Search NASA⌕ Search

Engineering topics

Heldebrant, David J

Publications and source records attributed to Heldebrant, David J.

At least 19 records

Capture and release of acid-gasses with acid-gas binding organic compounds

A system and method for acid-gas capture wherein organic acid-gas capture materials form hetero-atom analogs of alkyl-carbonate when contacted with an acid gas. These organic-acid gas capture materials include combinations of a weak acid and a base, or zwitterionic liquids. This invention allows for reversible acid-gas binding to these organic binding materials thus allowing for the capture and release of one or more acid gases. These acid-gas binding organic compounds can be regenerated to release the captured acid gasses and enable these organic acid-gas binding materials to be reused. This enables transport of the liquid capture compounds and the release of the acid gases from the organic liquid with significant energy savings compared to current aqueous systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO2-Binding Organic Liquids Gas Capture with Polarity-Swing-Assisted Regeneration Full Technology Feasibility Study B1 - Solvent-based Systems

PNNL, Fluor Corporation and Queens University (Kingston, ON) successfully completed a three year comprehensive study of the CO2BOL water-lean solvent platform with Polarity Swing Assisted Regeneration (PSAR). This study encompassed solvent synthesis, characterization, environmental toxicology, physical, thermodynamic and kinetic property measurements, Aspen Plus™ modeling and bench-scale testing of a candidate CO2BOL solvent molecule. Key Program Findings The key program findings are summarized as follows: • PSAR favorably reduced stripper duties and reboiler temperatures with little/no impact to absorption column • >90% CO2 capture was achievable at reasonable liquid-gas ratios in the absorber • High rich solvent viscosities (up to 600 cP) were successfully demonstrated in the bench-scale system. However, the projected impacts of high viscosity to capital cost and operational limits compromised the other levelized cost of electricity benefits. • Low thermal conductivity of organics significantly increased the required cross exchanger surface area, and potentially other heat exchange surfaces. • CO2BOL had low evaporative losses during bench-scale testing • There was no evidence of foaming during bench scale testing • Current CO2BOL formulation costs project to be $35/kg • Ecotoxicity (Water Daphnia) was comparable between CO2BOL and MEA (169.47 versus 103.63 mg/L) • Full dehydration of the flue gas was determined to not be economically feasible. However, modest refrigeration (13 MW for the 550 MW reference system) was determined to be potentially economically feasible, and still produce a water-lean condition for the CO2BOLs (5 wt% steady-state water loading). • CO2BOLs testing with 5 wt% water loading did not compromise anhydrous performance behavior, and showed actual enhancement of CO2 capture performance. • Mass transfer of CO2BOLs was not greatly impeded by viscosity • Facile separation of antisolvent from lean CO2BOL was demonstrated on the bench cart • No measurable solvent degradation was observed over 4 months of testing – even with 5 wt% water present

Heldebrant, David J↗

CO2-Triggered Switchable Solvents, Surfactants, and Other Materials

Waste CO2 at atmospheric pressure can be used to trigger dramatic changes in the properties of certain switchable materials. Compared to other triggers such as light, acids, oxidants, CO2 has the advantages that it is inexpensive, nonhazardous, non-accumulating in the system, easily removed, and it does not require the material to be transparent. Known CO2-triggered switchable materials 10 now include solvents, surfactants, solutes, catalysts, particles, polymers, and gels. The added flexibility of switchable materials represents a new strategy for minimizing energy and material consumption in process and product design.

36 MATERIALS SCIENCE↗

Switchable solvents and methods of use thereof

A solvent that reversibly converts from a nonionic liquid mixture to an ionic liquid upon contact with a selected trigger, e.g., contact with CO.sub.2, is described. In preferred embodiments, the ionic solvent is readily converted back to the nonionic liquid mixture. The nonionic liquid mixture includes an amidine or guanidine or both, and water, alcohol, or a combination thereof. Single component amine solvents that reversibly convert between ionic and non-ionic states are also described. Some embodiments require increased pressure to convert; others convert at 1 atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO 2 -binding Organic Liquids, an Integrated Acid Gas Capture System

Amine systems are effective for CO 2 capture, but they are still inefficient because the solvent regeneration energy is largely defined by the amount of water in the process. Most amines form heat-stable salts with SO 2 and COS resulting in parasitic solvent loss and degradation. Stripping the CO 2 -rich solvent is energy intensive it requires temperatures above 100 °C due to the high specific heat and heat of vaporization of water. CO 2 -capture processes could be much more energy efficient in a water free amine process. In addition, if the capture-material is chemically compatible with other acid gases, less solvent would be lost to heat-stable salts and the process economics would be further improved. One such system that can address these concerns is Binding Organic Liquids (BOLs), a class of switchable ionic liquids.

54 ENVIRONMENTAL SCIENCES↗

Process for synthesis of ammonia borane for bulk hydrogen storage

The present invention discloses new methods for synthesizing ammonia borane (NH.sub.3BH.sub.3, or AB). Ammonium borohydride (NH.sub.4BH.sub.4) is formed from the reaction of borohydride salts and ammonium salts in liquid ammonia. Ammonium borohydride is decomposed in an ether-based solvent that yields AB at a near quantitative yield. The AB product shows promise as a chemical hydrogen storage material for fuel cell powered applications.

08 HYDROGEN↗

Synthesis, characterization and application of alkanolamidines and alkanolguanidines in CO(2) capture

Global carbon dioxide (CO2) emission to the atmosphere is partly responsible for climate change. In order to mitigate these environmental effects CO2 capture and storage is required. Solvents currently used for this application are the energy intensive aqueous amines. Here we present the synthesis, characterization and CO2 uptake of new advanced solvents called alkanolamidines and alkanolguanidines otherwise known as CO2-binding organic Liquids (CO2BOLs). These solvents have been designed to have decreased vapor pressure and low viscosity in order to increase the CO2 uptake capacity while minimizing evaporative losses. Alkanolamidines were synthesized in 1-3 steps from commercially available materials. These compounds bind CO2 chemically via the alcohol moiety forming zwitterionic alkylcarbonates. The alkanolamidines can be regenerated thermally by heating the alkylcarbonate to 75 °C. CO2 binding capacities up to 10 wt% were achieved using these compounds. These compounds have the potential to be energy efficient CO2 capture solvents.

54 ENVIRONMENTAL SCIENCES↗

Performance of Single-Component CO2-Binding Organic Liquids (CO2BOLs) For Post Combustion CO2 Capture

We report the performance of multiple CO2 binding organic liquids (CO2BOLs) as solvent systems for post combustion gas capture. Alkanolguanidines and alkanolamidines are single component CO2BOLs that reversibly bind CO2 chemically as liquid zwitterionic amidinium / guanidinium alkylcarbonates. Select alkanolguanidines/alkanolamidines and guanidine/alcohol mixtures were tested for CO2 capacity and solvent lifetime. Solvent performance of these three CO2BOLs was assessed by batchwise CO2 uptake and release over multiple cycles. We report each CO2BOL’s activity and solvent durability with and without water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acid Gas Capture Using CO2-Binding Organic Liquids

Current chemical CO2 scrubbing technology is primarily aqueous alkanolamine based. These systems rapidly bind CO2 (forming water-soluble carbamate and bicarbonate salts) however, the process has serious disadvantages. The concentration of monoethanolamine rarely exceeds 30 wt % due to the corrosive nature of the solution, and this reduces the maximum CO2 volumetric (≤108 g/L) and gravimetric capacity (≤7 wt%) of the CO2 scrubber. The ≤30 wt % loading of ethanolamine also means that a large excess of water must be pumped and heated during CO2 capture and release, and this greatly increases the energy requirements especially considering the high specific heat of water (4 j/g-1K-1). Our approach is to switch to organic systems that chemically bind CO2 as liquid alkylcarbonate salts. Our CO2-binding organic liquids have higher CO2 solubility, lower specific heats, potential for less corrosion and lower binding energies for CO2 than aqueous systems. CO2BOLs also reversibly bind and release mixed sulfur oxides. Furthermore the CO2BOL system can be direct solvent replacements for any solvent based CO2 capture systems because they are commercially available reagents and because they are fluids they would not require extensive process re-engineering.

54 ENVIRONMENTAL SCIENCES↗

The diammoniate of diborane: Crystal structure and hydrogen release

[(NH3)2BH2]+[BH4]- is formed from the room temperature decomposition of NH4+BH4-, via a NH3BH3 intermediate. Its crystal structure has been determined and contains disordered BH4- ions in 2 distinct sites. Hydrogen release is similar to that from NH3BH3 but with faster kinetics.

08 HYDROGEN↗

Capture and release of mixed acid gasses with binding organic liquids

Reversible acid-gas binding organic liquid systems that permit separation and capture of one or more of several acid gases from a mixed gas stream, transport of the liquid, release of the acid gases from the ionic liquid and reuse of the liquid to bind more acid gas with significant energy savings compared to current aqueous systems. These systems utilize acid gas capture compounds made up of strong bases and weak acids that form salts when reacted with a selected acid gas, and which release these gases when a preselected triggering event occurs. The various new materials that make up this system can also be included in various other applications such as chemical sensors, chemical reactants, scrubbers, and separators that allow for the specific and separate removal of desired materials from a gas stream such as flue gas.

Heldebrant, David J↗

Reversible Acid Gas Capture Using CO2-Binding Organic Liquids

Acid gas scrubbing technology is predominantly aqueous alkanolamine based. Of the acid gases, CO2, H2S and SO2 have been shown to be reversible, however there are serious disadvantages with corrosion and high regeneration costs. The primary scrubbing system composed of monoethanolamine is limited to 30% by weight because of the highly corrosive solution. This gravimetric limitation limits the CO2 volumetric (≤108 g/L) and gravimetric capacity (≤7 wt%) of the system. Furthermore the scrubbing system has a large energy penalty from pumping and heating the excess water required to dissolve the MEA bicarbonate salt. Considering the high specific heat of water (4 j/g-1K-1), low capacities and the high corrosion we set out to design a fully organic solvent that can chemically bind all acid gases i.e. CO2 as reversible alkylcarbonate ionic liquids or analogues thereof. Having a liquid acid gas carrier improves process economics because there is no need for excess solvent to pump and to heat. We have demonstrated illustrated in Figure 1, that CO2-binding organic liquids (CO2BOLs) have a high CO2 solubility paired with a much lower specific heat (<1.5 J/g-1K-1) than aqueous systems. CO2BOLs are a subsection of a larger class of materials known as Binding Organic Liquids (BOLs). Our BOLs have been shown to reversibly bind and release COS, CS2, and SO2, which we denote COSBOLS, CS2BOLs and SO2BOLs. Our BOLs are highly tunable and can be designed for post or pre-combustion gas capture. The design and testing of the next generation zwitterionic CO2BOLs and SO2BOLs are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of a New Phase of Ammonia Borane

An uncharacterized phase of ammonia borane (AB) was previously identified while investigating its thermal decomposition. This phase was identified as a key intermediate for the release of hydrogen from AB prompting the current characterization study. The new phase was investigated extensively using in situ solid state MAS NMR spectroscopy, including 11B, 15N and 1H NMR. Single-pulse excitation, cross polarization and T1 relaxation experiments collectively demonstrate a significant increase in mobility for the new phase when compared to the room temperature crystalline phase of AB. However, the data are not completely consistent with a liquid phase. The data are also not consistent with a solid phase, but are most consistent with a phase best described as “liquid-like”. This implies a disruption of the long-range order which is primarily stabilized by the extensive dihydrogen bonding network, allowing increased motional freedom. X-ray diffraction and Raman thermal decomposition data of neat AB provide support for a disordered phase, as does data of AB immobilized into a mesoporous scaffold. These observations suggest that a breakdown of the extensive hydrogen bonding network is necessary before hydrogen can be released and will be an important factor in the practical use of AB as a hydrogen storage material. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

Synthesis, characterization and performance of single-component CO2-binding organic liquids (CO2BOL) for post combustion CO2 capture

Carbon dioxide (CO2) emission to the atmosphere will increase significantly with the shift to coal powered plants for energy generation. This increase in CO2 emission will contribute to climate change. There is need to capture and sequester large amounts of CO2 emitted from these coal power plants in order to mitigate the environmental effects. Here we report the synthesis, characterization and system performance of multiple third generation CO2 binding organic liquids (CO2BOLs) as a solvent system for post combustion gas capture. Alkanolguanidines and alkanolamidines are single component CO2BOLs that reversibly bind CO2 chemically as liquid zwitterionic amidinium / guanidinium alkylcarbonates. Three different alkanolguanidines and alkanolamidines were synthesized and studied for CO2 capacity and binding energetics. Solvent performance of these three CO2BOLs was evaluated by batch-wise CO2 uptake and release over multiple cycles. Synthesis of CO2BOLs, characterization, CO2 uptake, selectivity towards CO2 as well as solvent tolerance to water will be discussed.

01 COAL, LIGNITE, AND PEAT↗

Aqueous Phase Reforming of Glycerol for Hydrogen Production Over Pt-Re Supported on Carbon

Hydrogen production from the aqueous phase reforming of glycerol over several 3%Pt-Re/C catalysts (1-4.5% Re) has been studied in the absence and presence of base, and the results compared with a Re-free 3%Pt/C catalyst. Although the Pt/C catalyst is very selective toward the production of hydrogen, catalytic activity is low. Addition of Re significantly increases the conversion of glycerol, at some loss of hydrogen selectivity to light hydrocarbons and water-soluble oxygenates. Addition of 1%KOH to the feedstock increases the selectivity of the Pt-Re/C catalysts toward hydrogen, but selectivity toward aqueous phase oxygenates also increases except for 3%Pt-3%Re/C, where it remains constant. The increase in hydrogen selectivity with base addition arises primarily from reducing the selectivity toward methane and higher alkanes, products that consume H2. For comparison, KOH addition to the glycerol feed with the Re-free 3%Pt/C catalyst provides an increase in glycerol conversion but results in a decline in both H2 and alkanes relative to aqueous phase oxygenates. This indicates that alternative pathways have been enabled by base addition. The highest hydrogen productivity among the catalysts tested is achieved with a 3%Pt-3%Re/C catalyst with added KOH base, but this hydrogen productivity declines with time on stream. The observed product distributions as well as deactivation with base can be understood in terms of the different reaction pathways that become emphasized depending on catalyst composition and pH.

03 NATURAL GAS↗

A reversible zwitterionic SO 2 -binding organic liquid

As fossil fuel consumption continues, there is much attention being focused on capturing acid gas emissions from power plants. We have recently investigated SO 2 -binding organic liquids (SO 2 BOLs) as means to reversibly capture and release SO 2 selectively over CO 2 .1 SO 2 BOLs are mixtures of tertiary amines and alcohols, which bind SO 2 as liquid ammonium alkylsulfite salts. Tertiary amines selectively bind SO 2 over CO 2 because tertiary amines are basic enough to accept a proton from sulfurous and alkylsulfurous acids but not carbonic or alkylcarbonic acids. This is in contrast to other groups who absorb SO 2 physically in ionic liquids2-4 or chemically absorb SO 2 in organic systems5-7 or as irreversible aqueous bisulfite or sulfite salts.8-11 Our dual component SO 2 BOL ionic liquids can contain up to 47% SO 2 by mass, have low specific heats, and can be desulfoxylated by heating to 90ºC.1 We believed that a bifunctional tertiary alkanol amine would be able to capture SO 2 comparable to our binary SO 2 BOL system. We present here the first reversible zwitterionic liquid produced from the reaction of SO 2 with N,N-dibutylundecanolamine (DBUA). The SO 2 is chemically bound through the alcohol moiety as an alkylsulfite, which we believe is stabilized by hydrogen bonding through the protonated amine portion of the molecule. Our recent interest in SO 2 BOLs led us to explore the possible reaction of aprotic alkanolamines with SO 2 to form single-component SO 2 BOLs. A symbiotic pairing of the base and the alcohol on one molecule allows for a simple unimolecular system compared to the binary SO 2 BOL system. The bifunctional molecule also would have reduced volatility compared to tertiary amines due to increased hydrogen bonding from the alcohol moiety. To our knowledge there are few examples of zwitterionic liquids, and none of them have been shown to be reversible (polar to non-polar).12-14 Our first target molecule was N,N-dibutylundecanolamine because we envisioned long alkyl chains keeping the alkanolamine a liquid before and after exposure to SO 2 . N,N-dibutyldodecanolamine was synthesized in 88% isolated yield by refluxing dibutylamine and 11-bromoundecanol in ethanol.

08 HYDROGEN↗

Thermodynamic and Structural Investigations of Ammonium Borohydride, a Solid with a Highest Content of Thermodynamically and Kinetically Accessible Hydrogen

The US DOE issued a Grand Challenge for Basic Research Needs for the Hydrogen Economy calling in part for significant new breakthroughs in novel materials and approaches to store hydrogen on-board fuel cell powered vehicles. The Challenge specified several technical criteria for hydrogen storage materials that are necessary to provide sufficient energy density to drive a Fuel Cell powered vehicle >300 miles between refueling. The formation of AB catalyzing the decomposition of NH4BH4 to DADB and hydrogen provides insight into why NH4BH4 appears to be less stable than predicted by electronic structure theory. Further work is planned to investigate the structure of NH4BH4 by neutron diffraction to see if it is possible to induce a phase change at lower temperatures to the zincblende structure predicted to be the most stable structure at 0 K. This work was supported by the Office of Basic Energy Sciences, Chemical Sciences Division of the U.S. Department of Energy (DOE). A portion of the research described in this paper was performed in the W.R. Wiley Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Pacific Northwest National Laboratory is operated for the DOE by Battelle.

08 HYDROGEN↗

Reversible uptake of COS, CS2 and SO2; Ionic liquids with O-alkylxanthate, O-alkylthiocarbonate, and O-alkylsulfite anions

Further development of CO2 binding organic liquids to capture and release carbonyl sulfide, carbon disulfide and sulfur dioxide. This paper investigates a brand new class of ionic liquids which have potential as chemical sensors for acid gas capture. Applications to flue gas scrubbing are discussed with an emphasis on capture and release of COS, CS2 and SO2 with amidine and guanidine bases with alcohols. Formal spectroscopic characterization is presented.

54 ENVIRONMENTAL SCIENCES↗