Search NASA⌕ Search

Engineering topics

Heatherly, Jr, Lee

Publications and source records attributed to Heatherly, Jr, Lee.

Effect of boron on the fracture behavior and grain boundary chemistry of Ni3Fe

The effect of B on the fracture behavior of Ni{sub 3}Fe alloys (24 and 26 at.% Fe) was studied after cathodic charging with hydrogen. In contrast to its disordered state, ordered Ni{sub 3}Fe underwent brittle intergranular fracture at room temperature. Boron addition changed its fracture mode to predominantly ductile transgranular. The grain boundary chemistry of ordered Ni{sub 3}Fe was analyzed by Auger electron spectroscopy. Boron was found to segregate to the grain boundaries of both Ni-24Fe and Ni-26Fe and reduce the hydrogen-induced embrittlement of these alloys in the ordered state.

08 HYDROGEN↗

Polarization Manipulation via Orientation Control in Polycrystalline BiFeO 3 Thin Films on Biaxially Textured, Flexible Metallic Tapes

(111)-, (101)-, and (001)-oriented polycrystalline BiFeO3 films were fabricated on rolling-assisted biaxially textured substrates (RABiTS) with appropriate, buffer layer engineering of heteroepitaxially grown buffer multilayers on RABiTS. The crystallographic orientation and polarization direction were confirmed using X-ray diffraction and piezoresponse force microscopy (PFM), respectively. All the films exhibited excellent ferroelectric properties. Switching spectroscopy PFM demonstrated that the switching polarization in (111)-oriented polycrystalline BiFeO3 films is higher than (101) or (001) oriented films. These high-quality, BiFeO3 films on low-cost, flexible, biaxially textured metallic tapes with controllable orientation and polarization are attractive for application in flexible ferroelectric devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Heteroepitaxial film crystal silicon on Al2O3 for solar cells on cube-textured metal foil

Crystal silicon is an excellent photovoltaic (PV) semiconductor: silicon is abundant, environmentally benign, capable of high solar conversion efficiencies, and profits from an unparalleled scientific knowledge base. However, the energy-intensive, inefficient and expensive processes that turn sand into a crystal silicon (c-Si) wafer account for more than half of today s Si PV module costs. Because the peak flux of solar energy on Earth is only about 1 kW/m2, large areas must be covered with inexpensive PV to provide for TW-scale electrical power needs. To circumvent the costly wafer fabrication step, it would be ideal to grow 2-20 micron thick PV-quality silicon absorber layers directly from silane gas onto inexpensive substrates at temperatures below 800 C.

14 SOLAR ENERGY↗

Strategic Buffer Layer Development for YBCO Coated Conductors

We have developed a simplified buffer layer architecture for the rolling-assisted biaxially textured substrates (RABiTS) template approach. The overall purpose of this research is to enable potentially a low-cost, high throughput and high yield manufacturing processes for buffer fabrication and to gain fundamental understanding of the growth of buffer layers for RABiTS templates. This understanding is critical to the development of a reliable, robust, and long-length manufacturing process for second generation wires. In this study, efforts are being made to either reduce the number of vacuum deposited layers or to replace one or more of these vacuum deposited layers with a solution based layer. We have chosen Gd{sub 2}O{sub 3} - ZrO{sub 2} system as a potential barrier layer for this study. We have deposited epitaxial Gadolinia Stabilized Zirconia (GSZ) (Zr{sub 1-x}Gd{sub x}O{sub y}; x = 0-1) films on 30-nm thick e-beam evaporated Y{sub 2}O{sub 3} seeded Ni-W (3 at. %) (Ni-3W) substrates using a metal-organic decomposition (MOD) process. Detailed X-ray studies indicated that all of the MOD-GSZ layers were cube textured and both in-plane and out-of-plane lattice parameters increases linearly with increasing the Gd content. We have also developed process conditions for reactively sputter deposited epitaxial Gd{sub 2}Zr{sub 2}O{sub 7} (Gadolinium Zirconium Oxide (GZO); Zr{sub 1-x}Gd{sub x}O{sub y} (x = 0.5)) films on the e-beam evaporated Y{sub 2}O{sub 3}/Ni - 3W substrates. YBCO films with a critical current density J{sub c} of 2.14 times 10{sup 6} A/cm{sup 2} and 1.4 times 10{sup 6} A/cm{sup 2} at 77 K and self-field were grown on the newly developed architectures of Gd{sub 2}Zr{sub 2}O{sub 7}/Y{sub 2}O{sub 3}/Ni - 3W and Zr{sub 1-x}Gd{sub x}O{sub y} (x = 0.2)/Y{sub 2}O{sub 3}/Ni - 3W substrates, respectively using a pulsed laser deposition (PLD) process. This work promises a route for producing cost-effective simplified buffer architectures for the RABiTS-based YBCO coated conductors.

36 MATERIALS SCIENCE↗