Search NASA⌕ Search

Engineering topics

Heinrichs, David P.

Publications and source records attributed to Heinrichs, David P..

At least 19 records

Integral Experiment Final Design for Thermal/Epithermal eXperiments with 233U3O8 ZPR Fuel Elements and Polyethylene (IER-329 CED-2 Report)

This report documents the integral experiment final design for IER-329, Thermal/Epithermal eXperiments (TEX) with 233 U 3 O 8 Zero Power Reactor (ZPR) Fuel Elements and Polyethylene. IER-329 (TEX-23) is the third baseline design in the Thermal/Epithermal eXperiments (TEX) series led by Lawrence Livermore National Laboratory (LLNL) and funded by the DOE’s Nuclear Criticality Safety Program. This experiment was designed to address the existing 233U integral benchmark experiments over prediction in k eff by up to 2% for thermal systems and under-prediction in k eff by up to 4% for intermediate systems. The TEX-23 design utilizes assemblies of 233 U 3 O 8 Zero Power Reactor (ZPR) fuel elements moderated and reflected by high-density polyethylene. This design is similar to the existing TEX-Pu and TEX-HEU designs, utilizing an adjustable moderator to tune the neutron energy spectra and modular layers for the incorporation of diluent materials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TEX-HEU Baseline Assemblies: Highly Enriched Uranium Plates with Polyethylene Moderator and Polyethylene Reflector (IER-297 CED-4b Report)

This experiment provides the baseline experimental configurations for TEX-HEU. The purpose of the TEX-HEU design is to provide multiple configurations that span the entire neutron energy spectrum and can be easily modified to incorporate diluent materials. Future experiments utilizing the TEX-HEU design are planned to incorporate hafnium, lithium, and chlorine as diluent materials. Five experimental configurations were judged to be acceptable critical benchmark experiments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Integral Experiment Final Design for Thermal/Epithermal eXperiments (TEX) Plutonium Additional Mixed Spectrum Configurations

This report presents the final design (CED-2) for three additional mixed-spectra configurations for plutonium Thermal/Epithermal eXperiments (TEX) to target the intermediate energy region (IER-553). The baseline cases of IER-184 (PU-MET-MIXED-002 [2]) spanned the entire fission energy spectrum. Case 3, which had a median fission energy (MFE) of approximately 6E-5 MeV and had a fission fraction of about 42% in the intermediate energy range, resulted in a $k_{eff}$ overestimation of 1.1%. Compared to 749 previous ICSBEP plutonium benchmarks, the baseline cases accurately predicted the experiments in the thermal and fast regions where the majority of benchmarks inhabit. The benchmarks in the intermediate energy region to date are sparse and overestimate $k_{eff}$ with an average C/E between 1.02 and 1.03. The additional proposed configurations span the whole of the intermediate energy region. The experimental design utilizes the plutonium/aluminum metal alloy Zero Power Physics Reactor (ZPPR) Plutonium-Aluminum No-Nickel (PANN) plates with varying polyethylene moderator thicknesses to span the intermediate fission energy region. Each of the cases have varying fractions of thermal, intermediate, and fast fissions. The designs were chosen to maximize the intermediate energy fraction. The experiment will take place on the universal critical assembly machine, Planet. The layers will be split as equally as possible between the lower platen and the upper stationary platform of Planet. The upper half of the experimental configuration will also have an upper reflector of polyethylene of specified thicknesses to achieve criticality when the lower platen is raised fully. The previous IER-184 configurations, specifically Case 3, were used to determine the configurations for the additional experiments and neutronics calculations were used to fine-tune the configurations to ensure criticality. The quadrature sum uncertainty in Δ$k_{eff}$ for Case 3 in PU-MET-MIXED-002 was found to be 0.00219. Section 3.8 gives a detailed description of the uncertainties calculated. The additional configurations, which are based directly on Case 3, are expected to have similar uncertainties. However, it is possible to reduce the overall uncertainty of Δ$k_{eff}$ for the additional configurations using the knowledge obtained from the calculations in the benchmark.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Integral Experiment Request 305 CED-3a Summary Report

Under IER-305, critical experiments will be done with and without molybdenum sleeves on 7uPCX fuel rods. New critical assembly hardware has been designed and procured to accomplish the experiments with the fuel supported by in a 1.55 cm triangular-pitched array.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integral Experiment Request 305: CED-3b Summary Report

Under IER-305, critical experiments were done with and without molybdenum sleeves on 7uPCX fuel rods. The experiments were done in new critical assembly hardware designed to support the 7uPCX fuel in a 1.55 cm triangular-pitched array.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of Polyethylene and Blank Pulsed Sphere Experiments Using Deuteron Transport Feature in COG

From the late 1960s to about 1985, LLNL undertook a series of ‘pulsed sphere’ experiments for 31 materials involving 148 different experiments using 75 different spheres. The purpose was to measure the neutron leakage spectra for different materials from 14-MeV neutrons generated by 3 H(d,n) 4 He reactions induced by an incident D+ beam from the Insulated Core Transfer (ICT) accelerator at LLNL. This deuteron beam was focused to impinge upon tritium loaded onto a titanium substrate within a low mass target assembly placed within the center of a spherical shell constructed from the material of interest. COG is a three-dimensional, continuous energy, Monte Carlo code, developed by Lawrence Livermore National Laboratory (LLNL). Recent additions to COG include alpha and deuteron particle transport in order to directly calculate (α,n) and 3 H(d,n) 4 He reactions, and resulting neutron emission spectra. Results of the direct deuteron transport calculation for the 0.8 MFP (mean free path) polyethylene sphere with PILOT B detector was previously published. The purpose of this paper is to present expanded COG results showing the neutron peak from deuterium buildup ( 2 H(d,n) 3 He) due to tritium decay in the target. Cross section data libraries used are ENDF/B-VIII.0 for neutrons and ENDF/B-VII.1 for deuterons, respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

IER-539 CED-1: Preliminary Design of a New Horizontal Split Table

This report presents the preliminary design (CED-1) of IER-539, focused on a new Horizontal Split Table (HST) critical assembly machine. The Department of Energy (DOE) National Nuclear Criticality Safety Program (NCSP) funds critical experiment R&D and its Mission and Vision document identifies a long-standing technical gap of a general purpose HST. HSTs have historically been used for experiments that are impractical to assemble on a vertical lift machine (VLM), usually due to their large physical size or weight. While many HSTs were historically employed in the US (including at LLNL), there are currently no surviving HSTs in the US. While there are two critical experiments facilities remaining in the US, the National Critical Experiments Research Center (NCERC) operated by LANL and the Critical Experiments Facility (CX) operated by SNL, these facilities are not equipped with a general purpose HST. There are a number of experiment designs that require an HST, including needs for Defense Programs and Nuclear Energy. Lack of an HST constraints the national ability to perform large and heavy experiments. Large footprints are needed to successfully create mockup experiments for advanced reactors (mock-up cold critical reactor cores, which is a urgent need for new reactor designs using novel materials and longer cycle lengths), to create solution experiments in lattices, or to test nuclear data of heavy metals. A new HST is a vital piece of criticality experiment infrastructure that would allow for the conduct of integral critical experiments to address needs in the nuclear criticality safety, nuclear data, and other DOE stakeholder communities.

42 ENGINEERING↗

TEX-HEU: Integral Experiments with Highly Enriched Uranium and Polyethylene (IER-297 CED-3b Report)

This report documents the experimental critical configurations and measurements for IER-297, Thermal/Epithermal eXperiments (TEX) using highly enriched uranium (HEU) fuel, moderated and reflected by polyethylene. These experiments establish the baseline TEX-HEU configurations spanning thermal, intermediate, and fast fission energy regimes. The experiment campaign was completed in FY2020 at the National Critical Experiments Research Center at the Nevada National Security Site. The campaign produced six documented critical configurations (0”, ¹/₈” A, ¹/₈” B, ¹/₄”, ¹/₂”, and 1¹/₂”) and one reproducibility measurement (¹/₈” R). Table 1 summarizes these seven experiments along with their period and calculated reactivity, in order of execution. The Comet General Purpose Critical Assembly Machine was used to conduct the TEX-HEU experiments. The HEU fuel consists of U(93+) plates, collectively known as the “Jemima” plates. Each experiment consisted of an alternating stack of these HEU plates with or without polyethylene moderator plates. By varying the thicknesses of the polyethylene plates, the neutron spectrum of the experiment could be fine-tuned to a specific fission energy regime. The experiments were reflected by 1” of polyethylene consisting of a bottom and top plate and outer reflector rings to surround the HEU and polyethylene plates. The fine reactivity control of the system was provided by the thickness of the top reflector plate, which could be varied in increments of ¹/₃₂”.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pitch Variation Experiments in Water-Moderated Square-Pitched U(6.9)O 2 Fuel Rod Lattices with Fuel to Water Volume Ratios Spanning 0.08 to 0.67

The US Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories. The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5% 235 U. The 7uPCX assembly is a water-moderated and -reflected array of aluminum-clad square-pitched U(6.90%)O 2 fuel rods. Other critical experiments performed in the 7uPCX assembly are documented in LEU-COMP-THERM-078, LEU-COMP-THERM-080, LEU-COMPTHERM- 096, LEU-COMP-THERM-097, and LEU-COMP-THERM-101. The twenty-seven critical experiments in this series were performed in 2020 in the SCX at the Sandia Pulsed Reactor Facility. The experiments are grouped by fuel rod pitch. Case 1 is a base case with a pitch of 0.8001 cm and no water holes in the array. Cases 2 through 6 have the same pitch as Case 1 but contain various configurations with water holes, providing slight variations in the fuel-to-water ratio. Similarly, Case 7 is a base case with a pitch of 0.854964 cm and no water holes in the array. Cases 8 through 11 have the same pitch as Case 7 but contain various configurations with water holes. Cases 12 through 15 have a pitch of 1.131512 cm and differ according to the number of water holes in the array, with Case 12 having no water holes. Cases 16 through 19 have a pitch of 1.209102 cm and differ according to number of water holes in the array, with Case 16 having no water holes. Cases 20 through 23 have a pitch of 1.6002 cm and differ according to number of water holes in the array, with Case 20 having no water holes. Cases 24 through 27 have a pitch of 1.709928 cm and differ according to number of water holes in the array, with Case 24 having no water holes. As the experiment case number increases, the fuel-to-water volume ratio decreases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of Nuclear Data Covariances on Integral Experiment Design with Sensitivity and Uncertainty Analysis

Washington River Protection Solutions (WRPS) uses MCNP6.2 and the Whisper code for criticality safety analyses of the Hanford Tank Farm. Together the codes derive baseline upper subcritical limits (USLs) for the waste models using experimental benchmarks. Whisper returns higher USLs, i.e. , has less of a conservative penalty, when the neutronic similarity of the experimental benchmarks to the application is high. Unfortunately, few critical benchmarks have high similarity to the Hanford tanks. The waste in the tanks is highly dilute in plutonium and contains large masses of weakly neutron-absorbing elements like iron and manganese. Experimental benchmarks typically have low sensitivity to these absorbers because they are present as structural materials. Lacking similar benchmarks, new Thermal Epithermal eXperiment (TEX) configurations with high Pu content and interstitial iron absorbers have been designed for the criticality safety validation. The features of the design have been iterated upon to maximize the similarity between the experiment and different Hanford waste models. The similarity is quantified with sensitivity analysis and uncertainty quantification using the representativity coefficient, or c k . The representativity calculation requires nuclear data covariances, which may differ between nuclear data libraries and between library versions. Because of these variations, the optimal design may depend on the nuclear data covariances library. A scenario can be envisioned where an experiment is designed, and c k is maximized, with one set of covariance data. However, when the covariance data is changed, say from ENDF/B-VII.1 to ENDF/B-VIII.0, and the benchmark is used in a criticality safety evaluation, the experiment becomes suboptimal with respect to c k . In this paper, we present how the optimal design of the new TEX experiments varied depending on the nuclear data covariances used to calculate c k . We compare ENDF/B-VII.1 and ENDF/B-VIII.0, as if the library had been updated since the design of the experiment. Additionally, we use JEFF3.3 to simulate if the covariance data of a different library had been used. The results show that the covariances do have an important effect on the designs, less so for thermal systems (where the data are more consistent between evaluations) and more so for epithermal systems where more differences exist.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TEX-HEU: Integral Experiments with Highly Enriched Uranium and Polyethylene [Slides]

This presentation discusses Thermal/Epithermal eXperiments (TEX) in relation to integral experiments spanning a wide range of fission energy spectra utilizing existing NCSP fissile material assets, TEX-Pu for plutonium, and TEX-HEU highly enriched uranium (HEU) for highly enriched uranium. It also discusses the TEX-HEU design, the use of HEU fuel, and polyethylene parts. The experiment, executed in the Nuclear Criticality Experiment Research Center of the Nevada National Security Site is discussed, specifically how it was assembled on the Comet Universal Critical Assembly Machine. Measured quantities and various critical configurations are listed. In conclusion, the presentation states that they successfully assembled and documented the baseline TEX-HEU experiments, that six critical configurations and one reproducibility measurement were produced, and that they are compiling results to submit to the International Criticality Safety Benchmark Evaluation Project. A future experiment campaign is planned in 2021 with Hafnium as a diluent.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Data Testing of Polyethylene Thermal Scattering Law with New Thermal Epithermal eXperiments (TEX) Plutonium Baseline Benchmark, PU-MET-MIXED-002

Five plutonium baseline experiments completed in September of 2018 from the Thermal Epithermal eXperiments (TEX) program have been accepted by the International Criticality Safety Benchmark Evaluation Project as PU-MET-MIXED-002 and will be included in the 2020 version of the handbook. The experiments were made up of stacked layers of plutonium Zero Power Physics Reactor (ZPPR) plates moderated by polyethylene (PE, chemical formula C2H4) to varying degrees to create configurations with five different neutron spectra, including one fast configuration, one thermal configuration, and three mixed configurations. Calculations of the benchmark show overprediction of k eff when using the most recent release of the Evaluated Nuclear Data File Version B (ENDF/B) library release (VIII.0) cross sections, particularly when compared to the previous ENDF/B-VII.1 results. One potential source of overprediction was hypothesized to be the new Molecular Dynamics (MD) generated PE Thermal Scattering Law (TSL). The overprediction was shown via calculation to not be caused by the new ENDF/B-VIII.0 thermal scattering law, and in fact the overprediction was mitigated by the new PE TSL.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pitch Variation Experiments in Water-Moderated Square-Pitched U(6.90)O 2 Fuel Rod Lattices with Fuel to Water Volume Ratios Spanning 0.08 to 0.67

The US Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories. The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5 % 235 U. The 7uPCX assembly is a water-moderated and -reflected array of aluminum-clad square-pitched U(6.90 %)O 2 fuel rods. Other critical experiments performed in the 7uPCX assembly are documented in LEU-COMP-THERM-078, LEU-COMP-THERM-080, LEU-COMPTHERM- 096, LEU-COMP-THERM-097, and LEU-COMP-THERM-101. The fuel used in these experiments was fabricated using unirradiated 6.90 % enriched UO 2 fuel pellets from fuel elements designed to be used in the internal nuclear superheater section of the Pathfinder boiling water reactor operated in South Dakota by the Northern States Power Company in the 1960s. The fuel elements were obtained from The Pennsylvania State University where they had been stored for many years. The fuel pellets in those fuel elements were removed from the original Incoloy cladding and reclad in 3003 aluminum tubes and end caps for use in the experiments reported here. The purpose of these experiments was to measure the effects of decreasing the fuel-to-water volume ratio on the critical array size. This was accomplished by removing fuel rods from fully fueled configurations, effectively increasing the pitch of the fuel arrays in the assembly. The fuel rod pitch variations provided assembly configurations that ranged from strongly undermoderated to slightly overmoderated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integral Experiment Request 230 CED-3a (Summary Report)

During CED-3a, the following information is required, as specified in the April 1,2016 revision of the CEdT process manual: A detailed cost estimate; and, A resource loaded(baseline) schedule for execution of the experiment, data analysis, and publication. Appendix I is a Gantt chart or various phases of the project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integral Experiment Request 230 CED-2 Summary Report

A method is described to test the effect of increased moderation on the 7uPCX critical arrays using the existing assembly hardware. The proposed experiments will allow the exploration of the assembly fuel-to-water ratio out to, and possibly beyond, optimum moderation in the assembly. A significant result reported below is that the total uncertainty in the benchmark k eff in some of these experiments is reduced by about a factor of two compared to the uncertainties obtained in the fully-reflected experiments done to date.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Seventy-Five Years of Nuclear Criticality Safety Documents - A Bibliography

A collection of nuclear criticality documents was begun in the 1970s at the University of California’s Lawrence Livermore Laboratory (now Lawrence Livermore National Laboratory). Documents in this bibliography are dated as early as 1940. The early documents described experimental work that was of vital importance to the safe use of fissile materials at nuclear reactors, the facilities for preparing or transporting nuclear fuel, or its eventual storage. The experiments were of direct value to support safe operations with fissile material, but they were also needed for validating early physics data and calculational methods and then for validating computational methods used in criticality safety evaluations. Bibliographic information from the past seventy-five years have been entered into a computerized bibliographic database. The database continues to expand. Publications were issued several decades ago based on the information collected at that time. Our new publication is based on a current “snapshot” of the present status of the database. Contributions of information or corrections to this bibliography will be appreciated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

IER-407 CED-3b Rev-1: Experiment Execution Report for the Inherently Safe Subcritical Assembly (ISSA) Subcritical Measurements

This set of benchmark subcritical multiplicity experiments was conducted at the ISSA experiment center of Lawrence Livermore National Laboratory. The purpose of these subcritical experiments, as described in the ISSA final design report, was to measure fission neutrons by collecting time-tagged data corresponding to a maximum multiplication of approximately 20. The fission source for this experiment was Materials Test Reactor (MTR)-type highly enriched uranium fuel assembly, which is composed of nineteen fuel plates. One, two, four, six and nine ISSA fuel assemblies were closely packed and loaded inside a support fixture assembly and immersed in water. Four 3 He proportional counters were placed around the fuel assemblies, and list-mode experimental data was taken. Additionally, efficiency calibration measurements with calibrated neutron sources were conducted. The LLNL developed codes BIGFIT and OSANTI RESTART will be used to evaluate the measured data and calculate the experimental multiplication.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗