Engineering topics

Hellawell, A.

Publications and source records attributed to Hellawell, A..

15 records

NASA NTRS1996

Some Consequences of Thermosolutal Convection: The Grain Structure of Castings

The essential principles of thermosolutal convection are outlined, and how convection provides a transport mechanism between the mushy region of a casting and the open bulk liquid is illustrated. The convective flow patterns which develop assist in heat exchange and macroscopic solute segregation during solidification; they also provide a mechanism for the transport of dendritic fragments from the mushy region into the bulk liquid. Surviving fragments become nuclei for equiaxed grains and so lead to blocking of the parental columnar, dendritic growth front from which they originated. The physical steps in such a sequence are considered and some experimental data are provided to support the argument.

Hansen, G.↗

NASA NTRS1996

Communications: Mechanical Deformation of Dendrites by Fluid Flow

It is generally accepted that liquid agitation during alloy solidification assists in crystal multiplication, as in dendrite fragmentation and the detachment of side arms in the mushy region of a casting. Even without deliberate stirring by electromagnetic or mechanical means, there is often vigorous interdendritic fluid flow promoted by natural thermosolutal convection. In this analysis, we shall estimate the stress at the root of a secondary dendrite arm of aluminum arising from the action of a flow of molten metal past the dendrite arm.

Pilling, J.↗

NASA NTRS1995

The Grain Structure of Castings: Some Aspects of Modelling

The efficacy of the modelling of the solidification of castings is typically tested against observed cooling curves and the final grain structures and sizes. Without thermo solutal convection, equiaxed grain formation is promoted by introduction of heterogeneous substrates into the melt, as grain refiners. With efficient thermo solutal convection, dendrite fragments from the mushy zone can act as an intrinsic source of equiaxed grains and resort to grain refining additions is unnecessary. The mechanisms of dendrite fragmentation and transport of these fragments are briefly considered.

Hellawell, A.↗

NASA NTRS1991

Use of NH4Cl-H2O Analogue Castings to Model Aspects of Continuous Casting: Columnar-Equiaxed Grain Transition and Crystal Sedimentation Rates - Part 2

In this paper, aspects of the columnar-equiaxed transition with particular reference to the rates of sedimentation of equiaxed crystals and analysis of measured values are considered. The attempt is made to compare data from an aqueous analogue system with those expected in a metal, specifically, from NH4CI-70 wt-%H20 and Fe-0.2 wt-%C.

Jang, J.↗

NASA NTRS1991

Use of NH4Cl-H2O Analogue Castings to Model Aspects of Continuous Casting: Asymmetry in Inclined Moulds - Part 1

Crystallisation of NH4Cl from aqueous solutions has been used to examine grain formation in a configuration similar to that existing in the curved mould of a continuous, steel casting machine. The observations show how falling equiaxed crystals accumulate at the lower (outer) columnar front earlier than at the upper (inner) front and, thus, lead to an asymmetric grain structure. The usefulness of the aqueous system as a realistic model for steel casting is discussed in terms of relative temperature profiles, materials properties, and observed columnar and eutectic growth rates.

Jang, J.↗

NASA NTRS1990

Planetary materials and resource utilization: An interdisciplinary engineering design course at Michigan Technological University

A new course was developed and instituted in the spring quarter of 1989 dealing with topics related to space resource utilization and related engineering. The course development required a concerted, coordinated effort, because a similar course which might be used as a guide could not be identified anywhere and the interdisciplinary perspective that was required was not identified anywhere on the university campus. Students in the class worked on interdisciplinary design projects which culminated in papers and oral presentations. Each of the six design groups consisted of several engineers with different disciplinary roots. The entire course lecture sequence, about 50 hours in all, was videotaped. Discussed here are the authors' experiences in developing the course, including the course syllabus and speaker list.

Rose, W. I.↗

NASA NTRS1988

The surface morphology of crystals melting under solutions of different densities

Examples of solids melting beneath liquids are described for cases where the bulk liquid volume is stabilized against convection by a positive vertical temperature gradient, either with, or without local density inversion at the melting interface. The examples include ice melting beneath brine or methanol solutions and tin or lead melting under molten Sn-20 wt pct Pb or Pb-20 wt pct Sn, respectively. Without density inversion the melting is slow, purely diffusion controlled and the interfaces are smooth; with convection assisted melting the rate increases by some two orders of magnitude and the interfaces develop a rough profile - in the case of ice both irregular and quasi-steady state features are observed. The observations are discussed in terms of prevailing temperature and concentration gradients.

Fang, Dacheng↗

NASA NTRS1988

Channel formation in Pb-Sn, Pb-Sb, and Pb-Sn-Sb alloy ingots and comparison with the system NH4Cl-H2O

The formation of segregation channels during the unidirectional solidification of base chilled ingots has been studied as a function of composition in binary Pb-Sn and Pb-Sb and ternary Pb-Sn-Sb alloys. The patterns of channel distribution were characterized in the binary and ternary systems and are described as functions of temperature gradients, growth rates, dendrite spacings, and interdendritic permeabilities. Channels appear to nucleate at random across a dendritic front and subsequently to interact as they propagate, decreasing in density across the front. Assuming that the interdendritic spacing is the characteristic distance for a liquid perturbation, yields critical effective Rayleigh numbers which lie within a factor of x 40 for both metallic and aqueous systems. This correlation is close, considering the sensitivity to any assumed dimension and the range of material properties involved, and is taken to support a model for channel nucleation occurring close to the dendritic growth front.

Hellawell, A.↗

NASA NTRS1987

Local convective flows in partly solidified alloys

Channel formation in a dendritic mushy zone is examined with reference to experimental results obtained for an acqueous system, NH4Cl-H2O, and a low-melting metallic system, Pb-Sn. The problems of channel nucleation, propagation, and prevention are considered for a configuration in which heat flow is directed downwards and growth occurs upwards into a positive temperature gradient. It is found that channels nucleate at the growth front by double diffusive perturbations into the quiescent bulk liquid, and not by perturbations within the dendritic framework of the mushy zone.

Hellawell, A.↗

NASA NTRS1985

The Development and Prevention of Channel Segregation During Alloy Solidification

During alloy solidification, interdendritic microsegregation causes density differences between entrapped liquid and bulk liquid which provides a driving force for convection. One of the consequences of this effect is the formation of long, nearly vertical liquid channels, rich in solute, flowing through the solid-liquid mushy zone somewhat as a river and tributary system. In ingot castings where the heat flow is vertically downwards and the solute less dense than the solute the convective flow is antiparallel with the flow caused by contraction on freezing. Identification of the mechanisms involved in these two problems is discussed. It is known that certain types of bulk liquid movements can inhibit channel development and the mechanism by which they do so are examined.

Hellawell, A.↗

NASA NTRS1984

The mechanisms of formation and prevention of channel segregation during alloy solidification

Using a base chilled configuration, conditions for the formation and prevention of segregation channels are studied in the ammonium chloride-water and lead-tin systems. Such channels develop when the rejected solute is less dense than the solvent and are therefore a result of density inversion, but slow (less than 5 rpm) rates of mold rotation, about axes inclined to the vertical by 20 to 30 deg, throughout the time of solidification, effectively prevent the formation or propagation of these channels. In experiments with artificially created or blocked channels, a simultaneous solute plume in the bulk liquid must be present in order for a channel to develop. The results indicate that channels originate not within the dendritic array, but immediately ahead of the growth front as a result of perturbation from the less dense boundary layer into the bulk liquid. The effect of mold movement is to translate laterally the bulk liquid relative to the growth front so that perturbations are sheared off. The nature of the liquid movement is considered and shown to be a function of the mold dimensions.

Hellawell, A.↗

NASA NTRS1984

The breakdown of fibrous structures in directionally grown monotectic alloys

The breakdown of aligned steady-state metallic growth products from the reversible monotectic reaction liquid (L1) yields solid (S1) + liquid (L2) is analyzed experimentally. Consideration is given to the temperatures of the monotectic horizontal, to upper consolute temperature of the liquid miscibility gap which through the relative liquid and solid surface energies determines whether the reaction is capable of steady-state growth; the growth characteristics of the solid (faceted or nonfaceted); and the relative whetting characteristics of parent and product phases with the glass cell walls. Schematic drawings and composite photographs are provided which illustrate the development of steady-state growth and the related changes in phase sickness of the reaction product.

Grugel, R. N.↗

NASA NTRS1984

The solidification of monotectic alloys - Microstructures and phase spacings

The microstructures of directionally grown monotectic alloys in metallic and organic systems fall into two categories those which can form aligned fibrous composite structures with even phase spacings and fiber sections, and those in which the phase distribution is coarser and less regular. This division appears to relate to the form of the phase diagram and has been rationalized by Cahn (1977, 1979) in terms of the relative surface energies between solid and two liquids to give steady state or nonsteady state profiles. The transition in growth behavior occurs when the ratio of the monotectic temperature to that of the upper consolute temperature is approximately 0.9. Differences in phase spacings between a range of monotectic and eutectic systems are discussed in terms of the expected growth interface shapes and the factors which will influence them.

Grugel, R. N.↗

NASA NTRS1983

Directional Solidification of Monotectic Alloys

Cooling at certain rates produced fibrous composite structures. Alloy samples melted in alumina or graphite crucibles under argon and then chillcast into 33-mm-diameter rods or sucked directly into 3-mm-bore alumina or silica tubes. Alloying not automatic with immiscible components of different densities and widely different melting points.

Hellawell, A.↗

NASA NTRS1982

Directional solidification of alloys in systems containing a liquid miscibility gap

The problem considered is the unidirectional growth of alloys close to monotectic composition and within the miscibility gap when the direction of gravity is down the temperature gradient (solidification upwards) or up the temperature gradient (solidification downwards). The systems Al-In and Al-Bi are taken as examples. With solidification upwards it is shown that bulk liquid composition adjusts to that of the monotectic while in the reverse situation, the bulk liquid gradually rises. In the former case it is possible to grow aligned fibrous structures of monotectic composition but in the latter the microstructures are irregular and globular.

Grugel, R. N.↗