Engineering topics

Held, D. N.

Publications and source records attributed to Held, D. N..

At least 19 records

NASA NTRS1989

Compression Of Data In Imaging Radar Polarimetry

Algorithms developed to reduce number of radar polarimetric data processed to synthesize image of arbitrary combination of transmitting and receiving polarizations. Brings image-processing requirements within computing capabilities of typical users, without degrading images excessively. In scattering-matrix approach to reduction of image data, four adjacent picture elements combined into one by synthesizing new scattering matrix from scattering matrices of four elements. In phase-matrix approach, phase matrices generated from scattering matrices of four adjacent picture elements, and four phase matrices added to combine four picture elements into one.

Zebker, H. A.↗

NASA NTRS1988

The NASA/JPL multifrequency, multipolarisation airborne SAR system

Polarimetric synthetic aperture radars, operating at L-, C- and P-band, were designed to replace and upgrade a system destroyed in an aircraft accident. Ground and flight tests were conducted, and the radar was flown over a calibration site in a sequence of experiments designed to calibrate the system. The radar also took part in science campaigns.

Held, D. N.↗

NASA NTRS1986

Imaging radar polarimetry from wave synthesis

It is shown that it is possible to measure the complete scattering matrix of an object using data acquired on a single aircraft pass, and combine the signals later in the data processor to generate radar images corresponding to any desired combination of transmit and receive polarization. Various scattering models predict different dependence on polarization state of received power from an object. The imaging polarimeter permits determination of this dependence, the polarization signature, of each point in a radar image. Comparison of predictions and observational data reveals scattering mechanisms for each area of interest. Backscatter from the ocean is highly polarized and well-modeled by Bragg scattering, while scattering from trees in a city park possesses a considerable unpolarized component. Urban regions exhibit the characteristics expected from dihedral corner reflectors, and their polarization signatures are quite different from the on-bounce Bragg model.

Zebker, H. A.↗

NASA NTRS1986

External calibration of SIR-B Imagery with area-extended and point targets

Data collected by the Shuttle Imaging Radar-B (SIR-B) on two ascending orbits over a site in west-central Illinois were used to establish end-to-end transfer functions for conversion of the digital numbers on the eight-bit image to values of the radar backscattering coefficient, sigma(0). The transfer function for each data take was defined by the SIR response to an array of six calibrated point targets of known radar cross section and to a large number of area-extended targets, also with a known cross section, as measured by externally calibrated, truck-mounted scatterometers. In spite of variance in the SIR transmit power, end-to-end transfer functions generated from either point targets or area-extended targets were found to yield close agreement for a given pass, indicating that targets of known radar cross section can be used to provide transfer functions for orbital SAR. Although the use of area-extended targets yielded the most satisfactory results, the use of point targets is far simpler and may be the preferred alternative for many situations.

Dobson, M. C.↗

NASA NTRS1986

Adaptive Quantizer for Burst Synthetic-Aperture Radar

Adaptive quantizer for burst-mode synthetic-aperture radar reduces data rate of return signal. Device, called block floating-point quantizer (BFPQ) basically analog-to-digital converter that covers wide dynamic range and discards appropriate lower order bits. BFPQ is, in effect, digital approximator with automatic gain control. Moves floatingpoint marker binary representation of signal data in accordance with perceived dynamic range. Available step sizes thus limited to multiples of underlying smallest quantization step (represented by lowest order bit). Retains only first K most significant bits of signal; (L,K) BFPQ is one that does K-bit quantization of signal originally quantized to L bits. Quantization error simply difference between actual signal level and its binary approximation. Other potential applications for BFPQ include speech compression and picture data compression.

Joo, T. H.↗

NASA NTRS1985

External calibration of SIR-B imagery with area-extended and point targets

Data-takes on two ascending orbits of the Shuttle Imaging Radar-B (SIR-B) over an agricultural test site in west-central Illinois were used to establish end-to-end transfer functions for conversion of the digital numbers on the 8-bit image to values of the radar backscattering coefficient sigma sup 0 (sq m/sq. m) in dB. The transfer function for each data-take was defined by the SIR-B response to an array of six calibrated point targets of known radar cross-section (transponders) and to a large number of area-extended targets also with known radar cross-section as measured by externally calibrated, truck-mounted scatterometers. The radar cross-section of each transponder at the SIR-B center frequency was measured on an antenna range as a function of local angle of incidence. Two truck-mounted scatterometers observed 20 to 80 agricultural fields daily at 1.6 GHz with HH polarization and at azimuth viewing angles and incidence angles equivalent to those of the SIR-B. The form of the transfer function is completely defined by the SIR-B receiver and the incoherent averaging procedure incorporated into production of the standard SIR-B image product.

Dobson, M. C.↗

NASA NTRS1985

NASA/JPL Aircraft SAR Workshop Proceedings

Speaker-supplied summaries of the talks given at the NASA/JPL Aircraft SAR Workshop on February 4 and 5, 1985, are provided. These talks dealt mostly with composite quadpolarization imagery from a geologic or ecologic prespective. An overview and summary of the system characteristics of the L-band synthetic aperture radar (SAR) flown on the NASA CV-990 aircraft are included as supplementary information. Other topics ranging from phase imagery and interferometric techniques classifications of specific areas, and the potentials and limitations of SAR imagery in various applications are discussed.

Donovan, N.↗

NASA NTRS1985

Radar system description

A brief overview is given of the hardware and software utilized to generate the CV-990 synthetic aperture radar's image products. The on-board hardware is described, then the operational processing software, and finally the image products that are routinely available.

Held, D. N.↗

NASA NTRS1985

CV-990 L-band SAR: A calibration experiment

Calibrated image data is required by most users of synthetic aperture radar (SAR) data particularly those attempting to classify targets based upon their radar backscatter signature as a function of frequency polarization or incidence angle. In this experiment, the backscatter derived by calibrating the NASA/JPL CV-990 L-band SAR, and the backscatter reported from a pass of the NASA/JSC C-130 scatterometer as the two instruments flew over the same site at different times are compared.

Held, D. N.↗

NASA NTRS1985

Vegetation canopy discrimination and biomass assessment using multipolarized airborne SAR

Multipolarized airborne Synthetic Aperture Radar (SAR) data were acquired over a largely agricultural test site near Macomb, Illinois, in conjunction with the Shuttle Imaging Radar (SIR-B) experiment in October 1984. The NASA/JPL L-band SAR operating at 1.225 GHz made a series of daily overflights with azimuth view angles both parallel and orthogonal to those of SIR-B. The SAR data was digitally recorded in the quadpolarization configuration. An extensive set of ground measurements were obtained throughout the test site and include biophysical and soil measurements of approximately 400 agricultural fields. Preliminary evaluation of some of the airborne SAR imagery indicates a great potential for crop discrimination and assessment of canopy condition. False color composites constructed from the combination of three linear polarizations (HH, VV, and HV) were found to be clearly superior to any single polarization for purposes of crop classification. In addition, an image constructed using the HH return to modulate intensity and the phase difference between HH and VV returns to modulate chroma indicates a clear capability for assessment of canopy height and/or biomass. In particular, corn fields heavily damaged by infestations of corn borer are readily distinguished from noninfested fields.

Ulaby, F. T.↗

NASA NTRS1985

Target Simulator for Synthetic-Aperture Radars

In proposed Target Simulator for Testing Synthetic-Aperture Radars, radar transmitter output received, mixed down to video frequencies, and passed through variable digital delay. Delayed signal mixed up to original carrier frequency and transmitted back to radar. Synthetic-aperture radar (SAR) generates return signal that contains range-curvature information in addition to Doppler-frequency information.

Zebker, H. A.↗

NASA NTRS1985

Doppler parameter estimation for spaceborne synthetic-aperture radars

Problems in the determination of Doppler parameters for spaceborne synthetic-aperture radar (SAR) data processing are examined. The degradations in image quality due to errors in these parameters are summarized. It is shown that these parameters can be estimated using accurate spacecraft ancillary data. In cases where such data are not available, two techniques are proposed to estimate these parameters using the coherent radar return. These techniques were tested with the Seasat SAR data and the test results demonstrate that the accuracies achieved exceed the system performance requirements. Possible applications of these techniques in other areas of SAR data utilization are briefly discussed.

Li, F.-K.↗

NASA NTRS1985

An adaptive quantization method for burst mode synthetic aperture radar data

Synthetic aperture radar (SAR) has high data rate because it collects and processes the data coherently. The data rate limitation of the system has to be satisfied while maintaining good image quality. Thus, a quantizer with minimum data rate and high SNR should be employed. An adaptive quantization method is proposed for the burst mode SAR. This adaptive quantizer uses uniformly quantized data to select a subset of bits which is equivalent to changing the step size of the uniform quantizer. A simple implementation which uses the previous burst data to compute the local statistics for the bit selection is presented. The use of previous burst simplifies the implementation because it does not require storage or delay; however, an abrupt change in the terrain could result in incorrect bit selection. An error analysis of this implementation and comparison of two burst mode SAR images formed using the uniformly quantized and adaptively quantized data is presented.

Joo, T. H.↗

NASA NTRS1985

The NASA/JPL multipolarization SAR aircraft program

The NASA/JPL aircrft program has been in existence for more than a decade. However, during the past two years, there has been a dramatic increase in the capability and scientific utility of this system as an L-band, 4-polarization synthetic aperture radar (SAR) system has become operational. The system is capable of simultaneously and coherently acquiring four independent complex polarization measurements for every pixel in the image. This capability has been exploited by a number of experimenters to generate several new data types that appear to contain significantly more information than was previously available from single or dual polarized SAR systems. The system will ultimately be capable of estimating the entire complex scattering matrix for every pixel on the ground. Within the next year the system will be extended to C-band so that it will be possible to simultaneously acquire 4-polarization imagery at L-band and C-band. This system will be the prototype for the SIR-C experiment that will have similar capabilities and be flown on the Space Shuttle in 1989.

Held, D. N.↗

NASA NTRS1985

Radio phase characteristics of terrain from multipolarized synthetic aperture radar data

Recent advances in digital data acquisition and signal processing technology permit simultaneous measurement of the complex (amplitude and phase) radar backscatter from several polarization-diverse antennas. While absolute phase mesurements remain to be analyzed in detail. The differential phase of signals polarized parallel and perpendicular to the plane of incidence provide information on the scattering mechanisms that dominate the interaction of the radio waves with the terrain. Analysis of phase backscatter maps from a typical urban area yields a bimodal distribution with the two peaks separated by approximately 180 degrees, highly indicative of a dominant simple geometric one bounce-two bounce mechanism. Some maps of agricultural areas exhibit a similar distribution, however, other agricultural areas yield a distribution that, while still bimodal, consists of two peaks separated by about 110 deg. Still other agricultural areas exhibit a more complex distribution. All of the observed phase shifts appear to be independent of incidence angle from at least 20 deg to 55 deg, therefore the 110 degree shifts are inconsistent with both the geometric model used for the urban area and with common dielectric slab models.

Zebker, H. A.↗

NASA NTRS1984

Detecting Deformations in Phased-Array Antennas

Doppler technique detects deformation of large phased array radar antenna. Antenna electrically split into subarrays; individual phases measured when examination of antenna stability and provides information for correcting deformation.

Li, F. K.↗

NASA NTRS1984

Amplitude calibration experiment for SIR-B

The objectives, approach, and expected results of the amplitude calibration experiment for the Shuttle Imaging Radar-B (SIR-B) are outlined. Specific objectives include: (1) the determination of the repeatability (stability) of the SIR-B; (2) the absolute and relative calibration of the system; and (3) the ground truth verification of the calibration accuracy using measurements made by a ground spectrometer and an airborne synthetic aperture radar.

Held, D. N.↗

NASA NTRS1984

Synthetic aperture radar target simulator

A simulator for simulating the radar return, or echo, from a target seen by a SAR antenna mounted on a platform moving with respect to the target is described. It includes a first-in first-out memory which has digital information clocked in at a rate related to the frequency of a transmitted radar signal and digital information clocked out with a fixed delay defining range between the SAR and the simulated target, and at a rate related to the frequency of the return signal. An RF input signal having a frequency similar to that utilized by a synthetic aperture array radar is mixed with a local oscillator signal to provide a first baseband signal having a frequency considerably lower than that of the RF input signal.

Zebker, H. A.↗