Engineering topics

Helman, D. D.

Publications and source records attributed to Helman, D. D..

3 records

NASA NTRS1984

Fitting Flexible Coverings to Contoured Surfaces

Method using two transparent plastic sheets and polyethylene foam spacer produces flat templates from contoured surfaces. Once prepared, templates laid flat, and insulation inserted between two templates cut to shape to fit contoured surface. Sections of insulation prepared by contour-transferring technique fit contoured surfaces precisely. Procedure used for tailoring protective covers or for installation of vibrationabsorbing material over contoured surfaces.

Helman, D. D.↗

NASA NTRS1982

Method for repair of thin glass coatings

A method of repairing cracks or damaged areas in glass, in particular, glass coatings provided on tile. The method includes removing the damaged area using a high speed diamond burr drilling out a cavity that extends slightly into the base material of the tile. All loose material is then cleaned from the drilled out cavity and the cavity is filled adjacent the upper surface of the coating with a filler material including chopped silica fibers mixed with a binder. The filler material is packed into the cavity and a repair coating is applied by means of a brush or sprayed thereover. The repair includes borosilicate suspended in solution. Heat is applied at approximately 2100 F. for approximately five minutes for curing the coating, causing boron silicide particles of the coating to oxidize forming a very fluid boron-oxide rich glass which reacts with the other frits to form an impervious, highly refractory layer.

Holt, J. W.↗

NASA NTRS1979

Repairing cracked glass

Filing procedure consisting of machined lightweight fused-silica tiles coated with thin-layer of borosilicate glass produces homogeneous seal in thin glass. Procedure is useful in repairing glass envelopes, X-ray tub windows, Dewar flasks, and similar thin glass objects.

Helman, D. D.↗