Size and oxidation state tracking of dynamic Rh catalysts on rutile TiO2 by ambient-pressure XPS
Explore the source record for details and available documents.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Engineering topics
Head, Ashley R.
Publications and source records attributed to Head, Ashley R..
The surface chemistry of cuprous oxide
The chemical and electronic properties of copper combined with its large natural abundance lend this material to impact a wide range of technological applications, including heterogeneous catalysis. The reactivity of copper in its Cu 1+ oxidation state makes this specific configuration relevant in various chemical reactions, but the facile redox properties of copper make the isolation of individual states for fundamental studies difficult. Here, in this study, we review three Cu 2 O model systems used to study the interaction of Cu 1+ with small molecules making use of surface science techniques: Cu 2 O/Cu(111), thin polycrystalline Cu 2 O films on Cu foil, and bulk Cu 2 O crystals. Advantages and disadvantages of each system are discussed and exemplified through case studies of chemical adsorption and reactivity studies.
36 MATERIALS SCIENCE↗
Chemical state of nickel nanoparticles during the oxygen evolution reaction in a carbonate-bicarbonate buffer solution
The chemical state of nickel anodes during the oxygen evolution reaction can impact their electrocatalytic performance. Here, X-ray photoelectron and absorption spectroscopies reveal the chemical state of nickel nanoparticles under oxygen evolution reaction conditions in amildly alkaline carbonate-bicarbonate buffer solution. Ni 2+ and Ni 3+ species are observed at the reaction onset potential with a 7:4 ratio, with no remaining metallic nickel. These species include NiO, which increasingly converts to other Ni 2+ and Ni 3+ species once the potential is increased above the onset potential. Conversely, when a 20-nm-thick nickel film is used instead of nickel nanoparticles, a significant amount of metallic nickel remains in the inner layers. Nickel nanoparticles also undergo significant morphological and structural changes during the reaction, as evidenced by ex situ transmission electron microscopy. Amorphization of the nanoparticles is attributed to significant H 2 O incorporation, with the oxygen intensity increasing both in operando and ex situ measurements.
36 MATERIALS SCIENCE↗
Operando XPS for Plasma Process Monitoring: A Case Study on the Hydrogenation of Copper Oxide Confined under h-BN
Here, we demonstrate that ambient pressure x-ray photoelectron spectroscopy (APXPS) can be used for in situ studies of dynamic changes in surface chemistry in a plasma environment. This opens a new and vast application space for XPS and greatly complements modern spectroscopy techniques to probe plasma-solid/liquid interactions relevant to process monitoring in the semiconductor industry, bio-medical plasma applications and plasma remediation technologies. Hexagonal boron nitride (h-BN) grown on Cu was used in this study as a well-defined model system for plasma process monitoring and because of its unique chemical, optical and electrical properties that make it a prospective material for advanced electronics. To better understand the stability and surface chemistry of h-BN during plasma assisted processing, we track in real time the plasma-induced chemical state changes of B, N and the underlying Cu substrate using APXPS equipped with an AC discharge plasma source operating at 13 Pa. Residual gas analysis (RGA) mass-spectra were concurrently collected during plasma-XPS to track reaction products formed during plasma exposure. A clear reduction of Cu x O is seen, while an h-BN layer remains intact, suggesting hydrogen radical (H • ) species can attack the exposed and h-BN covered Cu oxide patches and partially reduce the underlying substrate without significantly damaging the overlaying h-BN, which is of practical importance for development of h-BN encapsulated devices and interfaces. In addition to demonstration of plasma-XPS capabilities we discuss the observed challenges (e.g., parasitic plasma-chamber walls reactions and charging effects) and propose potential solutions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Molecular-level insights into CO 2 activation on Ni(111) from in situ infrared spectroscopy
The activation of CO 2 on nickel surfaces is the first step of various CO 2 conversion processes. Consequently, understanding the surface intermediates formed during this step and their adsorption sites is crucial for elucidating reaction mechanisms. In this study, we employ in situ infrared spectroscopy to investigate the interaction of 1 mbar CO 2 with a model Ni(111) catalyst between 25°C and 300°C. Under these conditions, CO 2 is activated via a direct dissociation into CO and atomic oxygen, while the oxidation state of the Ni(111) surface is primarily determined by residual H 2 and O 2 . The high surface coverage of CO and oxygen at ambient CO 2 pressure induces a competitive adsorption mechanism on the energetically favored hollow sites. This mechanism leads to a temperature-dependent distribution of CO between top and hollow sites, potentially explaining the effect of reaction conditions on the adsorption site of CO intermediates in CO 2 conversion reactions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Ultrathin Magnesium-Based Coating as an Efficient Oxygen Barrier for Superconducting Circuit Materials
Scaling up superconducting quantum circuits based on transmon qubits necessitates substantial enhancements in qubit coherence time. Over recent years, tantalum (Ta) has emerged as a promising candidate for transmon qubits, surpassing conventional counterparts in terms of coherence time. However, amorphous surface Ta oxide layer may introduce dielectric loss, ultimately placing a limit on the coherence time. In this study, a novel approach for suppressing the formation of tantalum oxide using an ultrathin magnesium (Mg) capping layer is presented. Synchrotron-based X-ray photoelectron spectroscopy studies demonstrate that oxide is confined to an extremely thin region directly beneath the Mg/Ta interface. Additionally, it is demonstrated that the superconducting properties of thin Ta films are improved following the Mg capping, exhibiting sharper and higher-temperature transitions to superconductive and magnetically ordered states. Moreover, an atomic-scale mechanistic understanding of the role of the capping layer in protecting Ta from oxidation is established based on computational modeling. Further, this work provides valuable insights into the formation mechanism and functionality of surface tantalum oxide, as well as a new materials design principle with the potential to reduce dielectric loss in superconducting quantum materials. Ultimately, the findings pave the way for the realization of large-scale, high-performance quantum computing systems.
36 MATERIALS SCIENCE↗
Impact of Varying the Photoanode/Catalyst Interfacial Composition on Solar Water Oxidation: The Case of BiVO 4 (010)/FeOOH Photoanodes
Photoanodes used in a water-splitting photoelectrochemical cell are almost always paired with an oxygen evolution catalyst (OEC) to efficiently utilize photon-generated holes for water oxidation because the surfaces of photoanodes are typically not catalytic for the water oxidation reaction. Suppressing electron–hole recombination at the photoanode/OEC interface is critical for the OEC to maximally utilize the holes reaching the interface for water oxidation. Here, in order to explicitly demonstrate and investigate how the detailed features of the photoanode/OEC interface affect interfacial charge transfer and photocurrent generation for water oxidation, we prepared two BiVO 4 (010)/FeOOH photoanodes with different Bi:V ratios at the outermost layer of the BiVO 4 interface (close to stoichiometric vs Bi-rich) while keeping all other factors in the bulk BiVO 4 and FeOOH layers identical. The resulting two photoanodes show striking differences in the photocurrent onset potential and photocurrent density for water oxidation. The ambient pressure X-ray photoelectron spectroscopy results show that these two BiVO 4 (010)/FeOOH photoanodes show drastically different Fe 2+ :Fe 3+ ratios in FeOOH both in the dark and under illumination with water, demonstrating the immense impact of the interfacial composition and structure on interfacial charge transfer. Using computational studies, we reveal the effect of the surface Bi:V ratio on the hydration of the BiVO 4 surface and bonding with the FeOOH layer, which in turn affect the band alignments between BiVO 4 and FeOOH. These results explain the atomic origin of the experimentally observed differences in electron and hole transfer and solar water oxidation performance of the two photoanodes having different interfacial compositions.
14 SOLAR ENERGY↗
Interaction of Anisole on Alumina-Supported Ni and Mo Oxide Hydrodeoxygenation Catalysts
The conversion of biomass to transportation fuels and value-added chemicals is a promising method to reduce reliance on fossil fuels. Mo-based catalysts have been shown to be highly active in the hydrodeoxygenation of biomass-derived phenolic compounds. The catalyst active phase, surface species, and the effect of adding additional metals is not comprehensively understood. Here we compare the temperature-dependent adsorption behavior of the model compound anisole 2 on an alumina-supported mixed nickel molybdenum oxide catalyst with two reference catalysts of molybdenum oxide and nickel oxide. Raman spectroscopy showed that the catalysts contain significant amounts of molybdates and molybdoaluminates, in addition to NiMoO 4 in the nickel molybdenum catalyst and MoO 3 in the molybdenum-only catalyst. Using transmission infrared spectroscopy under a controlled environment, we find that anisole chemisorbed largely through the oxygen in the methoxy group to form surface-bound phenoxy and methoxy species on all the catalysts. Ambient pressure X-ray photoelectrons spectroscopy measurements of the catalysts in anisole vapor showed reduced Mo atoms are the binding sites. The surface interaction and removal temperature of these species varied with the metal composition. The MoO x component dominated the adsorption behavior in both MoO x and NiMoO x catalysts. The formation of new aromatics, including methylated rings, depended on Ni composition. Upon adding hydrogen to induce the hydrodeoxygenation of anisole, undesirable polynuclear aromatic species were quickly formed on the Mo-based catalysts. In conclusion, these results suggest that the molybdenum oxide controls the adsorption and reactivity of the surface species, with a cooperative effect by Ni.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Adapting an Electron Microscopy Microheater for Correlated and Time-Resolved Ambient Pressure X-ray Photoelectron Spectroscopy
Environmental transmission electron microscopy (ETEM) can follow structural and chemical changes in nanomaterials under reaction conditions, including at temperatures up to 1300 °C and pressures up to ~20 mbar. However, ETEM studies are limited to localized areas of a sample and can benefit from correlative studies of a similar sample on larger length scales. Here, in this work, we describe the customization of a commercial microheater holder used in ETEM to anode-based ambient pressure X-ray photoelectron spectroscopy (APXPS), where chemical and electronic structure information is averaged over several hundred square micrometers. To benchmark heating capabilities in the APXPS instrument, core level binding energies were followed during surface chemical reactions of a Pd film, including CO adsorption–desorption, Pd oxidation, and PdO reduction. The fast heating feature of the microheaters advanced XPS experimental capabilities, including the collection of subsecond time-resolved spectra of the Pd 3d 5/2 peak during the reduction of an oxidized Pd film. The potential to use these heaters in a closed gas cell was also demonstrated by oxidizing Pd in a partial pressure of air locally dosed to the sample surface. General tips and considerations for the application of commercial ETEM heaters to any XPS system with a focused X-ray beam are discussed.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Chemical Profiles of the Oxides on Tantalum in State of the Art Superconducting Circuits
Abstract Over the past decades, superconducting qubits have emerged as one of the leading hardware platforms for realizing a quantum processor. Consequently, researchers have made significant effort to understand the loss channels that limit the coherence times of superconducting qubits. A major source of loss has been attributed to two level systems that are present at the material interfaces. It is recently shown that replacing the metal in the capacitor of a transmon with tantalum yields record relaxation and coherence times for superconducting qubits, motivating a detailed study of the tantalum surface. In this work, the chemical profile of the surface of tantalum films grown on c‐plane sapphire using variable energy X‐ray photoelectron spectroscopy (VEXPS) is studied. The different oxidation states of tantalum that are present in the native oxide resulting from exposure to air are identified, and their distribution through the depth of the film is measured. Furthermore, it is shown how the volume and depth distribution of these tantalum oxidation states can be altered by various chemical treatments. Correlating these measurements with detailed measurements of quantum devices may elucidate the underlying microscopic sources of loss.
36 MATERIALS SCIENCE↗
Tuning the surface reactivity of oxides by peroxide species
The Mars–van Krevelen mechanism is the foundation for oxide-catalyzed oxidation reactions and relies on spatiotemporally separated redox steps. Herein, we demonstrate the tunability of this separation with peroxide species formed by excessively adsorbed oxygen, thereby modifying the catalytic activity and selectivity of the oxide. Using CuO as an example, we show that a surface layer of peroxide species acts as a promotor to significantly enhance CuO reducibility in favor of H 2 oxidation but conversely as an inhibitor to suppress CuO reduction against CO oxidation. Together with atomistic modeling, we identify that this opposite effect of the peroxide on the two oxidation reactions stems from its modification on coordinately unsaturated sites of the oxide surface. By differentiating the chemical functionality between lattice oxygen and peroxide, these results are closely relevant to a wide range of catalytic oxidation reactions using excessively adsorbed oxygen to activate lattice oxygen and tune the activity and selectivity of redox sites.
36 MATERIALS SCIENCE↗
Revealing the Role of CO during CO 2 Hydrogenation on Cu Surfaces with In Situ Soft X-Ray Spectroscopy
Not Available
36 MATERIALS SCIENCE↗
Active site identification and CO oxidation in UiO-66-XX thin films
Metal-organic frameworks (MOFs) offer an intrinsically porous and chemically tunable platform for gas adsorption, separation, and catalysis. Herein we investigate thin film derivatives of the well-studied Zr–O based MOF powders to understand their adsorption properties and reactivity with their adaption to thin films, involving diverse functionality with the incorporation of different linker groups and the inclusion of embedded metal nanoparticles: UiO-66, UiO-66-NH 2 , and Pt@UiO-66-NH 2 . Using transflectance IR spectroscopy, we determine the active sites in each film upon consideration of the acid-base properties of the adsorption sites and guest species, and perform metal-based catalysis with CO oxidation of a Pt@UiO-66-NH 2 film. Our study shows how surface science characterization techniques can be used to characterize the reactivity and the chemical and electronic structure of MOFs.
36 MATERIALS SCIENCE↗
Disordered Au Nanoclusters for Efficient Ammonia Electrosynthesis
The electrochemical nitrogen (N 2 ) reduction reaction (N 2 RR) under mild conditions is a promising and environmentally friendly alternative to the traditional Haber-Bosch process with high energy consumption and greenhouse emission for the synthesis of ammonia (NH 3 ), but high-yielding production is rendered challenging by the strong nonpolar N≡N bond in N 2 molecules, which hinders their dissociation or activation. In this study, disordered Au nanoclusters anchored on two-dimensional ultrathin Ti 3 C 2 T x MXene nanosheets are explored as highly active and selective electrocatalysts for efficient N 2 -to-NH 3 conversion, exhibiting exceptional activity with an NH 3 yield rate of 88.3±1.7 μg h –1 mg cat. –1 and a faradaic efficiency of 9.3±0.4 %. Further, a combination of in situ near-ambient pressure X-ray photoelectron spectroscopy and operando X-ray absorption fine structure spectroscopy is employed to unveil the uniqueness of this catalyst for N 2 RR. The disordered structure is found to serve as the active site for N 2 chemisorption and activation during the N 2 RR process.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗