↗

Atomic to Nanoscale Origin of Vinylene Carbonate Enhanced Cycling Stability of Lithium Metal Anode Revealed by Cryo-Transmission Electron Microscopy

Batteries using lithium (Li) metal as anode are considered promising energy storage systems because of their high specific energy densities. The crucial bottlenecks for Li-metal anode are Li dendrites growth and side reactions with electrolyte inducing low Coulombic efficiency (CE) and short cycle life. Vinylene carbonate (VC), as an effective electrolyte additive in Li-ion batteries, has been noticed to significantly enhance the CE, while the origin of such an additive remains unclear. Here we use cryo-TEM imaging combing with EDS elemental and EELS electronic structure analyses to reveal the role of VC additive. We discovered that the electrochemically deposited Li metal (EDLi) in VC-containing electrolyte is slightly oxidized with the SEI being a nanoscale-mosaic like structure comprised of organic species, Li 2 O and Li 2 CO 3 ; while the EDLi formed in VC-free electrolyte is featured by a combination of fully oxidized Li with Li 2 O SEI layer and pure Li metal with multilayer nano-structured SEI. These results highlight the possible tuning of crucial structural and chemical features of EDLi and SEI through additives and consequently direct correlation with electrochemical performance, providing valuable guidelines to rational selection, design and synthesis of additives for new battery chemistries.

solid electrolyte interphase (SEI)↗

Imaging emergent heavy Dirac fermions of a topological Kondo insulator

The interplay between strong electron interactions and band topology is a new frontier in the search for exotic quantum phases. The Kondo insulator SmB 6 has emerged as a promising platform because its correlation-driven bulk gap is predicted to host topological surface modes entangled with f electrons, spawning heavy Dirac fermions. Unlike the conventional surface states of non-interacting topological insulators, heavy Dirac fermions are expected to harbour spontaneously generated quantum anomalous Hall states, non-Abelian quantum statistics, fractionalization and topological order. Yet, the small energy scales required to probe heavy Dirac fermions have complicated their experimental realization. Here we use high-energy-resolution spectroscopic imaging in real and momentum space on SmB 6 . On cooling below 35 K, we observe the opening of an insulating gap that expands to 14 meV at 2 K. Within the gap, we image the formation of linearly dispersing surface states with effective masses reaching 410 ± 20 m e (where me is the mass of the electron). Our findings demonstrate the presence of correlation-driven heavy surface states in SmB 6 , in agreement with theoretical predictions. Their high effective mass translates to a large density of states near zero energy, which magnifies their susceptibility to the anticipated novel orders and their potential utility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Origin of lithium whisker formation and growth under stress

Lithium metal has the lowest standard electrochemical redox potential and very high theoretical specific capacity, making it the ultimate anode material for rechargeable batteries. However, its application in batteries has been impeded by the formation of Li whiskers, which consume the electrolyte, deplete active Li and may lead to short-circuit of the battery. Tackling these issues successfully is dependent on acquiring sufficient understanding of the formation mechanisms and growth of Li whiskers under the mechanical constraints of a separator. Here, by coupling an atomic force microscopy cantilever into a solid open-cell set-up in environmental transmission electron microscopy, we directly capture the nucleation and growth behaviour of Li whiskers under elastic constraint. First, we show that Li deposition is initiated by a sluggish nucleation of a single crystalline Li particle, with no preferential growth directions. Remarkably, we find that retarded surface transport of Li plays a decisive role in the subsequent deposition morphology. We then explore the validity of these findings in practical cells using a series of carbonate-poisoned ether-based electrolytes. Finally, we show that Li whiskers can yield, buckle, kink or stop growing under certain elastic constraints.

25 ENERGY STORAGE↗

Mechanism by which Tungsten Oxide Promotes the Activity of Supported V 2 O 5 /TiO 2 Catalysts for NO X Abatement: Structural Effects Revealed by 51 V MAS NMR Spectroscopy

Abstract The selective catalytic reduction (SCR) of NO x with NH 3 to N 2 with supported V 2 O 5 (‐WO 3 )/TiO 2 catalysts is an industrial technology used to mitigate toxic emissions. Long‐standing uncertainties in the molecular structures of surface vanadia are clarified, whereby progressive addition of vanadia to TiO 2 forms oligomeric vanadia structures and reveals a proportional relationship of SCR reaction rate to [surface VO x concentration] 2 , implying a 2‐site mechanism. Unreactive surface tungsta (WO 3 ) also promote the formation of oligomeric vanadia (V 2 O 5 ) sites, showing that promoter incorporation enhances the SCR reaction by a structural effect generating adjacent surface sites and not from electronic effects as previously proposed. The findings outline a method to assess structural effects of promoter incorporation on catalysts and reveal both the dual‐site requirement for the SCR reaction and the important structural promotional effect that tungsten oxide offers for the SCR reaction by V 2 O 5 /TiO 2 catalysts.

Jaegers, Nicholas R.↗

High-performance silicon anodes enabled by nonflammable localized high-concentration electrolytes

Silicon (Si) anode is regarded as one of the most promising alternatives to graphite for high energy density lithium ion batteries (LIBs), but their practical applications have been hindered by high volume change, limited cycle life and safety concerns. In this work we developed nonflammable localized high concentration electrolytes (LHCEs) for Si-based anodes. The LHCEs enabled the Si anodes with significantly enhanced electrochemical performances comparing to the conventional carbonate electrolytes with high content of fluoroethylene carbonate (FEC). The LHCE with only 1.2 wt% FEC can further improve the long-term cycling stability of Si-based anodes. When coupled with a LiNi0.3Mn0.3Co0.3O2 cathode, the full cells using this nonflammable LHCE could maintain >90% capacity after 600 cycles at C/2 rate, demonstrate excellent rate capability and cycling stability at elevated temperatures and high loadings. This work casts new insights in electrolyte development from the perspective of in-situ Si/electrolyte interphase protection for high energy density LIBs with Si anodes.

Silicon anode, electrolyte, nonflammable, localize↗

High temperature shockwave stabilized single atoms

The stability of single-atom catalysts is critical for their practical applications. Although a high temperature can promote the bond formation between metal atoms and the substrate with an enhanced stability, it often causes atom agglomeration and is incompatible with many temperature-sensitive substrates. Here, we report using controllable high-temperature shockwaves to synthesize and stabilize single atoms at very high temperatures (1,500-2,000 K), achieved by a periodic on-off heating that features a short on state (55 ms) and a ten-times longer off state. The high temperature provides the activation energy for atom dispersion by forming thermodynamically favourable metal-defect bonds and the off-state critically ensures the overall stability, especially for the substrate. The resultant high-temperature single atoms exhibit a superior thermal stability as durable catalysts. In conclusion, the reported shockwave method is facile, ultrafast and universal (for example, Pt, Ru and Co single atoms, and carbon, C 3 N 4 and TiO 2 substrates), which opens a general route for single-atom manufacturing that is conventionally challenging.

42 ENGINEERING↗

Mechanism by which Tungsten Oxide Promotes the Activity of Supported V 2 O 5 /TiO 2 Catalysts for NO X Abatement: Structural Effects Revealed by 51 V MAS NMR Spectroscopy

Growing concern for environmental pollutants coupled with an expansion of energy demand has promoted significant interest in technologies to abate contaminating species. Nitrogen oxides are particularly alarming due to their numerous detrimental impacts to the environment and public health, where selective catalytic reduction to inert N 2 is an industrially-relevant mitigation technology. Herein, we provide unique, molecular-level insight on the structure and reactivity of V 2 O 5 (-WO 3 )/TiO 2 catalysts employed at stationary facilities for NO x removal. Detailed catalytic testing, spectroscopy (nuclear magnetic resonance, Raman, and electron paramagnetic resonance), and electronic structure-based predictions of 51 V chemical shifts help clarify the promotional role of tungsten oxide and identify an active site requirement for SCR of NO x . We show that progressive addition of vanadia to the catalyst surface increases the catalytic SCR performance and promotes the formation of larger vanadium domains, demonstrating the proportional relationship of SCR reaction rate to [VO x loading]2 for supported V 2 O 5 /TiO 2 catalysts with increasing surface vanadia coverage. Tungsten oxide incorporation enhances catalyst reactivity which is shown to stem not from electronic effects, but from changes to the vanadium structure as observed spectroscopically. The progressive addition of tungsten oxide to the catalyst surface also increases the catalytic performance and promotes the formation of larger vanadium domains, which are beneficial for catalytic turnover in a two-site model. Further, unique monomeric species are confidently ascribed to distorted tetrahedral and square pyramidal structures, resolving a long-standing uncertainty in literature assignments for the signals. These findings provide strong support for both the dual-site requirement for the SCR reaction and the important structural promotional effect that tungsten offers for mitigation of these harmful pollutants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constructing Robust Electrode/Electrolyte Interphases to Enable Wide Temperature Applications of Lithium-Ion Batteries

The electrolyte generally dictates the working temperature range of lithium ion batteries (LIBs), thus developing new class of electrolytes (primarily functional additives) in LIBs for wide temperature applications will be quite essential for further development of LIBs for electric vehicle market. In this study, we develop new functional electrolytes containing multiple additives to enable the LIBs to perform well in a wide temperature range from -40°C to 60°C. Importantly, those cells based on the above optimized electrolytes have been proven to behave significantly enhanced discharging performance at -40°C, the long-term cycling stability at 25°C (more than 85% of capacity retention after 1000 cycles at 1C/1C rates in 1 Ah pouch cells), as well as the obviously improved cycling stability at 60°C. These remarkable cell performances originate from the highly conductive, uniform and compact passivating films formed on both anode and cathode surfaces by the synergistic effects of the multiple additives. Our finding on the synergistic benefits originating from certain additive combination in the optimized electrolytes would favorably widen the working temperature range of future high-performance LIBs.

Lithium ion battery, electrolyte, additive, electr↗

Interconnected Vertically Stacked 2D-MoS2 for Ultrastable Cycling of Rechargeable Li-Ion Battery

2D layer structured material is often high-capacity ionic storage material with fast ionic transport within the layers. This appears to be the case for non-conversion layer structure, such as graphite. However, this is not the case for conversion-type layered structure such as transition metal sulfide, in which localized congestion of ionic species adjacent to the surface will induce localized conversion, leading to the blocking of the fast diffusion channels and fast capacity fading, which therefore constitutes one of the critical barriers for the application of transition metal sulfide layered structure. In this work, we report the tackling of this critical barrier through nanoscale engineering. We discover that vertically-stacked 2D-MoS2 can dramatically enhance the cycling stability. Atomic level in-situ TEM observation reveals that the MoS2 nanocakes assembled with tangling (100)-terminated nanosheets offer abundant open channels for Li+ insertion through the (100) surface, featuring an enhanced cyclability performance for over 200 cycle with a capacity retention of 90%. In contrast, (001)-terminated MoS2 nanoflowers only retains 10% of original capacity after 50 cycles. The present work demonstrates a general principle and opens a new route of crystallographic design to enhance electrochemical performance for assembling 2D materials for energy storage.

Sun, Congli↗

Superionic Conduction and Interfacial Properties of the Low Temperature Phase Li7P2S8Br0.5I0.5

Sulfide-based solid electrolytes are pursued for their application in bulk-type all-solid-state lithium batteries. Although the usefulness of Li10GeP2S12-type materials have been demonstrated in all-solid-state cathodes, a suitable material with both high ionic conductivity and good interfacial properties with common anode materials is still lacking. In this work, we explore the phase and transport properties of mechanically-milled Li7P2S8Br0.5I0.5, with emphasis on the favorable kinetics at Li metal anode. The low temperature crystalline phase Li7P2S8Br0.5I0.5 (LT-LPSBI) has exceptionally high ionic conductivity of 4.7 mS/cm at room temperature. Moreover, the LT-LPSBI supports long-term Li cycling at 0.5 mA cm-2 with low and stable interfacial resistance (5 O cm2). Transport phenomenon of Li/LT-LPSBI interface and cycling behavior of Li symmetric cells are studied and discussed in detail.

Wang, Yuxing↗

Resistive switching effect of YBa2Cu3O7–x/Nb:SrTiO3 heterostructure

Highlights: • Resistive switching effects of Nb:SrTiO{sub 3} with different electrodes were examined. • Effects of charge trap and interface barrier on the resistive switching effects were studied. • Current transmission properties of Nb:SrTiO{sub 3} under the low- and high- resistance states were analyzed. - Abstract: In this study, YBa{sub 2}Cu{sub 3}O{sub 7―x}/Nb:SrTiO{sub 3} (YBCO/Nb:STO) planar heterostructure was prepared on Nb:SrTiO{sub 3} (Nb:STO) substrate by sol-gel method. The I–V curves revealed that the structure exhibited excellent resistive switching (RS) effect. Current transmission characteristics of the heterostructure prepared using different electrodes and Nb:STO were analyzed. Results indicated that the RS effect was caused by the capture and escape of the electrons from the charge trap at the interface between electrode and Nb:STO. Schottky barrier was a prerequisite for the RS effect. Further investigation of the current transport properties of the YBCO/Nb:STO heterostructure at low temperature revealed that the current transport was affected by its own carriers and charge traps when the heterostructure was under low-resistance state, and the current decreased with decreasing temperature. Owing to the decrease in barrier height, the current increased with decreasing temperature under high-resistance state, with current transport properties exhibiting Schottky emission characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct Visualization of Li Dendrite Effect on LiCoO 2 Cathode by In Situ TEM

Li dendrites are known to cause deterious, and in many cases catastrophic, effect on the performance of Li rechargeable batteries. However, the mechanistic failure mechanism of cathodes upon in contact with Li metal is far from clear. In this study, using in situ transmission electron microscopy, we directly visualize at an atomic scale the interaction of Li dendrites with well-defined, epitaxial thin films of LiCoO2, the most widely used cathode material. We show that a spontaneous and prompt chemical reaction is trigged once the Li contact is made, leading to expansion and amorphization of the LiCoO2 structure, with Li2O and Co metal being the final reaction products. A topotactic phase transition is identified close to the reaction front, resulting in the formation of CoO as a metastable intermediate. Dynamic structural and chemical imaging in combination with ab inito simulations reveal that a high density of antiphase grain boundaries are formed at the reaction front, which are critical for enabling the short-range topotactic reactions and long-range Li propagation. The fundamental insights are of general importance in mitigating Li dendrites related issues and guiding the design principle for more robust energy materials.

In situ transmission electron microscopy (TEM), Li↗

Selective and Stable Non-Noble-Metal Intermetallic Compound Catalyst for the Direct Dehydrogenation of Propane to Propylene

A non-noble intermetallic compound catalyst consisting of Ni 3 Ga nanoparticles supported on Al 2 O 3 that exhibits high selectivity (~94%), comparable activity (TOF = 4.7 × 10 –2 s –1 ), good stability (~94% to 81% over the 82 h test), and regenerability in the direct dehydrogenation of propane to propylene at 600 °C has been developed. Through synthesis techniques that stabilize the Ni 3 Ga phase, the surface composition of the catalytic nanoparticles could be tuned by Ni and Ga loading such that improved selectivity toward propylene may be achieved. Comparisons with well-defined silica-supported Ni 3 Ga and NiGa catalysts and Ni 3 Ga/Al 2 O 3 with a range of Ni:Ga loading suggested that a specific surface composition range was most promising for propylene production. Furthermore the presence of Ni at the active particle surface was also found to be critical to drive dehydrogenation and enhance conversion, whereas the presence of Ga was necessary to attenuate the reactivity of the surface to improve selectivity and catalyst stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accessing crystal–crystal interaction forces with oriented nanocrystal atomic force microscopy probes

Biominerals serve as crucial structures of living systems and play an important role for biochemical processes. Understanding their crystallization mechanisms is therefore central to many areas of biology, biogeoscience and biochemistry. Some biominerals, such as bone and dentin, are hierarchical nanocomposite structures constructed by sequentially added individual oriented nanocrystals. The driving forces that enable this oriented assembly are still poorly understood, with advances in understanding limited in part by the availability of techniques that can precisely measure the delicate interactions between nanocrystals, as a function of their separation distance and mutual orientation. Here we provide a novel and comprehensive protocol for i.) fabricating oriented single nanocrystal atomic force microscopy (AFM) probes using focus ion beam (FIB) milling - probes that are capable of accessing the nanoscale forces between oriented single-crystal faces, and ii.) performing oriented nanocrystal interaction force measurements using dynamic force spectroscopy (DFS) and environmental transmission electron microscopy (ETEM)-AFM techniquqes. These methods have recently led to seminal breakthroughs in force quantification for understanding oriented aggregation at the nanoscale. First, we detail two FIB milling based methods to fabricate AFM nanocrystal probes. One method requires careful pre-coating with a protective layer to avoid FIB damage to the face of interest, which is later chemically removed, and the other entails removal of the FIB damage layer with in situ polishing. We illustrate how to fabricate oriented nanocrystal force probes using commercial bulk crystals or nano/micro-crystals of calcite, zinc oxide, and rutile; the methods are fully transferrable to the apatites comprising bone minerals. The typical protocol for fabricating one AFM crystal probe takes 2-3 h. Finally, we describe how to measure interaction forces between nanocrystals in solution conditions of interest by performing AFM based DFS, or in the controlled environment of ETEM, using the resulting oriented nanocrystal probes. In addition, we illustrate how to quantify the direction-specific interaction forces for a given pair of interacting oriented nanocrystal faces, and how to relate this information generally to understanding crystallization by particle attachment.

Zhang, Xin (ORCID:000000032000858X)↗

Electrochemical and Interfacial Behavior of All Solid State Batteries Using Li10SnP2S12 Solid Electrolyte

Thio-Lithium Superionic Conductor (Thio-LISICON) Li10GeP2S12 equivalent Li10SnP2S12 (LSPS) is comparable in ionic conductivity yet with a lower cost as an electrolyte for all solid-state batteries (ASSBs). ASSBs with LSPS solid electrolyte (SE), lithium-indium alloy anode, and LiCoO2 (LCO) cathode were successfully fabricated and their electrochemical performance at 60 °C was examined. Atomic layer deposition of Li3NbO4 on LCO was conducted to improve the interfacial stability. The Li3NbO4 coating significantly improves the cycle stability of the ASSB, which retains about 85% of the initial capacity after 70 cycles at a current density of 0.13 mA/cm2, while the ASSB with uncoated LCO retains ~ 60% of the initial capacity after 70 cycles. Electrochemical impedance spectroscopy tests indicate a rapid growth of charge transfer resistance upon cycling for the cell with the uncoated LCO, primarily due to the surface instability and build-up of a space charge layer between LSPS and LCO. However, the ASSBs with Li3NbO4 coated LCO show a more stable interface with a negligible impedance increase upon cycling, attributable to the buffering and passivating roles of the Li3NbO4 coating. The interfacial microstructure was analyzed to elucidate at the underlying reasons for the impedance increase and the pivotal role of the Li3NbO4 coating. Our study indicates that the surface coating significantly improves the cycle stability of the ASSBs with LSPS as the electrolyte, mostly due to an improvement of the charge transfer mechanism. The coating reduced the interphase thickness and the interfacial resistance to about a third of the uncoated one after 10 cycles.

Vinado, Carolina↗

Size-dependent dynamic structures of supported gold nanoparticles in CO oxidation reaction condition

Significance Gold is the noblest metal. However, when the size decreases to nanoscale and is supported on reducible oxides, the gold nanoparticle shows exceptionally high catalytic performance even at low temperatures. Here, through state-of-the-art in situ aberration-corrected environmental transmission electron microscopy and ab initio molecular-dynamic simulations, we discovered that, upon exposing to reactant gas (carbon monoxide and oxygen), ultrasmall gold clusters on ceria show a size-dependent order-to-disorder transformation with generation of dynamic low-coordinated atoms, which presumably can effectively boost the oxidation reaction of carbon monoxide. The findings provide much-needed insights on the origin of size-dependent catalytic properties of supported gold and demonstrate a size effect in absorbent–particle interactions that may widely exist and play an essential role in heterogeneous catalysts.

He, Yang↗

Interfacial morphology evolution in directionally solidified FeCrAl alloys

Highlights: • The variations of cellular/dendritic spacing with different Al contents and velocities were studied by experiments. • The experimental data were compared with the Hunt-Lu model. • The effect of Al content on the interfacial morphology evolution was discussed for the directional solidified FeCrAl alloys. - Abstract: Interfacial morphology evolution in FeCrAl alloys with varying Al content has been investigated by conducting a series of directional solidification experiments. A comparison between the experimental data and the Hunt-Lu model confirms that cellular spacing widens while dendritic spacing narrows as Al content of the alloy increases. The ratio of upper and lower limit cellular/dendritic spacing λ{sub max}/λ{sub min} is only weakly dependent on growth velocity and Al content. Under the experimental conditions in the present study, cell to dendrite transition (CDT) occurs at a growth velocity between 25 μm/s and 50 μm/s, and dendrite to cell transition (DCT) is observed at a growth velocity less than 100 μm/s. Critical spacing of CDT λ{sub cd} and local solidification time (LST) t{sub f} are used to discuss the influence of Al content on CDT and DCT respectively. The transition between non-planar and planar interface of the alloy is investigated based on the interface stabilization theory of Mullins and Sekerka.

36 MATERIALS SCIENCE↗